[07/11] drm/msm/disp/dpu1: Don't use DSC with mode_3d

We cannot enable mode_3d when we are using the DSC. So pass
configuration to detect DSC is enabled and not enable mode_3d
when we are using DSC

We add a helper dpu_encoder_helper_get_dsc_mode() to detect dsc
enabled and pass this to .setup_intf_cfg()

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h     | 11 +++++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c |  2 ++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c           |  5 +++--
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h           |  2 ++
 4 files changed, 18 insertions(+), 2 deletions(-)

On 2021-07-14 23:51, Vinod Koul wrote:
> We cannot enable mode_3d when we are using the DSC. So pass
> configuration to detect DSC is enabled and not enable mode_3d
> when we are using DSC
> 
> We add a helper dpu_encoder_helper_get_dsc_mode() to detect dsc
> enabled and pass this to .setup_intf_cfg()
> 
This is not entirely correct. This is true only for the 2-2-1 topology 
you are using
on this panel.

When you are using 2-2-1, you are using 2 LMs, 2 DSCs and 1 DSI.
So 3D mux shouldnt be used.

If you are using something like 4-2-1 or 4-2-2, then you have 4LMs,
2 DSCs and 2/1 DSI.

Here you need the 3D mux to convert the data from 4LMs to 2 DSCs.

So please correct the commit text here and also add a check for the 
topology.

> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h     | 11 +++++++++++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c |  2 ++
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c           |  5 +++--
>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h           |  2 ++
>  4 files changed, 18 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> index ecbc4be98980..d43b804528eb 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> @@ -336,6 +336,17 @@ static inline enum dpu_3d_blend_mode
> dpu_encoder_helper_get_3d_blend_mode(
>  	return BLEND_3D_NONE;
>  }
> 
> +static inline bool dpu_encoder_helper_get_dsc_mode(struct
> dpu_encoder_phys *phys_enc)
> +{
> +	struct drm_encoder *drm_enc = phys_enc->parent;
> +	struct msm_drm_private *priv = drm_enc->dev->dev_private;
> +
> +	if (priv->dsc)
> +		return true;
> +
> +	return false;
> +}
Check whether DSC is enabled and only if its 2-2-1 topology.
This needs to be reworked when other topologies are supported.

> +
>  /**
>   * dpu_encoder_helper_split_config - split display configuration
> helper function
>   *	This helper function may be used by physical encoders to configure
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> index b2be39b9144e..5fe87881c30c 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> @@ -69,6 +69,8 @@ static void _dpu_encoder_phys_cmd_update_intf_cfg(
>  	intf_cfg.intf_mode_sel = DPU_CTL_MODE_SEL_CMD;
>  	intf_cfg.stream_sel = cmd_enc->stream_sel;
>  	intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
> +	intf_cfg.dsc = dpu_encoder_helper_get_dsc_mode(phys_enc);
> +
>  	ctl->ops.setup_intf_cfg(ctl, &intf_cfg);
>  }
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index aeea6add61ee..f059416311ee 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -121,7 +121,7 @@ static u32 dpu_hw_ctl_get_pending_flush(struct
> dpu_hw_ctl *ctx)
>  	return ctx->pending_flush_mask;
>  }
> 
> -static inline void dpu_hw_ctl_trigger_flush_v1(struct dpu_hw_ctl *ctx)
> +static void dpu_hw_ctl_trigger_flush_v1(struct dpu_hw_ctl *ctx)
>  {
>  	DPU_REG_WRITE(&ctx->hw, CTL_DSC_FLUSH, BIT(0) | BIT(1) | BIT(2) | 
> BIT(3));
> 
> @@ -522,7 +522,8 @@ static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl 
> *ctx,
> 
>  	intf_cfg |= (cfg->intf & 0xF) << 4;
> 
> -	if (cfg->mode_3d) {
> +	/* In DSC we can't set merge, so check for dsc too */
> +	if (cfg->mode_3d && !cfg->dsc) {
>  		intf_cfg |= BIT(19);
>  		intf_cfg |= (cfg->mode_3d - 0x1) << 20;
>  	}
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> index 806c171e5df2..347a653c1e01 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> @@ -39,6 +39,7 @@ struct dpu_hw_stage_cfg {
>   * @mode_3d:               3d mux configuration
>   * @merge_3d:              3d merge block used
>   * @intf_mode_sel:         Interface mode, cmd / vid
> + * @dsc:                   DSC is enabled
>   * @stream_sel:            Stream selection for multi-stream 
> interfaces
>   */
>  struct dpu_hw_intf_cfg {
> @@ -46,6 +47,7 @@ struct dpu_hw_intf_cfg {
>  	enum dpu_3d_blend_mode mode_3d;
>  	enum dpu_merge_3d merge_3d;
>  	enum dpu_ctl_mode_sel intf_mode_sel;
> +	bool dsc;
>  	int stream_sel;
>  };

On 02-08-21, 17:24, abhinavk@codeaurora.org wrote:
> On 2021-07-14 23:51, Vinod Koul wrote:

> > We cannot enable mode_3d when we are using the DSC. So pass

> > configuration to detect DSC is enabled and not enable mode_3d

> > when we are using DSC

> > 

> > We add a helper dpu_encoder_helper_get_dsc_mode() to detect dsc

> > enabled and pass this to .setup_intf_cfg()

> > 

> This is not entirely correct. This is true only for the 2-2-1 topology you

> are using

> on this panel.

> 

> When you are using 2-2-1, you are using 2 LMs, 2 DSCs and 1 DSI.

> So 3D mux shouldnt be used.

> 

> If you are using something like 4-2-1 or 4-2-2, then you have 4LMs,

> 2 DSCs and 2/1 DSI.

> 

> Here you need the 3D mux to convert the data from 4LMs to 2 DSCs.

> 

> So please correct the commit text here and also add a check for the

> topology.


Ack, we should mention this and modify it in future when more topology
support is added.

-- 
~Vinod