diff mbox series

[v3,18/25] media: venus: hfi: Add 6xx AXI halt logic

Message ID 20210402100648.1815854-19-bryan.odonoghue@linaro.org
State New
Headers show
Series media: venus: Enable 6xx support | expand

Commit Message

Bryan O'Donoghue April 2, 2021, 10:06 a.m. UTC 
From: Dikshita Agarwal <dikshita@codeaurora.org>


This patch takes the downstream AXI halt routine and applies it when
IS_V6() is true.

bod: Converted to readl_poll_timeout()
     Removed poll timeout for LPI register, testing showed the value
     would always timeout and work, so the polling did nothing of value.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>

Co-developed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>

---
 drivers/media/platform/qcom/venus/hfi_venus.c | 32 +++++++++++++++++++
 1 file changed, 32 insertions(+)

-- 
2.30.1
diff mbox series

Patch

diff --git a/drivers/media/platform/qcom/venus/hfi_venus.c b/drivers/media/platform/qcom/venus/hfi_venus.c
index 24cf20f76e7f..cebb20cf371f 100644
--- a/drivers/media/platform/qcom/venus/hfi_venus.c
+++ b/drivers/media/platform/qcom/venus/hfi_venus.c
@@ -541,10 +541,42 @@  static int venus_halt_axi(struct venus_hfi_device *hdev)
 {
 	void __iomem *wrapper_base = hdev->core->wrapper_base;
 	void __iomem *vbif_base = hdev->core->vbif_base;
+	void __iomem *cpu_cs_base = hdev->core->cpu_cs_base;
+	void __iomem *aon_base = hdev->core->aon_base;
 	struct device *dev = hdev->core->dev;
 	u32 val;
+	u32 mask_val;
 	int ret;
 
+	if (IS_V6(hdev->core)) {
+		writel(0x3, cpu_cs_base + CPU_CS_X2RPMH_V6);
+
+		writel(0x1, aon_base + AON_WRAPPER_MVP_NOC_LPI_CONTROL);
+		ret = readl_poll_timeout(aon_base + AON_WRAPPER_MVP_NOC_LPI_STATUS,
+					 val,
+					 val & BIT(0),
+					 POLL_INTERVAL_US,
+					 VBIF_AXI_HALT_ACK_TIMEOUT_US);
+		if (ret)
+			return -ETIMEDOUT;
+
+		mask_val = (BIT(2) | BIT(1) | BIT(0));
+		writel(mask_val, wrapper_base + WRAPPER_DEBUG_BRIDGE_LPI_CONTROL_V6);
+
+		writel(0x00, wrapper_base + WRAPPER_DEBUG_BRIDGE_LPI_CONTROL_V6);
+		ret = readl_poll_timeout(wrapper_base + WRAPPER_DEBUG_BRIDGE_LPI_STATUS_V6,
+					 val,
+					 val == 0,
+					 POLL_INTERVAL_US,
+					 VBIF_AXI_HALT_ACK_TIMEOUT_US);
+
+		if (ret) {
+			dev_err(dev, "DBLP Release: lpi_status %x\n", val);
+			return -ETIMEDOUT;
+		}
+		return 0;
+	}
+
 	if (IS_V4(hdev->core)) {
 		val = readl(wrapper_base + WRAPPER_CPU_AXI_HALT);
 		val |= WRAPPER_CPU_AXI_HALT_HALT;