From patchwork Wed Nov 16 12:30:19 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Abel Vesa X-Patchwork-Id: 625572 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 54316C433FE for ; Wed, 16 Nov 2022 12:31:42 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239004AbiKPMbk (ORCPT ); Wed, 16 Nov 2022 07:31:40 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50082 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S238911AbiKPMbD (ORCPT ); Wed, 16 Nov 2022 07:31:03 -0500 Received: from mail-wr1-x42b.google.com (mail-wr1-x42b.google.com [IPv6:2a00:1450:4864:20::42b]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A5751F59A for ; Wed, 16 Nov 2022 04:30:38 -0800 (PST) Received: by mail-wr1-x42b.google.com with SMTP id a14so29688093wru.5 for ; Wed, 16 Nov 2022 04:30:38 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=giz1O34wJy7wAaesQ+FF9P4d8dC3HL0qQyzf5aCfDtI=; b=f629j43mafTaOsWIuSAx2miVnTB7i3LJ4zxycA8qlKgosC41Di6RVChbXNnhQ6zpLk CkylExavPLU0yzIZi6p9QV5xdTc8x3OBqWRKGM3yXzkvmz/+V+OKPyag10pzQBq7FxQl pzm1+iG7natxVG/vrjkQYvUlt03U8VkrZ7WtjRO8xuwsUHrhQvBwnmEp3Lf3Hqrbz8NH Ie+VikfwnaeJpb/1x89S9pGE4Uo4dFXU8m+V7P36iHWnle2khpHtN4tNROZZasCtyFju NzEpnyavk4UvkFFEuxuQ5XxEZ7/0NbXMrMv4V+j5jqwxq71AQiyuM8ZMuXDkEqLoIMoK ClQw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=giz1O34wJy7wAaesQ+FF9P4d8dC3HL0qQyzf5aCfDtI=; b=brAcEKA5RksHGoSdLzjLl29gJDNxipFiih/l9hEjlILjrPOgCcUw6Yx7/auO8bIYJe oycMW7w5jPqv/aML9nMcpUt674rgDdM1uWZrJ0FDEyKB0MrsbQABZkXHNj7yzfPaj/XJ dBsq/aU3gT9kW4tpAQHbbJ1bIrMRuSBGDMB+rlnpTK8FjYyQwAxxWx1sP7zJNUNrDSiP cWuym1paoUfxzCELyWqRKa1at89mDBkxmVre1HDWAOUGEgy6yIUa4H4bnxhHotgy6B6j fS6F+/0DBKu8bt1RIthSuU/ZVJ+itHNYWwfTFQtOzQxCqsCtFQjsYunnk+YlOhAruPYi 38cw== X-Gm-Message-State: ANoB5pkZ4X2SBHtk0Tyy0CULrRfm7iDj/0MT7/lM+MyYn7qF678zUHMD AiXlae+f0VFdfs3yU9k0FoPajA== X-Google-Smtp-Source: AA0mqf6uMeRIj4E2S0KLJgtKri2ZHqr04fidakEuU8TfyVjypeu/CWYCHR1kRZY8YCx/wmWIwy9yyg== X-Received: by 2002:a05:6000:12cf:b0:236:6e75:dc37 with SMTP id l15-20020a05600012cf00b002366e75dc37mr12858672wrx.504.1668601838129; Wed, 16 Nov 2022 04:30:38 -0800 (PST) Received: from localhost.localdomain ([94.52.112.99]) by smtp.gmail.com with ESMTPSA id l42-20020a05600c1d2a00b003cf4eac8e80sm2870991wms.23.2022.11.16.04.30.36 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 16 Nov 2022 04:30:37 -0800 (PST) From: Abel Vesa To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Greg Kroah-Hartman , Rob Herring , Krzysztof Kozlowski Cc: Linux Kernel Mailing List , devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-scsi@vger.kernel.org, linux-usb@vger.kernel.org Subject: [RFC PATCH 3/3] usb: repeater: Add Qualcomm PMIC eUSB2 driver Date: Wed, 16 Nov 2022 14:30:19 +0200 Message-Id: <20221116123019.2753230-4-abel.vesa@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20221116123019.2753230-1-abel.vesa@linaro.org> References: <20221116123019.2753230-1-abel.vesa@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org PM8550B contains a eUSB2 repeater used for making the eUSB2 from SM8550 USB 2.0 compliant. Add a platform specific repeater driver. It implements ops for init, reset and power on/off. On init, there is a configuration table that needs to be written to the repeater's registers. Signed-off-by: Abel Vesa --- drivers/usb/repeater/Kconfig | 11 + drivers/usb/repeater/Makefile | 1 + .../usb/repeater/repeater-qcom-pmic-eusb2.c | 251 ++++++++++++++++++ 3 files changed, 263 insertions(+) create mode 100644 drivers/usb/repeater/repeater-qcom-pmic-eusb2.c diff --git a/drivers/usb/repeater/Kconfig b/drivers/usb/repeater/Kconfig index e12cd22c0adb..20baeb8f950c 100644 --- a/drivers/usb/repeater/Kconfig +++ b/drivers/usb/repeater/Kconfig @@ -7,3 +7,14 @@ config USB_REPEATER driver to bind together and to provide the USB driver ways to perform set of operations