@@ -430,10 +430,10 @@ static void ks_pcie_setup_rc_app_regs(struct keystone_pcie *ks_pcie)
ks_pcie_app_writel(ks_pcie, CMD_STATUS, val);
}
-static int ks_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
- unsigned int devfn, int where, int size,
- u32 *val)
+static void __iomem *ks_pcie_other_map_bus(struct pci_bus *bus,
+ unsigned int devfn, int where)
{
+ struct pcie_port *pp = bus->sysdata;
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
u32 reg;
@@ -444,25 +444,14 @@ static int ks_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
reg |= CFG_TYPE1;
ks_pcie_app_writel(ks_pcie, CFG_SETUP, reg);
- return dw_pcie_read(pp->va_cfg0_base + where, size, val);
+ return pp->va_cfg0_base + where;
}
-static int ks_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
- unsigned int devfn, int where, int size,
- u32 val)
-{
- struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
- struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
- u32 reg;
-
- reg = CFG_BUS(bus->number) | CFG_DEVICE(PCI_SLOT(devfn)) |
- CFG_FUNC(PCI_FUNC(devfn));
- if (!pci_is_root_bus(bus->parent))
- reg |= CFG_TYPE1;
- ks_pcie_app_writel(ks_pcie, CFG_SETUP, reg);
-
- return dw_pcie_write(pp->va_cfg0_base + where, size, val);
-}
+static struct pci_ops ks_child_pcie_ops = {
+ .map_bus = ks_pcie_other_map_bus,
+ .read = pci_generic_config_read,
+ .write = pci_generic_config_write,
+};
/**
* ks_pcie_v3_65_scan_bus() - keystone scan_bus post initialization
@@ -490,6 +479,12 @@ static void ks_pcie_v3_65_scan_bus(struct pcie_port *pp)
dw_pcie_writel_dbi(pci, PCI_BASE_ADDRESS_0, ks_pcie->app.start);
}
+static struct pci_ops ks_pcie_ops = {
+ .map_bus = dw_pcie_own_conf_map_bus,
+ .read = pci_generic_config_read,
+ .write = pci_generic_config_write,
+};
+
/**
* ks_pcie_link_up() - Check if link up
*/
@@ -807,6 +802,9 @@ static int __init ks_pcie_host_init(struct pcie_port *pp)
struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
int ret;
+ pp->bridge->ops = &ks_pcie_ops;
+ pp->bridge->child_ops = &ks_child_pcie_ops;
+
ret = ks_pcie_config_legacy_irq(ks_pcie);
if (ret)
return ret;
@@ -842,8 +840,6 @@ static int __init ks_pcie_host_init(struct pcie_port *pp)
}
static const struct dw_pcie_host_ops ks_pcie_host_ops = {
- .rd_other_conf = ks_pcie_rd_other_conf,
- .wr_other_conf = ks_pcie_wr_other_conf,
.host_init = ks_pcie_host_init,
.msi_host_init = ks_pcie_msi_host_init,
.scan_bus = ks_pcie_v3_65_scan_bus,
Now that DWC drivers can setup their own pci_ops for the root and child buses, convert the TI Keystone driver to use the standard pci_ops for config accesses. Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rob Herring <robh@kernel.org> --- drivers/pci/controller/dwc/pci-keystone.c | 40 ++++++++++------------- 1 file changed, 18 insertions(+), 22 deletions(-) -- 2.25.1