diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index a2d0292a92fd..50c8ee01e0ad 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -99,6 +99,8 @@ enum spmi_regulator_logical_type {
 	SPMI_REGULATOR_LOGICAL_TYPE_ULT_LDO,
 	SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS426,
 	SPMI_REGULATOR_LOGICAL_TYPE_HFS430,
+	SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS3,
+	SPMI_REGULATOR_LOGICAL_TYPE_LDO_510,
 };
 
 enum spmi_regulator_type {
@@ -166,6 +168,16 @@ enum spmi_regulator_subtype {
 	SPMI_REGULATOR_SUBTYPE_HFS430		= 0x0a,
 	SPMI_REGULATOR_SUBTYPE_HT_P150		= 0x35,
 	SPMI_REGULATOR_SUBTYPE_HT_P600		= 0x3d,
+	SPMI_REGULATOR_SUBTYPE_FTSMPS_510	= 0x0b,
+	SPMI_REGULATOR_SUBTYPE_LV_P150_510	= 0x71,
+	SPMI_REGULATOR_SUBTYPE_LV_P300_510	= 0x72,
+	SPMI_REGULATOR_SUBTYPE_LV_P600_510	= 0x73,
+	SPMI_REGULATOR_SUBTYPE_N300_510		= 0x6a,
+	SPMI_REGULATOR_SUBTYPE_N600_510		= 0x6b,
+	SPMI_REGULATOR_SUBTYPE_N1200_510	= 0x6c,
+	SPMI_REGULATOR_SUBTYPE_MV_P50_510	= 0x7a,
+	SPMI_REGULATOR_SUBTYPE_MV_P150_510	= 0x7b,
+	SPMI_REGULATOR_SUBTYPE_MV_P600_510	= 0x7d,
 };
 
 enum spmi_common_regulator_registers {
@@ -193,6 +205,14 @@ enum spmi_ftsmps426_regulator_registers {
 	SPMI_FTSMPS426_REG_VOLTAGE_ULS_MSB	= 0x69,
 };
 
+/*
+ * Third common register layout
+ */
+enum spmi_ftsmps3_regulator_registers {
+	SPMI_FTSMPS3_REG_STEP_CTRL		= 0x3c,
+};
+
+
 enum spmi_vs_registers {
 	SPMI_VS_REG_OCP				= 0x4a,
 	SPMI_VS_REG_SOFT_START			= 0x4c,
@@ -260,6 +280,15 @@ enum spmi_common_control_register_index {
 
 #define SPMI_FTSMPS426_MODE_MASK		0x07
 
+/* Third common regulator mode register values */
+#define SPMI_FTSMPS3_MODE_BYPASS_MASK		2
+#define SPMI_FTSMPS3_MODE_RETENTION_MASK	3
+#define SPMI_FTSMPS3_MODE_LPM_MASK		4
+#define SPMI_FTSMPS3_MODE_AUTO_MASK		6
+#define SPMI_FTSMPS3_MODE_HPM_MASK		7
+
+#define SPMI_FTSMPS3_MODE_MASK			0x07
+
 /* Common regulator pull down control register layout */
 #define SPMI_COMMON_PULL_DOWN_ENABLE_MASK	0x80
 
@@ -305,6 +334,9 @@ enum spmi_common_control_register_index {
 #define SPMI_FTSMPS_STEP_MARGIN_NUM	4
 #define SPMI_FTSMPS_STEP_MARGIN_DEN	5
 
+/* slew_rate has units of uV/us. */
+#define SPMI_FTSMPS3_SLEW_RATE_38p4 38400
+
 #define SPMI_FTSMPS426_STEP_CTRL_DELAY_MASK	0x03
 #define SPMI_FTSMPS426_STEP_CTRL_DELAY_SHIFT	0
 
@@ -554,6 +586,14 @@ static struct spmi_voltage_range ht_p600_ranges[] = {
 	SPMI_VOLTAGE_RANGE(0, 1704000, 1704000, 1896000, 1896000, 8000),
 };
 
+static struct spmi_voltage_range nldo_510_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 320000, 320000, 1304000, 1304000, 8000),
+};
+
+static struct spmi_voltage_range ftsmps510_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 300000, 300000, 1372000, 1372000, 4000),
+};
+
 static DEFINE_SPMI_SET_POINTS(pldo);
 static DEFINE_SPMI_SET_POINTS(nldo1);
 static DEFINE_SPMI_SET_POINTS(nldo2);
@@ -576,6 +616,8 @@ static DEFINE_SPMI_SET_POINTS(ht_nldo);
 static DEFINE_SPMI_SET_POINTS(hfs430);
 static DEFINE_SPMI_SET_POINTS(ht_p150);
 static DEFINE_SPMI_SET_POINTS(ht_p600);
+static DEFINE_SPMI_SET_POINTS(nldo_510);
+static DEFINE_SPMI_SET_POINTS(ftsmps510);
 
 static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf,
 				 int len)
@@ -1062,6 +1104,24 @@ static unsigned int spmi_regulator_ftsmps426_get_mode(struct regulator_dev *rdev
 	}
 }
 
+static int
+spmi_regulator_ftsmps3_get_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 reg;
+
+	spmi_vreg_read(vreg, SPMI_COMMON_REG_MODE, &reg, 1);
+
+	switch (reg) {
+	case SPMI_FTSMPS3_MODE_HPM_MASK:
+		return REGULATOR_MODE_NORMAL;
+	case SPMI_FTSMPS3_MODE_AUTO_MASK:
+		return REGULATOR_MODE_FAST;
+	default:
+		return REGULATOR_MODE_IDLE;
+	}
+}
+
 static int
 spmi_regulator_common_set_mode(struct regulator_dev *rdev, unsigned int mode)
 {
@@ -1108,6 +1168,33 @@ spmi_regulator_ftsmps426_set_mode(struct regulator_dev *rdev, unsigned int mode)
 	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask);
 }
 