with repeater for USB2 functionality using PHY and controller driver. + +config QCOM_PMIC_EUSB2_REPEATER + tristate "USB eUSB2 Repeater driver" + select USB_REPEATER + help + Enable this to support the USB eUSB2 repeater on Qualcomm PMIC chips. + This driver provides support to reset, initialize, power up and configure + the eUSB2 repeater for USB HS/FS/LS functionality where eUSB2 repeater + is used. + + To compile the driver as a module, choose M here. diff --git a/drivers/usb/repeater/Makefile b/drivers/usb/repeater/Makefile index 2d1b5f348976..fed128407315 100644 --- a/drivers/usb/repeater/Makefile +++ b/drivers/usb/repeater/Makefile @@ -4,3 +4,4 @@ # obj-$(CONFIG_USB_REPEATER) += repeater.o +obj-$(CONFIG_QCOM_PMIC_EUSB2_REPEATER) += repeater-qcom-pmic-eusb2.o diff --git a/drivers/usb/repeater/repeater-qcom-pmic-eusb2.c b/drivers/usb/repeater/repeater-qcom-pmic-eusb2.c new file mode 100644 index 000000000000..1b6d46c28da4 --- /dev/null +++ b/drivers/usb/repeater/repeater-qcom-pmic-eusb2.c @@ -0,0 +1,251 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +#include +#include +#include +#include +#include +#include + +#include + +/* eUSB2 status registers */ +#define EUSB2_RPTR_STATUS 0x08 +#define RPTR_OK BIT(7) + +/* eUSB2 control registers */ +#define EUSB2_EN_CTL1 0x46 +#define EUSB2_RPTR_EN BIT(7) + +#define PHY_HOST_MODE BIT(0) +#define EUSB2_FORCE_EN_5 0xE8 +#define F_CLK_19P2M_EN BIT(6) +#define F_CLK_19P2M_EN_SHIFT 6 + +#define EUSB2_FORCE_VAL_5 0xED +#define V_CLK_19P2M_EN BIT(6) +#define V_CLK_19P2M_EN_SHIFT 6 + +#define EUSB2_TUNE_IUSB2 0x51 +#define EUSB2_TUNE_SQUELCH_U 0x54 +#define EUSB2_TUNE_USB2_PREEM 0x57 + +#define QCOM_EUSB2_REPEATER_INIT_CFG(o, v) \ + { \ + .offset = o, \ + .val = v, \ + } + +#define to_qcom_eusb2_repeater(x) \ + container_of((x), struct qcom_eusb2_repeater, repeater) + +struct qcom_eusb2_repeater_init_tbl { + unsigned int offset; + unsigned int val; +}; + +struct qcom_eusb2_repeater { + struct usb_repeater repeater; + struct regmap *regmap; + u16 base; + struct regulator_bulk_data *vregs; + const struct qcom_eusb2_repeater_cfg *cfg; +}; + +struct qcom_eusb2_repeater_cfg { + const struct qcom_eusb2_repeater_init_tbl *init_tbl; + int init_tbl_num; + /* regulators to be requested */ + const char * const *vreg_list; + int num_vregs; +}; + +static const char * const pm8550b_vreg_l[] = { + "vdd18", "vdd3", +}; + +static const struct qcom_eusb2_repeater_init_tbl pm8550b_init_tbl[] = { + QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_IUSB2, 0x8), + QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_SQUELCH_U, 0x3), + QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_USB2_PREEM, 0x5), +}; + +static const struct qcom_eusb2_repeater_cfg pm8550b_eusb2_cfg = { + .init_tbl = pm8550b_init_tbl, + .init_tbl_num = ARRAY_SIZE(pm8550b_init_tbl), + .vreg_list = pm8550b_vreg_l, + .num_vregs = ARRAY_SIZE(pm8550b_vreg_l), +}; + +static int qcom_eusb2_repeater_init_vregs(struct qcom_eusb2_repeater *rptr) +{ + int num = rptr->cfg->num_vregs; + struct device *dev = rptr->repeater.dev; + int i; + + rptr->vregs = devm_kcalloc(dev, num, sizeof(*rptr->vregs), GFP_KERNEL); + if (!rptr->vregs) + return -ENOMEM; + + for (i = 0; i < num; i++) + rptr->vregs[i].supply = rptr->cfg->vreg_list[i]; + + return devm_regulator_bulk_get(dev, num, rptr->vregs); +} + +static int qcom_eusb2_repeater_cfg_init(struct qcom_eusb2_repeater *rptr) +{ + const struct qcom_eusb2_repeater_init_tbl *init_tbl = rptr->cfg->init_tbl; + int num = rptr->cfg->init_tbl_num; + int i; + + for (i = 0; i < num; i++) + regmap_update_bits(rptr->regmap, rptr->base + init_tbl[i].offset, + init_tbl[i].val, init_tbl[i].val); + return 0; +} + +static int qcom_eusb2_repeater_init(struct usb_repeater *r) +{ + struct qcom_eusb2_repeater *rptr = to_qcom_eusb2_repeater(r); + int ret = 0; + u32 val; + + qcom_eusb2_repeater_cfg_init(rptr); + + if (r->flags & PHY_HOST_MODE) { + /* + * CM.Lx is prohibited when repeater is already into Lx state as + * per eUSB 1.2 Spec. Below implement software workaround until + * PHY and controller is fixing seen observation. + */ + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_EN_5, + F_CLK_19P2M_EN, F_CLK_19P2M_EN); + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_VAL_5, + V_CLK_19P2M_EN, V_CLK_19P2M_EN); + } else { + /* + * In device mode clear host mode related workaround as there + * is no repeater reset available, and enable/disable of + * repeater doesn't clear previous value due to shared + * regulators (say host <-> device mode switch). + */ + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_EN_5, + F_CLK_19P2M_EN, 0); + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_VAL_5, + V_CLK_19P2M_EN, 0); + } + + ret = regmap_read_poll_timeout(rptr->regmap, rptr->base + EUSB2_RPTR_STATUS, val, + val & RPTR_OK, 10, 5); + if (ret) + dev_err(r->dev, "initialization timed-out\n"); + + return ret; +} + +static int qcom_eusb2_repeater_reset(struct usb_repeater *r, bool assert) +{ + struct qcom_eusb2_repeater *rptr = to_qcom_eusb2_repeater(r); + + return regmap_update_bits(rptr->regmap, rptr->base + EUSB2_EN_CTL1, + EUSB2_RPTR_EN, assert ? EUSB2_RPTR_EN : 0x0); +} + +static int qcom_eusb2_repeater_power_on(struct usb_repeater *r) +{ + struct qcom_eusb2_repeater *rptr = to_qcom_eusb2_repeater(r); + + return regulator_bulk_enable(rptr->cfg->num_vregs, rptr->vregs); +} + +static int qcom_eusb2_repeater_power_off(struct usb_repeater *r) +{ + struct qcom_eusb2_repeater *rptr = to_qcom_eusb2_repeater(r); + + return regulator_bulk_disable(rptr->cfg->num_vregs, rptr->vregs); +} + +static int qcom_eusb2_repeater_probe(struct platform_device *pdev) +{ + struct qcom_eusb2_repeater *rptr; + struct device *dev = &pdev->dev; + struct device_node *node; + u32 res; + int ret; + + node = dev->of_node; + + rptr = devm_kzalloc(dev, sizeof(*rptr), GFP_KERNEL); + if (!rptr) + return -ENOMEM; + + rptr->repeater.dev = dev; + dev_set_drvdata(dev, rptr); + + /* Get the specific init parameters of QMP phy */ + rptr->cfg = of_device_get_match_data(dev); + if (!rptr->cfg) + return -EINVAL; + + rptr->regmap = dev_get_regmap(dev->parent, NULL); + if (!rptr->regmap) + return -ENXIO; + + ret = of_property_read_u32(node, "reg", &res); + if (ret < 0) + return ret; + + rptr->base = res; + + ret = qcom_eusb2_repeater_init_vregs(rptr); + if (ret < 0) { + dev_err(dev, "unable to get supplies\n"); + return ret; + } + + rptr->repeater.init = qcom_eusb2_repeater_init; + rptr->repeater.reset = qcom_eusb2_repeater_reset; + rptr->repeater.power_on = qcom_eusb2_repeater_power_on; + rptr->repeater.power_off = qcom_eusb2_repeater_power_off; + + return usb_add_repeater_dev(&rptr->repeater); +} + +static int qcom_eusb2_repeater_remove(struct platform_device *pdev) +{ + struct qcom_eusb2_repeater *rptr = platform_get_drvdata(pdev); + + if (!rptr) + return 0; + + usb_remove_repeater_dev(&rptr->repeater); + qcom_eusb2_repeater_power_off(&rptr->repeater); + return 0; +} + +static const struct of_device_id qcom_eusb2_repeater_id_table[] = { + { + .compatible = "qcom,pm8550b-eusb2-repeater", + .data = &pm8550b_eusb2_cfg, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, qcom_eusb2_repeater_id_table); + +static struct platform_driver qcom_eusb2_repeater_driver = { + .probe = qcom_eusb2_repeater_probe, + .remove = qcom_eusb2_repeater_remove, + .driver = { + .name = "qcom-pmic-eusb2-repeater", + .of_match_table = of_match_ptr(qcom_eusb2_repeater_id_table), + }, +}; + +module_platform_driver(qcom_eusb2_repeater_driver); +MODULE_DESCRIPTION("Qualcomm PMIC eUSB2 repeater driver"); +MODULE_LICENSE("GPL");