@@ -182,7 +182,7 @@ struct qcom_pcie_resources_2_3_3 {
/* 6 clocks typically, 7 for sm8250 */
struct qcom_pcie_resources_2_7_0 {
- struct clk_bulk_data clks[12];
+ struct clk_bulk_data clks[13];
int num_clks;
struct regulator_bulk_data supplies[2];
struct reset_control *pci_reset;
@@ -1208,6 +1208,7 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
res->clks[idx++].id = "noc_aggr_4";
res->clks[idx++].id = "noc_aggr_south_sf";
res->clks[idx++].id = "cnoc_qx";
+ res->clks[idx++].id = "sleep";
num_opt_clks = idx - num_clks;
res->num_clks = idx;
@@ -1824,6 +1825,7 @@ static const struct of_device_id qcom_pcie_match[] = {
{ .compatible = "qcom,pcie-sc8180x", .data = &cfg_1_9_0 },
{ .compatible = "qcom,pcie-sc8280xp", .data = &cfg_1_9_0 },
{ .compatible = "qcom,pcie-sdm845", .data = &cfg_2_7_0 },
+ { .compatible = "qcom,pcie-sdx55", .data = &cfg_1_9_0 },
{ .compatible = "qcom,pcie-sm8150", .data = &cfg_1_9_0 },
{ .compatible = "qcom,pcie-sm8250", .data = &cfg_1_9_0 },
{ .compatible = "qcom,pcie-sm8450-pcie0", .data = &cfg_1_9_0 },
Add support for SDX55 SoC reusing the 1.9.0 config. The PCIe controller is of version 1.10.0 but it is compatible with the 1.9.0 config. This SoC also requires "sleep" clock which is added as an optional clock in the driver, since it is not required on other SoCs. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- drivers/pci/controller/dwc/pcie-qcom.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)