[v2,3/5] arm64: dts: qcom: Add initial QCM2290 device tree

Add an initial device tree for the QCM2290 low-end SoC, featuring 4
"customized" Cortex-A53 cores and up to 4 GiB of LPDDR(3/4X).

This revision brings support for:
- TSENS & thermal zones
- SDHCI1/2
- I2C, SPI, UART
- MPSS
- ADSP
- Wi-Fi

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/Makefile     |    1 +
 arch/arm64/boot/dts/qcom/qcm2290.dtsi | 1561 +++++++++++++++++++++++++++++++++
 2 files changed, 1562 insertions(+)

On Wed, Apr 05, 2023 at 05:50:32PM +0200, Konrad Dybcio wrote:
> Add an initial device tree for the QCM2290 low-end SoC, featuring 4
> "customized" Cortex-A53 cores and up to 4 GiB of LPDDR(3/4X).
> 
> This revision brings support for:
> - TSENS & thermal zones
> - SDHCI1/2
> - I2C, SPI, UART
> - MPSS
> - ADSP
> - Wi-Fi
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/Makefile     |    1 +
>  arch/arm64/boot/dts/qcom/qcm2290.dtsi | 1561 +++++++++++++++++++++++++++++++++
>  2 files changed, 1562 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 1a29403400b7..6fc8d6664f0c 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -70,6 +70,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-xiaomi-sagit.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= qrb2210-rb1.dtb

I moved this to the patch that actually introduces rb1.dts

Thanks,
Bjorn

>  dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5-vision-mezzanine.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= qru1000-idp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
> new file mode 100644
> index 000000000000..ae5abc76bcc7
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
> @@ -0,0 +1,1561 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (c) 2023, Linaro Ltd
> + *
> + * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain.
> + */
> +
> +#include <dt-bindings/clock/qcom,gcc-qcm2290.h>
> +#include <dt-bindings/clock/qcom,rpmcc.h>
> +#include <dt-bindings/dma/qcom-gpi.h>
> +#include <dt-bindings/firmware/qcom,scm.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +
> +/ {
> +	interrupt-parent = <&intc>;
> +
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	chosen { };
> +
> +	clocks {
> +		xo_board: xo-board {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +		};
> +
> +		sleep_clk: sleep-clk {
> +			compatible = "fixed-clock";
> +			clock-frequency = <32764>;
> +			#clock-cells = <0>;
> +		};
> +	};
> +
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		CPU0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0 0x0>;
> +			clocks = <&cpufreq_hw 0>;
> +			capacity-dmips-mhz = <1024>;
> +			dynamic-power-coefficient = <100>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +			qcom,freq-domain = <&cpufreq_hw 0>;
> +			L2_0: l2-cache {
> +				compatible = "cache";
> +				cache-level = <2>;
> +			};
> +		};
> +
> +		CPU1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0 0x1>;
> +			clocks = <&cpufreq_hw 0>;
> +			capacity-dmips-mhz = <1024>;
> +			dynamic-power-coefficient = <100>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +			qcom,freq-domain = <&cpufreq_hw 0>;
> +		};
> +
> +		CPU2: cpu@2 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0 0x2>;
> +			clocks = <&cpufreq_hw 0>;
> +			capacity-dmips-mhz = <1024>;
> +			dynamic-power-coefficient = <100>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +			qcom,freq-domain = <&cpufreq_hw 0>;
> +		};
> +
> +		CPU3: cpu@3 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0 0x3>;
> +			clocks = <&cpufreq_hw 0>;
> +			capacity-dmips-mhz = <1024>;
> +			dynamic-power-coefficient = <100>;
> +			enable-method = "psci";
> +			next-level-cache = <&L2_0>;
> +			qcom,freq-domain = <&cpufreq_hw 0>;
> +		};
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&CPU0>;
> +				};
> +
> +				core1 {
> +					cpu = <&CPU1>;
> +				};
> +
> +				core2 {
> +					cpu = <&CPU2>;
> +				};
> +
> +				core3 {
> +					cpu = <&CPU3>;
> +				};
> +			};
> +		};
> +	};
> +
> +	firmware {
> +		scm: scm {
> +			compatible = "qcom,scm-qcm2290", "qcom,scm";
> +			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
> +			clock-names = "core";
> +			#reset-cells = <1>;
> +		};
> +	};
> +
> +	memory@40000000 {
> +		device_type = "memory";
> +		/* We expect the bootloader to fill in the size */
> +		reg = <0 0x40000000 0 0>;
> +	};
> +
> +	pmu {
> +		compatible = "arm,armv8-pmuv3";
> +		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	reserved_memory: reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		hyp_mem: hyp@45700000 {
> +			reg = <0x0 0x45700000 0x0 0x600000>;
> +			no-map;
> +		};
> +
> +		xbl_aop_mem: xbl-aop@45e00000 {
> +			reg = <0x0 0x45e00000 0x0 0x140000>;
> +			no-map;
> +		};
> +
> +		sec_apps_mem: sec-apps@45fff000 {
> +			reg = <0x0 0x45fff000 0x0 0x1000>;
> +			no-map;
> +		};
> +
> +		smem_mem: smem@46000000 {
> +			compatible = "qcom,smem";
> +			reg = <0x0 0x46000000 0x0 0x200000>;
> +			no-map;
> +
> +			hwlocks = <&tcsr_mutex 3>;
> +			qcom,rpm-msg-ram = <&rpm_msg_ram>;
> +		};
> +
> +		pil_modem_mem: modem@4ab00000 {
> +			reg = <0x0 0x4ab00000 0x0 0x6900000>;
> +			no-map;
> +		};
> +
> +		pil_video_mem: video@51400000 {
> +			reg = <0x0 0x51400000 0x0 0x500000>;
> +			no-map;
> +		};
> +
> +		wlan_msa_mem: wlan-msa@51900000 {
> +			reg = <0x0 0x51900000 0x0 0x100000>;
> +			no-map;
> +		};
> +
> +		pil_adsp_mem: adsp@51a00000 {
> +			reg = <0x0 0x51a00000 0x0 0x1c00000>;
> +			no-map;
> +		};
> +
> +		pil_ipa_fw_mem: ipa-fw@53600000 {
> +			reg = <0x0 0x53600000 0x0 0x10000>;
> +			no-map;
> +		};
> +
> +		pil_ipa_gsi_mem: ipa-gsi@53610000 {
> +			reg = <0x0 0x53610000 0x0 0x5000>;
> +			no-map;
> +		};
> +
> +		pil_gpu_mem: zap@53615000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0x0 0x53615000 0x0 0x2000>;
> +			no-map;
> +		};
> +
> +		cont_splash_memory: framebuffer@5c000000 {
> +			reg = <0x0 0x5c000000 0x0 0x00f00000>;
> +			no-map;
> +		};
> +
> +		dfps_data_memory: dpfs-data@5cf00000 {
> +			reg = <0x0 0x5cf00000 0x0 0x0100000>;
> +			no-map;
> +		};
> +
> +		removed_mem: reserved@60000000 {
> +			reg = <0x0 0x60000000 0x0 0x3900000>;
> +			no-map;
> +		};
> +
> +		rmtfs_mem: memory@89b01000 {
> +			compatible = "qcom,rmtfs-mem";
> +			reg = <0x0 0x89b01000 0x0 0x200000>;
> +			no-map;
> +
> +			qcom,client-id = <1>;
> +			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>;
> +		};
> +	};
> +
> +	rpm-glink {
> +		compatible = "qcom,glink-rpm";
> +		interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
> +		qcom,rpm-msg-ram = <&rpm_msg_ram>;
> +		mboxes = <&apcs_glb 0>;
> +
> +		rpm_requests: rpm-requests {
> +			compatible = "qcom,rpm-qcm2290";
> +			qcom,glink-channels = "rpm_requests";
> +
> +			rpmcc: clock-controller {
> +				compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc";
> +				clocks = <&xo_board>;
> +				clock-names = "xo";
> +				#clock-cells = <1>;
> +			};
> +
> +			rpmpd: power-controller {
> +				compatible = "qcom,qcm2290-rpmpd";
> +				#power-domain-cells = <1>;
> +				operating-points-v2 = <&rpmpd_opp_table>;
> +
> +				rpmpd_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					rpmpd_opp_min_svs: opp1 {
> +						opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
> +					};
> +
> +					rpmpd_opp_low_svs: opp2 {
> +						opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
> +					};
> +
> +					rpmpd_opp_svs: opp3 {
> +						opp-level = <RPM_SMD_LEVEL_SVS>;
> +					};
> +
> +					rpmpd_opp_svs_plus: opp4 {
> +						opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
> +					};
> +
> +					rpmpd_opp_nom: opp5 {
> +						opp-level = <RPM_SMD_LEVEL_NOM>;
> +					};
> +
> +					rpmpd_opp_nom_plus: opp6 {
> +						opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
> +					};
> +
> +					rpmpd_opp_turbo: opp7 {
> +						opp-level = <RPM_SMD_LEVEL_TURBO>;
> +					};
> +
> +					rpmpd_opp_turbo_plus: opp8 {
> +						opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
> +					};
> +				};
> +			};
> +		};
> +	};
> +
> +	smp2p-adsp {
> +		compatible = "qcom,smp2p";
> +		qcom,smem = <443>, <429>;
> +
> +		interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>;
> +
> +		mboxes = <&apcs_glb 10>;
> +
> +		qcom,local-pid = <0>;
> +		qcom,remote-pid = <2>;
> +
> +		adsp_smp2p_out: master-kernel {
> +			qcom,entry-name = "master-kernel";
> +			#qcom,smem-state-cells = <1>;
> +		};
> +
> +		adsp_smp2p_in: slave-kernel {
> +			qcom,entry-name = "slave-kernel";
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +	};
> +
> +	smp2p-mpss {
> +		compatible = "qcom,smp2p";
> +		qcom,smem = <435>, <428>;
> +
> +		interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
> +
> +		mboxes = <&apcs_glb 14>;
> +
> +		qcom,local-pid = <0>;
> +		qcom,remote-pid = <1>;
> +
> +		modem_smp2p_out: master-kernel {
> +			qcom,entry-name = "master-kernel";
> +			#qcom,smem-state-cells = <1>;
> +		};
> +
> +		modem_smp2p_in: slave-kernel {
> +			qcom,entry-name = "slave-kernel";
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +
> +		wlan_smp2p_in: wlan-wpss-to-ap {
> +			qcom,entry-name = "wlan";
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +	};
