diff mbox series

[3/3] arm64: dts: qcom: sc7280-idp: Enable GPI DMAs

Message ID 20220421115526.1828659-3-vkoul@kernel.org
State Accepted
Commit f238ff81e8946540e1a7c1496aa92fa2386893dc
Headers show
Series [1/3] arm64: dts: qcom: sc7280: Add GPI DMAengines | expand

Commit Message

Vinod Koul April 21, 2022, 11:55 a.m. UTC 
Some versions of the firmware for the sc7280-idp  board FIFO mode
disabled and must thus use GPI DMA. Enable gpi_dma0 and gpi_dma1 to
allow this.

Co-developed-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index ecbf2b89d896..00f7ef197be7 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -233,6 +233,14 @@  vreg_bob: bob {
 	};
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
 &ipa {
 	status = "okay";
 	modem-init;