diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index 27d4742cdb19..edfa18190454 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -310,6 +310,90 @@ tlmm: pinctrl@500000 {
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
+			qup_i2c0_default: qup-i2c0-default-state {
+				pins = "gpio0", "gpio1";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c1_default: qup-i2c1-default-state {
+				pins = "gpio4", "gpio5";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c2_default: qup-i2c2-default-state {
+				pins = "gpio6", "gpio7";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c3_default: qup-i2c3-default-state {
+				pins = "gpio8", "gpio9";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c4_default: qup-i2c4-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_i2c5_default: qup-i2c5-default-state {
+				pins = "gpio14", "gpio15";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi0_default: qup-spi0-default-state {
+				pins = "gpio0", "gpio1","gpio2", "gpio3";
+				function = "qup0";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi1_default: qup-spi1-default-state {
+				pins = "gpio4", "gpio5", "gpio69", "gpio70";
+				function = "qup1";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi2_default: qup-spi2-default-state {
+				pins = "gpio6", "gpio7", "gpio71", "gpio80";
+				function = "qup2";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi3_default: qup-spi3-default-state {
+				pins = "gpio8", "gpio9", "gpio10", "gpio11";
+				function = "qup3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi4_default: qup-spi4-default-state {
+				pins = "gpio12", "gpio13", "gpio96", "gpio97";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			qup_spi5_default: qup-spi5-default-state {
+				pins = "gpio14", "gpio15", "gpio16", "gpio17";
+				function = "qup5";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
 			qup_uart0_default: qup-uart0-default-state {
 				pins = "gpio0", "gpio1", "gpio2", "gpio3";
 				function = "qup0";
@@ -317,6 +401,13 @@ qup_uart0_default: qup-uart0-default-state {
 				bias-disable;
 			};
 
+			qup_uart4_default: qup-uart4-default-state {
+				pins = "gpio12", "gpio13";
+				function = "qup4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			sdc1_state_on: sdc1-on-state {
 				clk-pins {
 					pins = "sdc1_clk";
@@ -604,6 +695,38 @@ qupv3_id_0: geniqup@4ac0000 {
 			ranges;
 			status = "disabled";
 
+			i2c0: i2c@4a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c0_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@4a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a80000 0x0 0x4000>;
+				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi0_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			uart0: serial@4a80000 {
 				compatible = "qcom,geni-uart";
 				reg = <0x0 0x04a80000 0x0 0x4000>;
@@ -614,6 +737,177 @@ uart0: serial@4a80000 {
 				pinctrl-names = "default";
 				status = "disabled";
 			};
+
+			i2c1: i2c@4a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c1_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@4a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a84000 0x0 0x4000>;
+				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi1_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@4a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c2_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@4a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a88000 0x0 0x4000>;
+				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi2_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@4a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c3_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@4a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
+				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi3_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@4a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a90000 0x0 0x4000>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c4_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@4a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a90000 0x0 0x4000>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_default>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart4: serial@4a90000 {
+				compatible = "qcom,geni-uart";
+				reg = <0x0 0x04a90000 0x0 0x4000>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_uart4_default>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			i2c5: i2c@4a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0x0 0x04a94000 0x0 0x4000>;
+				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_i2c5_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@4a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0x0 0x04a94000 0x0 0x4000>;
+				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				clock-names = "se";
+				pinctrl-0 = <&qup_spi5_default>;
+				pinctrl-names = "default";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		usb: usb@4ef8800 {