> +
> +	soc: soc@0 {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges = <0 0 0 0 0x10 0>;
> +		dma-ranges = <0 0 0 0 0x10 0>;
> +
> +		tcsr_mutex: hwlock@340000 {
> +			compatible = "qcom,tcsr-mutex";
> +			reg = <0x0 0x00340000 0x0 0x20000>;
> +			#hwlock-cells = <1>;
> +		};
> +
> +		tlmm: pinctrl@500000 {
> +			compatible = "qcom,qcm2290-tlmm";
> +			reg = <0x0 0x00500000 0x0 0x300000>;
> +			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			gpio-ranges = <&tlmm 0 0 127>;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +
> +			qup_i2c0_default: qup-i2c0-default-state {
> +				pins = "gpio0", "gpio1";
> +				function = "qup0";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_i2c1_default: qup-i2c1-default-state {
> +				pins = "gpio4", "gpio5";
> +				function = "qup1";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_i2c2_default: qup-i2c2-default-state {
> +				pins = "gpio6", "gpio7";
> +				function = "qup2";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_i2c3_default: qup-i2c3-default-state {
> +				pins = "gpio8", "gpio9";
> +				function = "qup3";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_i2c4_default: qup-i2c4-default-state {
> +				pins = "gpio12", "gpio13";
> +				function = "qup4";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_i2c5_default: qup-i2c5-default-state {
> +				pins = "gpio14", "gpio15";
> +				function = "qup5";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi0_default: qup-spi0-default-state {
> +				pins = "gpio0", "gpio1","gpio2", "gpio3";
> +				function = "qup0";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi1_default: qup-spi1-default-state {
> +				pins = "gpio4", "gpio5", "gpio69", "gpio70";
> +				function = "qup1";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi2_default: qup-spi2-default-state {
> +				pins = "gpio6", "gpio7", "gpio71", "gpio80";
> +				function = "qup2";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi3_default: qup-spi3-default-state {
> +				pins = "gpio8", "gpio9", "gpio10", "gpio11";
> +				function = "qup3";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi4_default: qup-spi4-default-state {
> +				pins = "gpio12", "gpio13", "gpio96", "gpio97";
> +				function = "qup4";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_spi5_default: qup-spi5-default-state {
> +				pins = "gpio14", "gpio15", "gpio16", "gpio17";
> +				function = "qup5";
> +				drive-strength = <2>;
> +				bias-pull-up;
> +			};
> +
> +			qup_uart0_default: qup-uart0-default-state {
> +				pins = "gpio0", "gpio1", "gpio2", "gpio3";
> +				function = "qup0";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			qup_uart4_default: qup-uart4-default-state {
> +				pins = "gpio12", "gpio13";
> +				function = "qup4";
> +				drive-strength = <2>;
> +				bias-disable;
> +			};
> +
> +			sdc1_state_on: sdc1-on-state {
> +				clk-pins {
> +					pins = "sdc1_clk";
> +					drive-strength = <16>;
> +					bias-disable;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc1_cmd";
> +					drive-strength = <10>;
> +					bias-pull-up;
> +				};
> +
> +				data-pins {
> +					pins = "sdc1_data";
> +					drive-strength = <10>;
> +					bias-pull-up;
> +				};
> +
> +				rclk-pins {
> +					pins = "sdc1_rclk";
> +					bias-pull-down;
> +				};
> +			};
> +
> +			sdc1_state_off: sdc1-off-state {
> +				clk-pins {
> +					pins = "sdc1_clk";
> +					drive-strength = <2>;
> +					bias-disable;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc1_cmd";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +
> +				data-pins {
> +					pins = "sdc1_data";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +
> +				rclk-pins {
> +					pins = "sdc1_rclk";
> +					bias-pull-down;
> +				};
> +			};
> +
> +			sdc2_state_on: sdc2-on-state {
> +				clk-pins {
> +					pins = "sdc2_clk";
> +					drive-strength = <16>;
> +					bias-disable;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc2_cmd";
> +					drive-strength = <10>;
> +					bias-pull-up;
> +				};
> +
> +				data-pins {
> +					pins = "sdc2_data";
> +					drive-strength = <10>;
> +					bias-pull-up;
> +				};
> +			};
> +
> +			sdc2_state_off: sdc2-off-state {
> +				clk-pins {
> +					pins = "sdc2_clk";
> +					drive-strength = <2>;
> +					bias-disable;
> +				};
> +
> +				cmd-pins {
> +					pins = "sdc2_cmd";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +
> +				data-pins {
> +					pins = "sdc2_data";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +			};
> +		};
> +
> +		gcc: clock-controller@1400000 {
> +			compatible = "qcom,gcc-qcm2290";
> +			reg = <0x0 0x01400000 0x0 0x1f0000>;
> +			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
> +			clock-names = "bi_tcxo", "sleep_clk";
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +			#power-domain-cells = <1>;
> +		};
> +
> +		usb_hsphy: phy@1613000 {
> +			compatible = "qcom,qcm2290-qusb2-phy";
> +			reg = <0x0 0x01613000 0x0 0x180>;
> +
> +			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
> +				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
> +			clock-names = "cfg_ahb", "ref";
> +
> +			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> +			nvmem-cells = <&qusb2_hstx_trim>;
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
> +		qfprom@1b44000 {
> +			compatible = "qcom,qcm2290-qfprom", "qcom,qfprom";
> +			reg = <0x0 0x01b44000 0x0 0x3000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			qusb2_hstx_trim: hstx-trim@25b {
> +				reg = <0x25b 0x1>;
> +				bits = <1 4>;
> +			};
> +		};
> +
> +		spmi_bus: spmi@1c40000 {
> +			compatible = "qcom,spmi-pmic-arb";
> +			reg = <0x0 0x01c40000 0x0 0x1100>,
> +			      <0x0 0x01e00000 0x0 0x2000000>,
> +			      <0x0 0x03e00000 0x0 0x100000>,
> +			      <0x0 0x03f00000 0x0 0xa0000>,
> +			      <0x0 0x01c0a000 0x0 0x26000>;
> +			reg-names = "core",
> +				    "chnls",
> +				    "obsrvr",
> +				    "intr",
> +				    "cnfg";
> +			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "periph_irq";
> +			qcom,ee = <0>;
> +			qcom,channel = <0>;
> +			#address-cells = <2>;
> +			#size-cells = <0>;
> +			interrupt-controller;
> +			#interrupt-cells = <4>;
> +		};
> +
> +		tsens0: thermal-sensor@4411000 {
> +			compatible = "qcom,qcm2290-tsens", "qcom,tsens-v2";
> +			reg = <0x0 0x04411000 0x0 0x1ff>,
> +			      <0x0 0x04410000 0x0 0x8>;
> +			#qcom,sensors = <10>;
> +			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "uplow", "critical";
> +			#thermal-sensor-cells = <1>;
> +		};
> +
> +		rng: rng@4453000 {
> +			compatible = "qcom,prng-ee";
> +			reg = <0x0 0x04453000 0x0 0x1000>;
> +			clocks = <&rpmcc RPM_SMD_HWKM_CLK>;
> +			clock-names = "core";
> +		};
> +
> +		rpm_msg_ram: sram@45f0000 {
> +			compatible = "qcom,rpm-msg-ram";
> +			reg = <0x0 0x045f0000 0x0 0x7000>;
> +		};
> +
> +		sram@4690000 {
> +			compatible = "qcom,rpm-stats";
> +			reg = <0x0 0x04690000 0x0 0x10000>;
> +		};
> +
> +		sdhc_1: mmc@4744000 {
> +			compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
> +			reg = <0x0 0x04744000 0x0 0x1000>,
> +			      <0x0 0x04745000 0x0 0x1000>,
> +			      <0x0 0x04748000 0x0 0x8000>;
> +			reg-names = "hc",
> +				    "cqhci",
> +				    "ice";
> +
> +			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "hc_irq", "pwr_irq";
> +
> +			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
> +				 <&gcc GCC_SDCC1_APPS_CLK>,
> +				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
> +				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
> +			clock-names = "iface",
> +				      "core",
> +				      "xo",
> +				      "ice";
> +
> +			resets = <&gcc GCC_SDCC1_BCR>;
> +
> +			power-domains = <&rpmpd QCM2290_VDDCX>;
> +			iommus = <&apps_smmu 0xc0 0x0>;
> +
> +			qcom,dll-config = <0x000f642c>;
> +			qcom,ddr-config = <0x80040868>;
> +			bus-width = <8>;
> +
> +			status = "disabled";
> +		};
> +
> +		sdhc_2: mmc@4784000 {
> +			compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
> +			reg = <0x0 0x04784000 0x0 0x1000>;
> +			reg-names = "hc";
> +
> +			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "hc_irq", "pwr_irq";
> +
> +			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> +				 <&gcc GCC_SDCC2_APPS_CLK>,
> +				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
> +			clock-names = "iface",
> +				      "core",
> +				      "xo";
> +
> +			resets = <&gcc GCC_SDCC2_BCR>;
> +
> +			power-domains = <&rpmpd QCM2290_VDDCX>;
> +			operating-points-v2 = <&sdhc2_opp_table>;
> +			iommus = <&apps_smmu 0xa0 0x0>;
> +
> +			qcom,dll-config = <0x0007642c>;
> +			qcom,ddr-config = <0x80040868>;
> +			bus-width = <4>;
> +
> +			status = "disabled";
> +
> +			sdhc2_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-100000000 {
> +					opp-hz = /bits/ 64 <100000000>;
> +					required-opps = <&rpmpd_opp_low_svs>;
> +				};
> +
> +				opp-202000000 {
> +					opp-hz = /bits/ 64 <202000000>;
> +					required-opps = <&rpmpd_opp_svs_plus>;
> +				};
> +			};
> +		};
> +
> +		gpi_dma0: dma-controller@4a00000 {
> +			compatible = "qcom,qcm2290-gpi-dma", "qcom,sm6350-gpi-dma";
> +			reg = <0x0 0x04a00000 0x0 0x60000>;
> +			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
