diff mbox series

[v3,4/4] arm64: dts: qcom: ipq5018: indicate that SDI should be disabled

Message ID 20230816164641.3371878-4-robimarko@gmail.com
State Accepted
Commit 79796e87215db9587d6c66ec6f6781e091bc6464
Headers show
Series [v3,1/4] dt-bindings: firmware: qcom,scm: support indicating SDI default state | expand

Commit Message

Robert Marko Aug. 16, 2023, 4:45 p.m. UTC 
Now that SCM has support for indicating that SDI has been enabled by
default, lets set the property so SCM disables it during probing.

Signed-off-by: Robert Marko <robimarko@gmail.com>
---
Changes in v3:
* Use the new boolean property
---
 arch/arm64/boot/dts/qcom/ipq5018.dtsi | 1 +
 1 file changed, 1 insertion(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 9f13d2dcdfd5..bd0198aaf8d0 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -57,6 +57,7 @@  L2_0: l2-cache {
 	firmware {
 		scm {
 			compatible = "qcom,scm-ipq5018", "qcom,scm";
+			qcom,sdi-enabled;
 		};
 	};