+static int
+spmi_regulator_ftsmps3_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct spmi_regulator *vreg = rdev_get_drvdata(rdev);
+	u8 mask = SPMI_FTSMPS3_MODE_MASK;
+	u8 val;
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		val = SPMI_FTSMPS3_MODE_HPM_MASK;
+		break;
+	case REGULATOR_MODE_FAST:
+		val = SPMI_FTSMPS3_MODE_AUTO_MASK;
+		break;
+	case REGULATOR_MODE_IDLE:
+		val = vreg->logical_type ==
+				SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS3 ?
+			SPMI_FTSMPS3_MODE_RETENTION_MASK :
+			SPMI_FTSMPS3_MODE_LPM_MASK;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return spmi_vreg_update_bits(vreg, SPMI_COMMON_REG_MODE, val, mask);
+}
+
 static int
 spmi_regulator_common_set_load(struct regulator_dev *rdev, int load_uA)
 {
@@ -1465,6 +1552,21 @@ static const struct regulator_ops spmi_hfs430_ops = {
 	.get_mode		= spmi_regulator_ftsmps426_get_mode,
 };
 
+static const struct regulator_ops spmi_ftsmps3_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.set_voltage_sel	= spmi_regulator_ftsmps426_set_voltage,
+	.set_voltage_time_sel	= spmi_regulator_set_voltage_time_sel,
+	.get_voltage_sel	= spmi_regulator_ftsmps426_get_voltage,
+	.map_voltage		= spmi_regulator_single_map_voltage,
+	.list_voltage		= spmi_regulator_common_list_voltage,
+	.set_mode		= spmi_regulator_ftsmps3_set_mode,
+	.get_mode		= spmi_regulator_ftsmps3_get_mode,
+	.set_load		= spmi_regulator_common_set_load,
+	.set_pull_down		= spmi_regulator_common_set_pull_down,
+};
+
 /* Maximum possible digital major revision value */
 #define INF 0xFF
 
@@ -1549,6 +1651,16 @@ static const struct spmi_regulator_mapping supported_regulators[] = {
 	SPMI_VREG(ULT_LDO, P300,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
 	SPMI_VREG(ULT_LDO, P150,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 10000),
 	SPMI_VREG(ULT_LDO, P50,     0, INF, ULT_LDO, ult_ldo, ult_pldo, 5000),
+	SPMI_VREG(LDO, LV_P150_510, 0, INF, LDO_510, ftsmps3, ht_lvpldo, 10000),
+	SPMI_VREG(LDO, LV_P300_510, 0, INF, LDO_510, ftsmps3, ht_lvpldo, 10000),
+	SPMI_VREG(LDO, LV_P600_510, 0, INF, LDO_510, ftsmps3, ht_lvpldo, 10000),
+	SPMI_VREG(LDO, MV_P50_510,  0, INF, LDO_510, ftsmps3, pldo660, 10000),
+	SPMI_VREG(LDO, MV_P150_510, 0, INF, LDO_510, ftsmps3, pldo660, 10000),
+	SPMI_VREG(LDO, MV_P600_510, 0, INF, LDO_510, ftsmps3, pldo660, 10000),
+	SPMI_VREG(LDO, N300_510,    0, INF, LDO_510, ftsmps3, nldo_510, 10000),
+	SPMI_VREG(LDO, N600_510,    0, INF, LDO_510, ftsmps3, nldo_510, 10000),
+	SPMI_VREG(LDO, N1200_510,   0, INF, LDO_510, ftsmps3, nldo_510, 10000),
+	SPMI_VREG(FTS, FTSMPS_510,  0, INF, FTSMPS3, ftsmps3, ftsmps510, 100000),
 };
 
 static void spmi_calculate_num_voltages(struct spmi_voltage_set_points *points)
@@ -1696,6 +1808,27 @@ static int spmi_regulator_init_slew_rate_ftsmps426(struct spmi_regulator *vreg,
 	return ret;
 }
 
+static int spmi_regulator_init_slew_rate_ftsmps3(struct spmi_regulator *vreg)
+{
+	int ret;
+	u8 reg = 0;
+	int delay;
+
+	ret = spmi_vreg_read(vreg, SPMI_FTSMPS3_REG_STEP_CTRL, &reg, 1);
+	if (ret) {
+		dev_err(vreg->dev, "spmi read failed, ret=%d\n", ret);
+		return ret;
+	}
+
+	delay = reg & SPMI_FTSMPS426_STEP_CTRL_DELAY_MASK;
+	delay >>= SPMI_FTSMPS426_STEP_CTRL_DELAY_SHIFT;
+
+
+	vreg->slew_rate = SPMI_FTSMPS3_SLEW_RATE_38p4 >> delay;
+
+	return ret;
+}
+
 static int spmi_regulator_init_registers(struct spmi_regulator *vreg,
 				const struct spmi_regulator_init_data *data)
 {
@@ -1846,6 +1979,11 @@ static int spmi_regulator_of_parse(struct device_node *node,
 		if (ret)
 			return ret;
 		break;
+	case SPMI_REGULATOR_LOGICAL_TYPE_FTSMPS3:
+		ret = spmi_regulator_init_slew_rate_ftsmps3(vreg);
+		if (ret)
+			return ret;
+		break;
 	default:
 		break;
 	}