> +			dma-channels =  <10>;
> +			dma-channel-mask = <0x1f>;
> +			iommus = <&apps_smmu 0xf6 0x0>;
> +			#dma-cells = <3>;
> +			status = "disabled";
> +		};
> +
> +		qupv3_id_0: geniqup@4ac0000 {
> +			compatible = "qcom,geni-se-qup";
> +			reg = <0x0 0x04ac0000 0x0 0x2000>;
> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> +				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> +			clock-names = "m-ahb", "s-ahb";
> +			iommus = <&apps_smmu 0xe3 0x0>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +			status = "disabled";
> +
> +			i2c0: i2c@4a80000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x04a80000 0x0 0x4000>;
> +				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> +				clock-names = "se";
> +				pinctrl-0 = <&qup_i2c0_default>;
> +				pinctrl-names = "default";
> +				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
> +				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi0: spi@4a80000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x04a80000 0x0 0x4000>;
> +				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> +				clock-names = "se";
> +				pinctrl-0 = <&qup_spi0_default>;
> +				pinctrl-names = "default";
> +				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
> +				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			uart0: serial@4a80000 {
> +				compatible = "qcom,geni-uart";
> +				reg = <0x0 0x04a80000 0x0 0x4000>;
> +				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> +				clock-names = "se";
> +				pinctrl-0 = <&qup_uart0_default>;
> +				pinctrl-names = "default";
> +				status = "disabled";
> +			};
> +
> +			i2c1: i2c@4a84000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x04a84000 0x0 0x4000>;
> +				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> +				clock-names = "se";
> +				pinctrl-0 = <&qup_i2c1_default>;
> +				pinctrl-names = "default";
> +				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
> +				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi1: spi@4a84000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x04a84000 0x0 0x4000>;
> +				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> +				clock-names = "se";
> +				pinctrl-0 = <&qup_spi1_default>;
> +				pinctrl-names = "default";
> +				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
> +				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c2: i2c@4a88000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x04a88000 0x0 0x4000>;
> +				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> +				clock-names = "se";
> +				pinctrl-0 = <&qup_i2c2_default>;
> +				pinctrl-names = "default";
> +				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
> +				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi2: spi@4a88000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x04a88000 0x0 0x4000>;
> +				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> +				clock-names = "se";
> +				pinctrl-0 = <&qup_spi2_default>;
> +				pinctrl-names = "default";
> +				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
> +				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c3: i2c@4a8c000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x04a8c000 0x0 0x4000>;
> +				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> +				clock-names = "se";
> +				pinctrl-0 = <&qup_i2c3_default>;
> +				pinctrl-names = "default";
> +				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
> +				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi3: spi@4a8c000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x04a8c000 0x0 0x4000>;
> +				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> +				clock-names = "se";
> +				pinctrl-0 = <&qup_spi3_default>;
> +				pinctrl-names = "default";
> +				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
> +				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			i2c4: i2c@4a90000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x04a90000 0x0 0x4000>;
> +				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> +				clock-names = "se";
> +				pinctrl-0 = <&qup_i2c4_default>;
> +				pinctrl-names = "default";
> +				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
> +				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi4: spi@4a90000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x04a90000 0x0 0x4000>;
> +				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_spi4_default>;
> +				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
> +				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			uart4: serial@4a90000 {
> +				compatible = "qcom,geni-uart";
> +				reg = <0x0 0x04a90000 0x0 0x4000>;
> +				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> +				clock-names = "se";
> +				pinctrl-0 = <&qup_uart4_default>;
> +				pinctrl-names = "default";
> +				status = "disabled";
> +			};
> +
> +			i2c5: i2c@4a94000 {
> +				compatible = "qcom,geni-i2c";
> +				reg = <0x0 0x04a94000 0x0 0x4000>;
> +				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> +				clock-names = "se";
> +				pinctrl-0 = <&qup_i2c5_default>;
> +				pinctrl-names = "default";
> +				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
> +				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			spi5: spi@4a94000 {
> +				compatible = "qcom,geni-spi";
> +				reg = <0x0 0x04a94000 0x0 0x4000>;
> +				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> +				clock-names = "se";
> +				pinctrl-0 = <&qup_spi5_default>;
> +				pinctrl-names = "default";
> +				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
> +				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
> +				dma-names = "tx", "rx";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		usb: usb@4ef8800 {
> +			compatible = "qcom,qcm2290-dwc3", "qcom,dwc3";
> +			reg = <0x0 0x04ef8800 0x0 0x400>;
> +			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "hs_phy_irq", "ss_phy_irq";
> +
> +			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
> +				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
> +				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
> +				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
> +				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> +				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
> +			clock-names = "cfg_noc",
> +				      "core",
> +				      "iface",
> +				      "sleep",
> +				      "mock_utmi",
> +				      "xo";
> +
> +			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> +					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
> +			assigned-clock-rates = <19200000>, <133333333>;
> +
> +			resets = <&gcc GCC_USB30_PRIM_BCR>;
> +			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
> +			wakeup-source;
> +
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +
> +			status = "disabled";
> +
> +			usb_dwc3: usb@4e00000 {
> +				compatible = "snps,dwc3";
> +				reg = <0x0 0x04e00000 0x0 0xcd00>;
> +				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
> +				phys = <&usb_hsphy>;
> +				phy-names = "usb2-phy";
> +				iommus = <&apps_smmu 0x120 0x0>;
> +				snps,dis_u2_susphy_quirk;
> +				snps,dis_enblslpm_quirk;
> +				snps,has-lpm-erratum;
> +				snps,hird-threshold = /bits/ 8 <0x10>;
> +				snps,usb3_lpm_capable;
> +				maximum-speed = "super-speed";
> +				dr_mode = "otg";
> +			};
> +		};
> +
> +		remoteproc_mpss: remoteproc@6080000 {
> +			compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas";
> +			reg = <0x0 0x06080000 0x0 0x100>;
> +
> +			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
> +					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
> +					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
> +			interrupt-names = "wdog",
> +					  "fatal",
> +					  "ready",
> +					  "handover",
> +					  "stop-ack",
> +					  "shutdown-ack";
> +
> +			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
> +			clock-names = "xo";
> +
> +			power-domains = <&rpmpd QCM2290_VDDCX>;
> +
> +			memory-region = <&pil_modem_mem>;
> +
> +			qcom,smem-states = <&modem_smp2p_out 0>;
> +			qcom,smem-state-names = "stop";
> +
> +			status = "disabled";
> +
> +			glink-edge {
> +				interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
> +				label = "mpss";
> +				qcom,remote-pid = <1>;
> +				mboxes = <&apcs_glb 12>;
> +			};
> +		};
> +
> +		remoteproc_adsp: remoteproc@ab00000 {
> +			compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas";
> +			reg = <0x0 0x0ab00000 0x0 0x100>;
> +
> +			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
> +					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
> +					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
> +					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
> +					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
> +			interrupt-names = "wdog",
> +					  "fatal",
> +					  "ready",
> +					  "handover",
> +					  "stop-ack";
> +
> +			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
> +			clock-names = "xo";
> +
> +			power-domains = <&rpmpd QCM2290_VDD_LPI_CX>,
> +					<&rpmpd QCM2290_VDD_LPI_MX>;
> +
> +			memory-region = <&pil_adsp_mem>;
> +
