diff mbox series

[v3,06/18] ARM: dts: qcom: enable usb phy by default for ipq8064

Message ID 20220309190152.7998-7-ansuelsmth@gmail.com
State Superseded
Headers show
Series Multiple addition to ipq8064 dtsi | expand

Commit Message

Christian Marangi March 9, 2022, 7:01 p.m. UTC 
Enable usb phy by default. When the usb phy were pushed, half of them
were flagged as disabled by mistake. Fix this to correctly init dwc3
node on any ipq8064 based SoC.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 ----
 1 file changed, 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 9d658fcc1f12..e247bf51df01 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -1175,8 +1175,6 @@  hs_phy_0: phy@100f8800 {
 			clocks = <&gcc USB30_0_UTMI_CLK>;
 			clock-names = "ref";
 			#phy-cells = <0>;
-
-			status = "disabled";
 		};
 
 		ss_phy_0: phy@100f8830 {
@@ -1185,8 +1183,6 @@  ss_phy_0: phy@100f8830 {
 			clocks = <&gcc USB30_0_MASTER_CLK>;
 			clock-names = "ref";
 			#phy-cells = <0>;
-
-			status = "disabled";
 		};
 
 		usb3_0: usb3@100f8800 {