@@ -27,7 +27,7 @@ static void msm_hdmi_power_on(struct drm_bridge *bridge)
const struct hdmi_platform_config *config = hdmi->config;
int ret;
- pm_runtime_get_sync(&hdmi->pdev->dev);
+ pm_runtime_resume_and_get(&hdmi->pdev->dev);
ret = regulator_bulk_enable(config->pwr_reg_cnt, hdmi->pwr_regs);
if (ret)
@@ -85,7 +85,12 @@ int msm_hdmi_hpd_enable(struct drm_bridge *bridge)
if (hdmi->hpd_gpiod)
gpiod_set_value_cansleep(hdmi->hpd_gpiod, 1);
- pm_runtime_get_sync(dev);
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "runtime resume failed: %d\n", ret);
+ goto fail;
+ }
+
ret = clk_bulk_prepare_enable(config->hpd_clk_cnt, hdmi->hpd_clks);
if (ret)
goto fail;
@@ -179,7 +184,10 @@ static enum drm_connector_status detect_reg(struct hdmi *hdmi)
uint32_t hpd_int_status = 0;
int ret;
- pm_runtime_get_sync(&hdmi->pdev->dev);
+ ret = pm_runtime_resume_and_get(&hdmi->pdev->dev);
+ if (ret)
+ goto out;
+
ret = clk_bulk_prepare_enable(config->hpd_clk_cnt, hdmi->hpd_clks);
if (ret)
goto out;
@@ -57,7 +57,11 @@ int msm_hdmi_phy_resource_enable(struct hdmi_phy *phy)
struct device *dev = &phy->pdev->dev;
int i, ret = 0;
- pm_runtime_get_sync(dev);
+ ret = pm_runtime_resume_and_get(dev);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "runtime resume failed: %d\n", ret);
+ return ret;
+ }
ret = regulator_bulk_enable(cfg->num_regs, phy->regs);
if (ret) {
The pm_runtime_get_sync() function is a bad choise for runtime power management. Switch HDMI driver to pm_runtime_resume_and_get() and add proper error handling, while we are at it. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/msm/hdmi/hdmi_bridge.c | 2 +- drivers/gpu/drm/msm/hdmi/hdmi_hpd.c | 12 ++++++++++-- drivers/gpu/drm/msm/hdmi/hdmi_phy.c | 6 +++++- 3 files changed, 16 insertions(+), 4 deletions(-)