> +			qcom,smem-states = <&adsp_smp2p_out 0>;
> +			qcom,smem-state-names = "stop";
> +
> +			status = "disabled";
> +
> +			glink-edge {
> +				interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
> +				label = "lpass";
> +				qcom,remote-pid = <2>;
> +				mboxes = <&apcs_glb 8>;
> +			};
> +		};
> +
> +		apps_smmu: iommu@c600000 {
> +			compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500";
> +			reg = <0x0 0x0c600000 0x0 0x80000>;
> +			#iommu-cells = <2>;
> +			#global-interrupts = <1>;
> +
> +			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
> +		};
> +
> +		wifi: wifi@c800000 {
> +			compatible = "qcom,wcn3990-wifi";
> +			reg = <0x0 0x0c800000 0x0 0x800000>;
> +			reg-names = "membase";
> +			memory-region = <&wlan_msa_mem>;
> +			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
> +			iommus = <&apps_smmu 0x1a0 0x1>;
> +			qcom,msa-fixed-perm;
> +			status = "disabled";
> +		};
> +
> +		watchdog@f017000 {
> +			compatible = "qcom,apss-wdt-qcm2290", "qcom,kpss-wdt";
> +			reg = <0x0 0x0f017000 0x0 0x1000>;
> +			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
> +				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&sleep_clk>;
> +		};
> +
> +		apcs_glb: mailbox@f111000 {
> +			compatible = "qcom,qcm2290-apcs-hmss-global";
> +			reg = <0x0 0x0f111000 0x0 0x1000>;
> +			#mbox-cells = <1>;
> +		};
> +
> +		timer@f120000 {
> +			compatible = "arm,armv7-timer-mem";
> +			reg = <0x0 0x0f120000 0x0 0x1000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges = <0 0x0 0x0f121000 0x8000>;
> +
> +			frame@0 {
> +				reg = <0x0 0x1000>,
> +				      <0x1000 0x1000>;
> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +				frame-number = <0>;
> +			};
> +
> +			frame@2000 {
> +				reg = <0x2000 0x1000>;
> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +				frame-number = <1>;
> +				status = "disabled";
> +			};
> +
> +			frame@3000 {
> +				reg = <0x3000 0x1000>;
> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> +				frame-number = <2>;
> +				status = "disabled";
> +			};
> +
> +			frame@4000 {
> +				reg = <0x4000 0x1000>;
> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +				frame-number = <3>;
> +				status = "disabled";
> +			};
> +
> +			frame@5000 {
> +				reg = <0x5000 0x1000>;
> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> +				frame-number = <4>;
> +				status = "disabled";
> +			};
> +
> +			frame@6000 {
> +				reg = <0x6000 0x1000>;
> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> +				frame-number = <5>;
> +				status = "disabled";
> +			};
> +
> +			frame@7000 {
> +				reg = <0x7000 0x1000>;
> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> +				frame-number = <6>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		intc: interrupt-controller@f200000 {
> +			compatible = "arm,gic-v3";
> +			reg = <0x0 0x0f200000 0x0 0x10000>,
> +			      <0x0 0x0f300000 0x0 0x100000>;
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +			#interrupt-cells = <3>;
> +			interrupt-controller;
> +			interrupt-parent = <&intc>;
> +			#redistributor-regions = <1>;
> +			redistributor-stride = <0x0 0x20000>;
> +		};
> +
> +		cpufreq_hw: cpufreq@f521000 {
> +			compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw";
> +			reg = <0x0 0x0f521000 0x0 0x1000>;
> +			reg-names = "freq-domain0";
> +			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "dcvsh-irq-0";
> +			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
> +			clock-names = "xo", "alternate";
> +
> +			#freq-domain-cells = <1>;
> +			#clock-cells = <1>;
> +		};
> +	};
> +
> +	thermal-zones {
> +		mapss-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +
> +			thermal-sensors = <&tsens0 0>;
> +
> +			trips {
> +				mapss_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				mapss_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				mapss_crit: mapss-crit {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		video-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +
> +			thermal-sensors = <&tsens0 1>;
> +
> +			trips {
> +				video_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				video_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				video_crit: video-crit {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		wlan-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +
> +			thermal-sensors = <&tsens0 2>;
> +
> +			trips {
> +				wlan_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				wlan_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				wlan_crit: wlan-crit {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpuss0-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +
> +			thermal-sensors = <&tsens0 3>;
> +
> +			trips {
> +				cpuss0_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpuss0_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpuss0_crit: cpuss0-crit {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpuss1-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +
> +			thermal-sensors = <&tsens0 4>;
> +
> +			trips {
> +				cpuss1_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpuss1_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpuss1_crit: cpuss1-crit {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		mdm0-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +
> +			thermal-sensors = <&tsens0 5>;
> +
> +			trips {
> +				mdm0_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				mdm0_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				mdm0_crit: mdm0-crit {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		mdm1-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +
> +			thermal-sensors = <&tsens0 6>;
> +
> +			trips {
> +				mdm1_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				mdm1_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				mdm1_crit: mdm1-crit {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		gpu-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +
> +			thermal-sensors = <&tsens0 7>;
> +
> +			trips {
> +				gpu_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				gpu_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				gpu_crit: gpu-crit {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		hm-center-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +
> +			thermal-sensors = <&tsens0 8>;
> +
> +			trips {
> +				hm_center_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				hm_center_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				hm_center_crit: hm-center-crit {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		camera-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +
> +			thermal-sensors = <&tsens0 9>;
> +
> +			trips {
> +				camera_alert0: trip-point0 {
> +					temperature = <90000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				camera_alert1: trip-point1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				camera_crit: camera-crit {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> +	};
> +};
> 
> -- 
> 2.40.0
>

On 7.04.2023 20:35, Bjorn Andersson wrote:
> On Wed, Apr 05, 2023 at 05:50:32PM +0200, Konrad Dybcio wrote:
>> Add an initial device tree for the QCM2290 low-end SoC, featuring 4
>> "customized" Cortex-A53 cores and up to 4 GiB of LPDDR(3/4X).
>>
>> This revision brings support for:
>> - TSENS & thermal zones
>> - SDHCI1/2
>> - I2C, SPI, UART
>> - MPSS
>> - ADSP
>> - Wi-Fi
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>> ---
>>  arch/arm64/boot/dts/qcom/Makefile     |    1 +
>>  arch/arm64/boot/dts/qcom/qcm2290.dtsi | 1561 +++++++++++++++++++++++++++++++++
>>  2 files changed, 1562 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index 1a29403400b7..6fc8d6664f0c 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -70,6 +70,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-xiaomi-sagit.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
>> +dtb-$(CONFIG_ARCH_QCOM)	+= qrb2210-rb1.dtb
> 
> I moved this to the patch that actually introduces rb1.dts
Thanks for spotting this!

Konrad
> 
> Thanks,
> Bjorn
> 
>>  dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5-vision-mezzanine.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= qru1000-idp.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
>> new file mode 100644
>> index 000000000000..ae5abc76bcc7
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
>> @@ -0,0 +1,1561 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>> +/*
>> + * Copyright (c) 2023, Linaro Ltd
>> + *
>> + * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain.
>> + */
>> +
>> +#include <dt-bindings/clock/qcom,gcc-qcm2290.h>
>> +#include <dt-bindings/clock/qcom,rpmcc.h>
>> +#include <dt-bindings/dma/qcom-gpi.h>
>> +#include <dt-bindings/firmware/qcom,scm.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/power/qcom-rpmpd.h>
>> +
>> +/ {
>> +	interrupt-parent = <&intc>;
>> +
>> +	#address-cells = <2>;
>> +	#size-cells = <2>;
>> +
>> +	chosen { };
>> +
>> +	clocks {
>> +		xo_board: xo-board {
>> +			compatible = "fixed-clock";
>> +			#clock-cells = <0>;
>> +		};
>> +
>> +		sleep_clk: sleep-clk {
>> +			compatible = "fixed-clock";
>> +			clock-frequency = <32764>;
>> +			#clock-cells = <0>;
