@@ -21,6 +21,20 @@ aliases {
chosen {
stdout-path = "serial0:115200n8";
};
+
+ vreg_wlan: wlan-regulator {
+ compatible = "regulator-fixed";
+
+ regulator-name = "wl-reg";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ gpio = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_regulator_default_state>;
+ };
};
&blsp1_i2c1 {
@@ -206,6 +220,30 @@ &sdhc_1 {
non-removable;
};
+&sdhc_3 {
+ status = "okay";
+
+ max-frequency = <100000000>;
+ non-removable;
+
+ vmmc-supply = <&vreg_wlan>;
+ vqmmc-supply = <&pm8226_l6>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi@1 {
+ compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+
+ interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wake";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_hostwake_default_state>;
+ };
+};
+
&smbb {
qcom,fast-charge-safe-current = <450000>;
qcom,fast-charge-current-limit = <400000>;
@@ -235,6 +273,21 @@ reset {
output-high;
};
};
+
+ wlan_hostwake_default_state: wlan-hostwake-default-state {
+ pins = "gpio37";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
+
+ wlan_regulator_default_state: wlan-regulator-default-state {
+ pins = "gpio46";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
};
&usb {
The device contains BCM43430A0 for wifi. Add a node for it. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> --- arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts | 53 +++++++++++++++++++++ 1 file changed, 53 insertions(+)