diff mbox series

[v2,4/6] arm64: dts: qcom: sm8250: add wsa and va codec macros

Message ID 20201202180741.16386-5-srinivas.kandagatla@linaro.org
State Superseded
Headers show
Series arm64: dts: qcom: qrb5165-rb5 audio support | expand

Commit Message

Srinivas Kandagatla Dec. 2, 2020, 6:07 p.m. UTC 
Add support for WSA and VA codec macros along with WSA soundwire
controller required for getting audio on RB5.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 56 ++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index ce8ae776160d..d2ade3ab3389 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2691,6 +2691,62 @@ 
 	                };
 		};
 
+		wsamacro: codec@3240000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&wsa_swr_active>;
+
+			compatible = "qcom,sm8250-lpass-wsa-macro";
+			reg = <0 0x3240000 0 0x1000>;
+			clocks = <&audiocc LPASS_CDC_WSA_MCLK>,
+				<&audiocc LPASS_CDC_WSA_NPL>,
+				<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&aoncc LPASS_CDC_VA_MCLK>,
+				<&vamacro>;
+
+			clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen";
+
+			#clock-cells = <0>;
+			clock-frequency = <9600000>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+		};
+
+		swr0: soundwire-controller@3250000 {
+			reg = <0 0x3250000 0 0x2000>;
+			compatible = "qcom,soundwire-v1.5.1";
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wsamacro>;
+			clock-names = "iface";
+
+			qcom,din-ports = <2>;
+			qcom,dout-ports = <6>;
+
+			qcom,ports-sinterval-low =	/bits/ 8 <0x07 0x1F 0x3F 0x07 0x1F 0x3F 0x0F 0x0F>;
+			qcom,ports-offset1 = 		/bits/ 8 <0x01 0x02 0x0C 0x06 0x12 0x0D 0x07 0x0A >;
+			qcom,ports-offset2 = 		/bits/ 8 <0xFF 0x00 0x1F 0xFF 0x00 0x1F 0x00 0x00>;
+			qcom,ports-block-pack-mode = 	/bits/ 8 <0x0 0x0 0x1 0x0 0x0 0x1 0x0 0x0>;
+
+			#sound-dai-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		vamacro: codec@3370000 {
+			compatible = "qcom,sm8250-lpass-va-macro";
+			reg = <0 0x3370000 0 0x1000>;
+			clocks = <&aoncc LPASS_CDC_VA_MCLK>,
+				<&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+
+			clock-names = "mclk", "macro", "dcodec";
+
+			#clock-cells = <0>;
+			clock-frequency = <9600000>;
+			clock-output-names = "fsgen";
+			#sound-dai-cells = <1>;
+		};
+
 		adsp: remoteproc@17300000 {
 			compatible = "qcom,sm8250-adsp-pas";
 			reg = <0 0x17300000 0 0x100>;