>> +		};
>> +	};
>> +
>> +	cpus {
>> +		#address-cells = <2>;
>> +		#size-cells = <0>;
>> +
>> +		CPU0: cpu@0 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a53";
>> +			reg = <0x0 0x0>;
>> +			clocks = <&cpufreq_hw 0>;
>> +			capacity-dmips-mhz = <1024>;
>> +			dynamic-power-coefficient = <100>;
>> +			enable-method = "psci";
>> +			next-level-cache = <&L2_0>;
>> +			qcom,freq-domain = <&cpufreq_hw 0>;
>> +			L2_0: l2-cache {
>> +				compatible = "cache";
>> +				cache-level = <2>;
>> +			};
>> +		};
>> +
>> +		CPU1: cpu@1 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a53";
>> +			reg = <0x0 0x1>;
>> +			clocks = <&cpufreq_hw 0>;
>> +			capacity-dmips-mhz = <1024>;
>> +			dynamic-power-coefficient = <100>;
>> +			enable-method = "psci";
>> +			next-level-cache = <&L2_0>;
>> +			qcom,freq-domain = <&cpufreq_hw 0>;
>> +		};
>> +
>> +		CPU2: cpu@2 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a53";
>> +			reg = <0x0 0x2>;
>> +			clocks = <&cpufreq_hw 0>;
>> +			capacity-dmips-mhz = <1024>;
>> +			dynamic-power-coefficient = <100>;
>> +			enable-method = "psci";
>> +			next-level-cache = <&L2_0>;
>> +			qcom,freq-domain = <&cpufreq_hw 0>;
>> +		};
>> +
>> +		CPU3: cpu@3 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a53";
>> +			reg = <0x0 0x3>;
>> +			clocks = <&cpufreq_hw 0>;
>> +			capacity-dmips-mhz = <1024>;
>> +			dynamic-power-coefficient = <100>;
>> +			enable-method = "psci";
>> +			next-level-cache = <&L2_0>;
>> +			qcom,freq-domain = <&cpufreq_hw 0>;
>> +		};
>> +
>> +		cpu-map {
>> +			cluster0 {
>> +				core0 {
>> +					cpu = <&CPU0>;
>> +				};
>> +
>> +				core1 {
>> +					cpu = <&CPU1>;
>> +				};
>> +
>> +				core2 {
>> +					cpu = <&CPU2>;
>> +				};
>> +
>> +				core3 {
>> +					cpu = <&CPU3>;
>> +				};
>> +			};
>> +		};
>> +	};
>> +
>> +	firmware {
>> +		scm: scm {
>> +			compatible = "qcom,scm-qcm2290", "qcom,scm";
>> +			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
>> +			clock-names = "core";
>> +			#reset-cells = <1>;
>> +		};
>> +	};
>> +
>> +	memory@40000000 {
>> +		device_type = "memory";
>> +		/* We expect the bootloader to fill in the size */
>> +		reg = <0 0x40000000 0 0>;
>> +	};
>> +
>> +	pmu {
>> +		compatible = "arm,armv8-pmuv3";
>> +		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
>> +	};
>> +
>> +	psci {
>> +		compatible = "arm,psci-1.0";
>> +		method = "smc";
>> +	};
>> +
>> +	reserved_memory: reserved-memory {
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges;
>> +
>> +		hyp_mem: hyp@45700000 {
>> +			reg = <0x0 0x45700000 0x0 0x600000>;
>> +			no-map;
>> +		};
>> +
>> +		xbl_aop_mem: xbl-aop@45e00000 {
>> +			reg = <0x0 0x45e00000 0x0 0x140000>;
>> +			no-map;
>> +		};
>> +
>> +		sec_apps_mem: sec-apps@45fff000 {
>> +			reg = <0x0 0x45fff000 0x0 0x1000>;
>> +			no-map;
>> +		};
>> +
>> +		smem_mem: smem@46000000 {
>> +			compatible = "qcom,smem";
>> +			reg = <0x0 0x46000000 0x0 0x200000>;
>> +			no-map;
>> +
>> +			hwlocks = <&tcsr_mutex 3>;
>> +			qcom,rpm-msg-ram = <&rpm_msg_ram>;
>> +		};
>> +
>> +		pil_modem_mem: modem@4ab00000 {
>> +			reg = <0x0 0x4ab00000 0x0 0x6900000>;
>> +			no-map;
>> +		};
>> +
>> +		pil_video_mem: video@51400000 {
>> +			reg = <0x0 0x51400000 0x0 0x500000>;
>> +			no-map;
>> +		};
>> +
>> +		wlan_msa_mem: wlan-msa@51900000 {
>> +			reg = <0x0 0x51900000 0x0 0x100000>;
>> +			no-map;
>> +		};
>> +
>> +		pil_adsp_mem: adsp@51a00000 {
>> +			reg = <0x0 0x51a00000 0x0 0x1c00000>;
>> +			no-map;
>> +		};
>> +
>> +		pil_ipa_fw_mem: ipa-fw@53600000 {
>> +			reg = <0x0 0x53600000 0x0 0x10000>;
>> +			no-map;
>> +		};
>> +
>> +		pil_ipa_gsi_mem: ipa-gsi@53610000 {
>> +			reg = <0x0 0x53610000 0x0 0x5000>;
>> +			no-map;
>> +		};
>> +
>> +		pil_gpu_mem: zap@53615000 {
>> +			compatible = "shared-dma-pool";
>> +			reg = <0x0 0x53615000 0x0 0x2000>;
>> +			no-map;
>> +		};
>> +
>> +		cont_splash_memory: framebuffer@5c000000 {
>> +			reg = <0x0 0x5c000000 0x0 0x00f00000>;
>> +			no-map;
>> +		};
>> +
>> +		dfps_data_memory: dpfs-data@5cf00000 {
>> +			reg = <0x0 0x5cf00000 0x0 0x0100000>;
>> +			no-map;
>> +		};
>> +
>> +		removed_mem: reserved@60000000 {
>> +			reg = <0x0 0x60000000 0x0 0x3900000>;
>> +			no-map;
>> +		};
>> +
>> +		rmtfs_mem: memory@89b01000 {
>> +			compatible = "qcom,rmtfs-mem";
>> +			reg = <0x0 0x89b01000 0x0 0x200000>;
>> +			no-map;
>> +
>> +			qcom,client-id = <1>;
>> +			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>;
>> +		};
>> +	};
>> +
>> +	rpm-glink {
>> +		compatible = "qcom,glink-rpm";
>> +		interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>;
>> +		qcom,rpm-msg-ram = <&rpm_msg_ram>;
>> +		mboxes = <&apcs_glb 0>;
>> +
>> +		rpm_requests: rpm-requests {
>> +			compatible = "qcom,rpm-qcm2290";
>> +			qcom,glink-channels = "rpm_requests";
>> +
>> +			rpmcc: clock-controller {
>> +				compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc";
>> +				clocks = <&xo_board>;
>> +				clock-names = "xo";
>> +				#clock-cells = <1>;
>> +			};
>> +
>> +			rpmpd: power-controller {
>> +				compatible = "qcom,qcm2290-rpmpd";
>> +				#power-domain-cells = <1>;
>> +				operating-points-v2 = <&rpmpd_opp_table>;
>> +
>> +				rpmpd_opp_table: opp-table {
>> +					compatible = "operating-points-v2";
>> +
>> +					rpmpd_opp_min_svs: opp1 {
>> +						opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
>> +					};
>> +
>> +					rpmpd_opp_low_svs: opp2 {
>> +						opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
>> +					};
>> +
>> +					rpmpd_opp_svs: opp3 {
>> +						opp-level = <RPM_SMD_LEVEL_SVS>;
>> +					};
>> +
>> +					rpmpd_opp_svs_plus: opp4 {
>> +						opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
>> +					};
>> +
>> +					rpmpd_opp_nom: opp5 {
>> +						opp-level = <RPM_SMD_LEVEL_NOM>;
>> +					};
>> +
>> +					rpmpd_opp_nom_plus: opp6 {
>> +						opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
>> +					};
>> +
>> +					rpmpd_opp_turbo: opp7 {
>> +						opp-level = <RPM_SMD_LEVEL_TURBO>;
>> +					};
>> +
>> +					rpmpd_opp_turbo_plus: opp8 {
>> +						opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
>> +					};
>> +				};
>> +			};
>> +		};
>> +	};
>> +
>> +	smp2p-adsp {
>> +		compatible = "qcom,smp2p";
>> +		qcom,smem = <443>, <429>;
>> +
>> +		interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>;
>> +
>> +		mboxes = <&apcs_glb 10>;
>> +
>> +		qcom,local-pid = <0>;
>> +		qcom,remote-pid = <2>;
>> +
>> +		adsp_smp2p_out: master-kernel {
>> +			qcom,entry-name = "master-kernel";
>> +			#qcom,smem-state-cells = <1>;
>> +		};
>> +
>> +		adsp_smp2p_in: slave-kernel {
>> +			qcom,entry-name = "slave-kernel";
>> +			interrupt-controller;
>> +			#interrupt-cells = <2>;
>> +		};
>> +	};
>> +
>> +	smp2p-mpss {
>> +		compatible = "qcom,smp2p";
>> +		qcom,smem = <435>, <428>;
>> +
>> +		interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
>> +
>> +		mboxes = <&apcs_glb 14>;
>> +
>> +		qcom,local-pid = <0>;
>> +		qcom,remote-pid = <1>;
>> +
>> +		modem_smp2p_out: master-kernel {
>> +			qcom,entry-name = "master-kernel";
>> +			#qcom,smem-state-cells = <1>;
>> +		};
>> +
>> +		modem_smp2p_in: slave-kernel {
>> +			qcom,entry-name = "slave-kernel";
>> +			interrupt-controller;
>> +			#interrupt-cells = <2>;
>> +		};
>> +
>> +		wlan_smp2p_in: wlan-wpss-to-ap {
>> +			qcom,entry-name = "wlan";
>> +			interrupt-controller;
>> +			#interrupt-cells = <2>;
>> +		};
>> +	};
>> +
>> +	soc: soc@0 {
>> +		compatible = "simple-bus";
>> +		#address-cells = <2>;
>> +		#size-cells = <2>;
>> +		ranges = <0 0 0 0 0x10 0>;
>> +		dma-ranges = <0 0 0 0 0x10 0>;
>> +
>> +		tcsr_mutex: hwlock@340000 {
>> +			compatible = "qcom,tcsr-mutex";
>> +			reg = <0x0 0x00340000 0x0 0x20000>;
>> +			#hwlock-cells = <1>;
>> +		};
>> +
>> +		tlmm: pinctrl@500000 {
>> +			compatible = "qcom,qcm2290-tlmm";
>> +			reg = <0x0 0x00500000 0x0 0x300000>;
>> +			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
>> +			gpio-controller;
>> +			gpio-ranges = <&tlmm 0 0 127>;
>> +			#gpio-cells = <2>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <2>;
>> +
>> +			qup_i2c0_default: qup-i2c0-default-state {
>> +				pins = "gpio0", "gpio1";
>> +				function = "qup0";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_i2c1_default: qup-i2c1-default-state {
>> +				pins = "gpio4", "gpio5";
>> +				function = "qup1";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_i2c2_default: qup-i2c2-default-state {
>> +				pins = "gpio6", "gpio7";
>> +				function = "qup2";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_i2c3_default: qup-i2c3-default-state {
>> +				pins = "gpio8", "gpio9";
>> +				function = "qup3";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_i2c4_default: qup-i2c4-default-state {
>> +				pins = "gpio12", "gpio13";
>> +				function = "qup4";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_i2c5_default: qup-i2c5-default-state {
>> +				pins = "gpio14", "gpio15";
>> +				function = "qup5";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi0_default: qup-spi0-default-state {
>> +				pins = "gpio0", "gpio1","gpio2", "gpio3";
>> +				function = "qup0";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi1_default: qup-spi1-default-state {
>> +				pins = "gpio4", "gpio5", "gpio69", "gpio70";
>> +				function = "qup1";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi2_default: qup-spi2-default-state {
>> +				pins = "gpio6", "gpio7", "gpio71", "gpio80";
>> +				function = "qup2";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi3_default: qup-spi3-default-state {
>> +				pins = "gpio8", "gpio9", "gpio10", "gpio11";
>> +				function = "qup3";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi4_default: qup-spi4-default-state {
>> +				pins = "gpio12", "gpio13", "gpio96", "gpio97";
>> +				function = "qup4";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_spi5_default: qup-spi5-default-state {
>> +				pins = "gpio14", "gpio15", "gpio16", "gpio17";
>> +				function = "qup5";
>> +				drive-strength = <2>;
>> +				bias-pull-up;
>> +			};
>> +
>> +			qup_uart0_default: qup-uart0-default-state {
>> +				pins = "gpio0", "gpio1", "gpio2", "gpio3";
>> +				function = "qup0";
>> +				drive-strength = <2>;
>> +				bias-disable;
>> +			};
>> +
>> +			qup_uart4_default: qup-uart4-default-state {
>> +				pins = "gpio12", "gpio13";
>> +				function = "qup4";
>> +				drive-strength = <2>;
>> +				bias-disable;
>> +			};
>> +
>> +			sdc1_state_on: sdc1-on-state {
>> +				clk-pins {
>> +					pins = "sdc1_clk";
>> +					drive-strength = <16>;
>> +					bias-disable;
>> +				};
>> +
>> +				cmd-pins {
>> +					pins = "sdc1_cmd";
>> +					drive-strength = <10>;
>> +					bias-pull-up;
>> +				};
>> +
>> +				data-pins {
>> +					pins = "sdc1_data";
>> +					drive-strength = <10>;
>> +					bias-pull-up;
>> +				};
>> +
>> +				rclk-pins {
>> +					pins = "sdc1_rclk";
>> +					bias-pull-down;
>> +				};
>> +			};
>> +
>> +			sdc1_state_off: sdc1-off-state {
>> +				clk-pins {
>> +					pins = "sdc1_clk";
>> +					drive-strength = <2>;
>> +					bias-disable;
>> +				};
>> +
>> +				cmd-pins {
>> +					pins = "sdc1_cmd";
>> +					drive-strength = <2>;
>> +					bias-pull-up;
>> +				};
>> +
>> +				data-pins {
>> +					pins = "sdc1_data";
>> +					drive-strength = <2>;
>> +					bias-pull-up;
>> +				};
>> +
>> +				rclk-pins {
>> +					pins = "sdc1_rclk";
>> +					bias-pull-down;
>> +				};
>> +			};
>> +
>> +			sdc2_state_on: sdc2-on-state {
>> +				clk-pins {
>> +					pins = "sdc2_clk";
>> +					drive-strength = <16>;
>> +					bias-disable;
>> +				};
>> +
>> +				cmd-pins {
>> +					pins = "sdc2_cmd";
>> +					drive-strength = <10>;
>> +					bias-pull-up;
>> +				};
>> +
>> +				data-pins {
>> +					pins = "sdc2_data";
>> +					drive-strength = <10>;
>> +					bias-pull-up;
>> +				};
>> +			};
>> +
>> +			sdc2_state_off: sdc2-off-state {
>> +				clk-pins {
>> +					pins = "sdc2_clk";
>> +					drive-strength = <2>;
>> +					bias-disable;
>> +				};
>> +
>> +				cmd-pins {
>> +					pins = "sdc2_cmd";
>> +					drive-strength = <2>;
>> +					bias-pull-up;
>> +				};
>> +
>> +				data-pins {
>> +					pins = "sdc2_data";
>> +					drive-strength = <2>;
>> +					bias-pull-up;
>> +				};
>> +			};
>> +		};
>> +
>> +		gcc: clock-controller@1400000 {
>> +			compatible = "qcom,gcc-qcm2290";
>> +			reg = <0x0 0x01400000 0x0 0x1f0000>;
>> +			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
>> +			clock-names = "bi_tcxo", "sleep_clk";
>> +			#clock-cells = <1>;
>> +			#reset-cells = <1>;
>> +			#power-domain-cells = <1>;
>> +		};
>> +
>> +		usb_hsphy: phy@1613000 {
>> +			compatible = "qcom,qcm2290-qusb2-phy";
>> +			reg = <0x0 0x01613000 0x0 0x180>;
>> +
>> +			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
>> +				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
>> +			clock-names = "cfg_ahb", "ref";
>> +
>> +			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
>> +			nvmem-cells = <&qusb2_hstx_trim>;
>> +			#phy-cells = <0>;
>> +
>> +			status = "disabled";
>> +		};
>> +
>> +		qfprom@1b44000 {
>> +			compatible = "qcom,qcm2290-qfprom", "qcom,qfprom";
>> +			reg = <0x0 0x01b44000 0x0 0x3000>;
>> +			#address-cells = <1>;
>> +			#size-cells = <1>;
>> +
>> +			qusb2_hstx_trim: hstx-trim@25b {
>> +				reg = <0x25b 0x1>;
>> +				bits = <1 4>;
>> +			};
>> +		};
>> +
>> +		spmi_bus: spmi@1c40000 {
>> +			compatible = "qcom,spmi-pmic-arb";
>> +			reg = <0x0 0x01c40000 0x0 0x1100>,
>> +			      <0x0 0x01e00000 0x0 0x2000000>,
>> +			      <0x0 0x03e00000 0x0 0x100000>,
>> +			      <0x0 0x03f00000 0x0 0xa0000>,
>> +			      <0x0 0x01c0a000 0x0 0x26000>;
>> +			reg-names = "core",
>> +				    "chnls",
>> +				    "obsrvr",
>> +				    "intr",
>> +				    "cnfg";
>> +			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupt-names = "periph_irq";
>> +			qcom,ee = <0>;
>> +			qcom,channel = <0>;
>> +			#address-cells = <2>;
>> +			#size-cells = <0>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <4>;
>> +		};
>> +
>> +		tsens0: thermal-sensor@4411000 {
>> +			compatible = "qcom,qcm2290-tsens", "qcom,tsens-v2";
>> +			reg = <0x0 0x04411000 0x0 0x1ff>,
>> +			      <0x0 0x04410000 0x0 0x8>;
>> +			#qcom,sensors = <10>;
>> +			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupt-names = "uplow", "critical";
>> +			#thermal-sensor-cells = <1>;
>> +		};
>> +
>> +		rng: rng@4453000 {
>> +			compatible = "qcom,prng-ee";
>> +			reg = <0x0 0x04453000 0x0 0x1000>;
>> +			clocks = <&rpmcc RPM_SMD_HWKM_CLK>;
>> +			clock-names = "core";
>> +		};
>> +
>> +		rpm_msg_ram: sram@45f0000 {
>> +			compatible = "qcom,rpm-msg-ram";
>> +			reg = <0x0 0x045f0000 0x0 0x7000>;
>> +		};
>> +
>> +		sram@4690000 {
>> +			compatible = "qcom,rpm-stats";
>> +			reg = <0x0 0x04690000 0x0 0x10000>;
>> +		};
>> +
>> +		sdhc_1: mmc@4744000 {
>> +			compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
>> +			reg = <0x0 0x04744000 0x0 0x1000>,
>> +			      <0x0 0x04745000 0x0 0x1000>,
>> +			      <0x0 0x04748000 0x0 0x8000>;
>> +			reg-names = "hc",
>> +				    "cqhci",
>> +				    "ice";
>> +
>> +			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupt-names = "hc_irq", "pwr_irq";
>> +
>> +			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
>> +				 <&gcc GCC_SDCC1_APPS_CLK>,
>> +				 <&rpmcc RPM_SMD_XO_CLK_SRC>,
>> +				 <&gcc GCC_SDCC1_ICE_CORE_CLK>;
>> +			clock-names = "iface",
>> +				      "core",
>> +				      "xo",
>> +				      "ice";
>> +
>> +			resets = <&gcc GCC_SDCC1_BCR>;
>> +
>> +			power-domains = <&rpmpd QCM2290_VDDCX>;
>> +			iommus = <&apps_smmu 0xc0 0x0>;
>> +
>> +			qcom,dll-config = <0x000f642c>;
>> +			qcom,ddr-config = <0x80040868>;
>> +			bus-width = <8>;
>> +
>> +			status = "disabled";
>> +		};
>> +
>> +		sdhc_2: mmc@4784000 {
>> +			compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5";
>> +			reg = <0x0 0x04784000 0x0 0x1000>;
>> +			reg-names = "hc";
>> +
>> +			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupt-names = "hc_irq", "pwr_irq";
>> +
>> +			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
>> +				 <&gcc GCC_SDCC2_APPS_CLK>,
>> +				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
>> +			clock-names = "iface",
>> +				      "core",
>> +				      "xo";
>> +
>> +			resets = <&gcc GCC_SDCC2_BCR>;
>> +
>> +			power-domains = <&rpmpd QCM2290_VDDCX>;
>> +			operating-points-v2 = <&sdhc2_opp_table>;
>> +			iommus = <&apps_smmu 0xa0 0x0>;
>> +
>> +			qcom,dll-config = <0x0007642c>;
>> +			qcom,ddr-config = <0x80040868>;
>> +			bus-width = <4>;
>> +
>> +			status = "disabled";
>> +
>> +			sdhc2_opp_table: opp-table {
>> +				compatible = "operating-points-v2";
>> +
>> +				opp-100000000 {
>> +					opp-hz = /bits/ 64 <100000000>;
>> +					required-opps = <&rpmpd_opp_low_svs>;
>> +				};
>> +
>> +				opp-202000000 {
>> +					opp-hz = /bits/ 64 <202000000>;
>> +					required-opps = <&rpmpd_opp_svs_plus>;
>> +				};
>> +			};
>> +		};
>> +
>> +		gpi_dma0: dma-controller@4a00000 {
>> +			compatible = "qcom,qcm2290-gpi-dma", "qcom,sm6350-gpi-dma";
>> +			reg = <0x0 0x04a00000 0x0 0x60000>;
>> +			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
>> +			dma-channels =  <10>;
>> +			dma-channel-mask = <0x1f>;
>> +			iommus = <&apps_smmu 0xf6 0x0>;
>> +			#dma-cells = <3>;
>> +			status = "disabled";
>> +		};
>> +
>> +		qupv3_id_0: geniqup@4ac0000 {
>> +			compatible = "qcom,geni-se-qup";
>> +			reg = <0x0 0x04ac0000 0x0 0x2000>;
>> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
>> +				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
>> +			clock-names = "m-ahb", "s-ahb";
>> +			iommus = <&apps_smmu 0xe3 0x0>;
>> +			#address-cells = <2>;
>> +			#size-cells = <2>;
>> +			ranges;
>> +			status = "disabled";
>> +
>> +			i2c0: i2c@4a80000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x04a80000 0x0 0x4000>;
>> +				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
>> +				clock-names = "se";
>> +				pinctrl-0 = <&qup_i2c0_default>;
>> +				pinctrl-names = "default";
>> +				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
>> +				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi0: spi@4a80000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x04a80000 0x0 0x4000>;
>> +				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
>> +				clock-names = "se";
>> +				pinctrl-0 = <&qup_spi0_default>;
>> +				pinctrl-names = "default";
>> +				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
>> +				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			uart0: serial@4a80000 {
>> +				compatible = "qcom,geni-uart";
>> +				reg = <0x0 0x04a80000 0x0 0x4000>;
>> +				interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
>> +				clock-names = "se";
>> +				pinctrl-0 = <&qup_uart0_default>;
>> +				pinctrl-names = "default";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c1: i2c@4a84000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x04a84000 0x0 0x4000>;
>> +				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>> +				clock-names = "se";
>> +				pinctrl-0 = <&qup_i2c1_default>;
>> +				pinctrl-names = "default";
>> +				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
>> +				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi1: spi@4a84000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x04a84000 0x0 0x4000>;
>> +				interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
>> +				clock-names = "se";
>> +				pinctrl-0 = <&qup_spi1_default>;
>> +				pinctrl-names = "default";
>> +				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
>> +				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c2: i2c@4a88000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x04a88000 0x0 0x4000>;
>> +				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>> +				clock-names = "se";
>> +				pinctrl-0 = <&qup_i2c2_default>;
>> +				pinctrl-names = "default";
>> +				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
>> +				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi2: spi@4a88000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x04a88000 0x0 0x4000>;
>> +				interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
>> +				clock-names = "se";
>> +				pinctrl-0 = <&qup_spi2_default>;
>> +				pinctrl-names = "default";
>> +				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
>> +				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c3: i2c@4a8c000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x04a8c000 0x0 0x4000>;
>> +				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>> +				clock-names = "se";
>> +				pinctrl-0 = <&qup_i2c3_default>;
>> +				pinctrl-names = "default";
>> +				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
>> +				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi3: spi@4a8c000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x04a8c000 0x0 0x4000>;
>> +				interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
>> +				clock-names = "se";
>> +				pinctrl-0 = <&qup_spi3_default>;
>> +				pinctrl-names = "default";
>> +				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
>> +				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c4: i2c@4a90000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x04a90000 0x0 0x4000>;
>> +				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>> +				clock-names = "se";
>> +				pinctrl-0 = <&qup_i2c4_default>;
>> +				pinctrl-names = "default";
>> +				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
>> +				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi4: spi@4a90000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x04a90000 0x0 0x4000>;
>> +				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
>> +				clock-names = "se";
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&qup_spi4_default>;
>> +				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
>> +				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			uart4: serial@4a90000 {
>> +				compatible = "qcom,geni-uart";
>> +				reg = <0x0 0x04a90000 0x0 0x4000>;
>> +				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
>> +				clock-names = "se";
>> +				pinctrl-0 = <&qup_uart4_default>;
>> +				pinctrl-names = "default";
>> +				status = "disabled";
>> +			};
>> +
>> +			i2c5: i2c@4a94000 {
>> +				compatible = "qcom,geni-i2c";
>> +				reg = <0x0 0x04a94000 0x0 0x4000>;
>> +				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>> +				clock-names = "se";
>> +				pinctrl-0 = <&qup_i2c5_default>;
>> +				pinctrl-names = "default";
>> +				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
>> +				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +
>> +			spi5: spi@4a94000 {
>> +				compatible = "qcom,geni-spi";
>> +				reg = <0x0 0x04a94000 0x0 0x4000>;
>> +				interrupts = <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
>> +				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
>> +				clock-names = "se";
>> +				pinctrl-0 = <&qup_spi5_default>;
>> +				pinctrl-names = "default";
>> +				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
>> +				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
>> +				dma-names = "tx", "rx";
>> +				#address-cells = <1>;
>> +				#size-cells = <0>;
>> +				status = "disabled";
>> +			};
>> +		};
>> +
>> +		usb: usb@4ef8800 {
>> +			compatible = "qcom,qcm2290-dwc3", "qcom,dwc3";
>> +			reg = <0x0 0x04ef8800 0x0 0x400>;
>> +			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupt-names = "hs_phy_irq", "ss_phy_irq";
>> +
>> +			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
>> +				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
>> +				 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
>> +				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
>> +				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
>> +				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
>> +			clock-names = "cfg_noc",
>> +				      "core",
>> +				      "iface",
>> +				      "sleep",
>> +				      "mock_utmi",
>> +				      "xo";
>> +
>> +			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
>> +					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
>> +			assigned-clock-rates = <19200000>, <133333333>;
>> +
>> +			resets = <&gcc GCC_USB30_PRIM_BCR>;
>> +			power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
>> +			wakeup-source;
>> +
>> +			#address-cells = <2>;
>> +			#size-cells = <2>;
>> +			ranges;
>> +
>> +			status = "disabled";
>> +
>> +			usb_dwc3: usb@4e00000 {
>> +				compatible = "snps,dwc3";
>> +				reg = <0x0 0x04e00000 0x0 0xcd00>;
>> +				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
>> +				phys = <&usb_hsphy>;
>> +				phy-names = "usb2-phy";
>> +				iommus = <&apps_smmu 0x120 0x0>;
>> +				snps,dis_u2_susphy_quirk;
>> +				snps,dis_enblslpm_quirk;
>> +				snps,has-lpm-erratum;
>> +				snps,hird-threshold = /bits/ 8 <0x10>;
>> +				snps,usb3_lpm_capable;
>> +				maximum-speed = "super-speed";
>> +				dr_mode = "otg";
>> +			};
>> +		};
>> +
>> +		remoteproc_mpss: remoteproc@6080000 {
>> +			compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas";
>> +			reg = <0x0 0x06080000 0x0 0x100>;
>> +
>> +			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
>> +					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
>> +					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
>> +					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
>> +					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
>> +					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
>> +			interrupt-names = "wdog",
>> +					  "fatal",
>> +					  "ready",
>> +					  "handover",
>> +					  "stop-ack",
>> +					  "shutdown-ack";
>> +
>> +			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
>> +			clock-names = "xo";
>> +
>> +			power-domains = <&rpmpd QCM2290_VDDCX>;
>> +
>> +			memory-region = <&pil_modem_mem>;
>> +
>> +			qcom,smem-states = <&modem_smp2p_out 0>;
>> +			qcom,smem-state-names = "stop";
>> +
>> +			status = "disabled";
>> +
>> +			glink-edge {
>> +				interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
>> +				label = "mpss";
>> +				qcom,remote-pid = <1>;
>> +				mboxes = <&apcs_glb 12>;
>> +			};
>> +		};
>> +
>> +		remoteproc_adsp: remoteproc@ab00000 {
>> +			compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas";
>> +			reg = <0x0 0x0ab00000 0x0 0x100>;
>> +
>> +			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
>> +					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
>> +					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
>> +					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
>> +					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
>> +			interrupt-names = "wdog",
>> +					  "fatal",
>> +					  "ready",
>> +					  "handover",
>> +					  "stop-ack";
>> +
>> +			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
>> +			clock-names = "xo";
>> +
>> +			power-domains = <&rpmpd QCM2290_VDD_LPI_CX>,
>> +					<&rpmpd QCM2290_VDD_LPI_MX>;
>> +
>> +			memory-region = <&pil_adsp_mem>;
>> +
>> +			qcom,smem-states = <&adsp_smp2p_out 0>;
>> +			qcom,smem-state-names = "stop";
>> +
>> +			status = "disabled";
>> +
>> +			glink-edge {
>> +				interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
>> +				label = "lpass";
>> +				qcom,remote-pid = <2>;
>> +				mboxes = <&apcs_glb 8>;
>> +			};
>> +		};
>> +
>> +		apps_smmu: iommu@c600000 {
>> +			compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500";
>> +			reg = <0x0 0x0c600000 0x0 0x80000>;
>> +			#iommu-cells = <2>;
>> +			#global-interrupts = <1>;
>> +
>> +			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
>> +		};
>> +
>> +		wifi: wifi@c800000 {
>> +			compatible = "qcom,wcn3990-wifi";
>> +			reg = <0x0 0x0c800000 0x0 0x800000>;
>> +			reg-names = "membase";
>> +			memory-region = <&wlan_msa_mem>;
>> +			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
>> +				     <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
>> +			iommus = <&apps_smmu 0x1a0 0x1>;
>> +			qcom,msa-fixed-perm;
>> +			status = "disabled";
>> +		};
>> +
>> +		watchdog@f017000 {
>> +			compatible = "qcom,apss-wdt-qcm2290", "qcom,kpss-wdt";
>> +			reg = <0x0 0x0f017000 0x0 0x1000>;
>> +			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>,
>> +				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&sleep_clk>;
>> +		};
>> +
>> +		apcs_glb: mailbox@f111000 {
>> +			compatible = "qcom,qcm2290-apcs-hmss-global";
>> +			reg = <0x0 0x0f111000 0x0 0x1000>;
>> +			#mbox-cells = <1>;
>> +		};
>> +
>> +		timer@f120000 {
>> +			compatible = "arm,armv7-timer-mem";
>> +			reg = <0x0 0x0f120000 0x0 0x1000>;
>> +			#address-cells = <1>;
>> +			#size-cells = <1>;
>> +			ranges = <0 0x0 0x0f121000 0x8000>;
>> +
>> +			frame@0 {
>> +				reg = <0x0 0x1000>,
>> +				      <0x1000 0x1000>;
>> +				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
>> +					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> +				frame-number = <0>;
>> +			};
>> +
>> +			frame@2000 {
>> +				reg = <0x2000 0x1000>;
>> +				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> +				frame-number = <1>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@3000 {
>> +				reg = <0x3000 0x1000>;
>> +				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
>> +				frame-number = <2>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@4000 {
>> +				reg = <0x4000 0x1000>;
>> +				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
>> +				frame-number = <3>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@5000 {
>> +				reg = <0x5000 0x1000>;
>> +				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
>> +				frame-number = <4>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@6000 {
>> +				reg = <0x6000 0x1000>;
>> +				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>> +				frame-number = <5>;
>> +				status = "disabled";
>> +			};
>> +
>> +			frame@7000 {
>> +				reg = <0x7000 0x1000>;
>> +				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>> +				frame-number = <6>;
>> +				status = "disabled";
>> +			};
>> +		};
>> +
>> +		intc: interrupt-controller@f200000 {
>> +			compatible = "arm,gic-v3";
>> +			reg = <0x0 0x0f200000 0x0 0x10000>,
>> +			      <0x0 0x0f300000 0x0 0x100000>;
>> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
>> +			#interrupt-cells = <3>;
>> +			interrupt-controller;
>> +			interrupt-parent = <&intc>;
>> +			#redistributor-regions = <1>;
>> +			redistributor-stride = <0x0 0x20000>;
>> +		};
>> +
>> +		cpufreq_hw: cpufreq@f521000 {
>> +			compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw";
>> +			reg = <0x0 0x0f521000 0x0 0x1000>;
>> +			reg-names = "freq-domain0";
>> +			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupt-names = "dcvsh-irq-0";
>> +			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
>> +			clock-names = "xo", "alternate";
>> +
>> +			#freq-domain-cells = <1>;
>> +			#clock-cells = <1>;
>> +		};
>> +	};
>> +
>> +	thermal-zones {
>> +		mapss-thermal {
>> +			polling-delay-passive = <0>;
>> +			polling-delay = <0>;
>> +
>> +			thermal-sensors = <&tsens0 0>;
>> +
>> +			trips {
>> +				mapss_alert0: trip-point0 {
>> +					temperature = <90000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				mapss_alert1: trip-point1 {
>> +					temperature = <95000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				mapss_crit: mapss-crit {
>> +					temperature = <110000>;
>> +					hysteresis = <1000>;
>> +					type = "critical";
>> +				};
>> +			};
>> +		};
>> +
>> +		video-thermal {
>> +			polling-delay-passive = <0>;
>> +			polling-delay = <0>;
>> +
>> +			thermal-sensors = <&tsens0 1>;
>> +
>> +			trips {
>> +				video_alert0: trip-point0 {
>> +					temperature = <90000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				video_alert1: trip-point1 {
>> +					temperature = <95000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				video_crit: video-crit {
>> +					temperature = <110000>;
>> +					hysteresis = <1000>;
>> +					type = "critical";
>> +				};
>> +			};
>> +		};
>> +
>> +		wlan-thermal {
>> +			polling-delay-passive = <0>;
>> +			polling-delay = <0>;
>> +
>> +			thermal-sensors = <&tsens0 2>;
>> +
>> +			trips {
>> +				wlan_alert0: trip-point0 {
>> +					temperature = <90000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				wlan_alert1: trip-point1 {
>> +					temperature = <95000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				wlan_crit: wlan-crit {
>> +					temperature = <110000>;
>> +					hysteresis = <1000>;
>> +					type = "critical";
>> +				};
>> +			};
>> +		};
>> +
>> +		cpuss0-thermal {
>> +			polling-delay-passive = <0>;
>> +			polling-delay = <0>;
>> +
>> +			thermal-sensors = <&tsens0 3>;
>> +
>> +			trips {
>> +				cpuss0_alert0: trip-point0 {
>> +					temperature = <90000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				cpuss0_alert1: trip-point1 {
>> +					temperature = <95000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				cpuss0_crit: cpuss0-crit {
>> +					temperature = <110000>;
>> +					hysteresis = <1000>;
>> +					type = "critical";
>> +				};
>> +			};
>> +		};
>> +
>> +		cpuss1-thermal {
>> +			polling-delay-passive = <0>;
>> +			polling-delay = <0>;
>> +
>> +			thermal-sensors = <&tsens0 4>;
>> +
>> +			trips {
>> +				cpuss1_alert0: trip-point0 {
>> +					temperature = <90000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				cpuss1_alert1: trip-point1 {
>> +					temperature = <95000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				cpuss1_crit: cpuss1-crit {
>> +					temperature = <110000>;
>> +					hysteresis = <1000>;
>> +					type = "critical";
>> +				};
>> +			};
>> +		};
>> +
>> +		mdm0-thermal {
>> +			polling-delay-passive = <0>;
>> +			polling-delay = <0>;
>> +
>> +			thermal-sensors = <&tsens0 5>;
>> +
>> +			trips {
>> +				mdm0_alert0: trip-point0 {
>> +					temperature = <90000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				mdm0_alert1: trip-point1 {
>> +					temperature = <95000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				mdm0_crit: mdm0-crit {
>> +					temperature = <110000>;
>> +					hysteresis = <1000>;
>> +					type = "critical";
>> +				};
>> +			};
>> +		};
>> +
>> +		mdm1-thermal {
>> +			polling-delay-passive = <0>;
>> +			polling-delay = <0>;
>> +
>> +			thermal-sensors = <&tsens0 6>;
>> +
>> +			trips {
>> +				mdm1_alert0: trip-point0 {
>> +					temperature = <90000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				mdm1_alert1: trip-point1 {
>> +					temperature = <95000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				mdm1_crit: mdm1-crit {
>> +					temperature = <110000>;
>> +					hysteresis = <1000>;
>> +					type = "critical";
>> +				};
>> +			};
>> +		};
>> +
>> +		gpu-thermal {
>> +			polling-delay-passive = <0>;
>> +			polling-delay = <0>;
>> +
>> +			thermal-sensors = <&tsens0 7>;
>> +
>> +			trips {
>> +				gpu_alert0: trip-point0 {
>> +					temperature = <90000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				gpu_alert1: trip-point1 {
>> +					temperature = <95000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				gpu_crit: gpu-crit {
>> +					temperature = <110000>;
>> +					hysteresis = <1000>;
>> +					type = "critical";
>> +				};
>> +			};
>> +		};
>> +
>> +		hm-center-thermal {
>> +			polling-delay-passive = <0>;
>> +			polling-delay = <0>;
>> +
>> +			thermal-sensors = <&tsens0 8>;
>> +
>> +			trips {
>> +				hm_center_alert0: trip-point0 {
>> +					temperature = <90000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				hm_center_alert1: trip-point1 {
>> +					temperature = <95000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				hm_center_crit: hm-center-crit {
>> +					temperature = <110000>;
>> +					hysteresis = <1000>;
>> +					type = "critical";
>> +				};
>> +			};
>> +		};
>> +
>> +		camera-thermal {
>> +			polling-delay-passive = <0>;
>> +			polling-delay = <0>;
>> +
>> +			thermal-sensors = <&tsens0 9>;
>> +
>> +			trips {
>> +				camera_alert0: trip-point0 {
>> +					temperature = <90000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				camera_alert1: trip-point1 {
>> +					temperature = <95000>;
>> +					hysteresis = <2000>;
>> +					type = "passive";
>> +				};
>> +
>> +				camera_crit: camera-crit {
>> +					temperature = <110000>;
>> +					hysteresis = <1000>;
>> +					type = "critical";
>> +				};
>> +			};
>> +		};
>> +	};
>> +
>> +	timer {
>> +		compatible = "arm,armv8-timer";
>> +		interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> +			     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> +			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> +			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>> +	};
>> +};
>>
>> -- 
>> 2.40.0
>>