| Message ID | 20231108-nia-sm8350-for-upstream-v3-6-18a024b5c74c@igalia.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | support oneplus-lemonade(p) devices | expand |
On Wed, 8 Nov 2023 at 19:50, Nia Espera <nespera@igalia.com> wrote: > > Device tree files for OnePlus 9 and 9 Pro. Details of supported features > mentioned in the cover letter for this patch series, but for > accessibility also repeated here: > > - USB OTG > - UFS > - Framebuffer display > - Touchscreen (for lemonade) > - Power & volume down keys > - Battery reading > - Modem, IPA, and remoteproc bringup > > Steps to get booting: > > - Wipe dtbo partition > - Flash vbmeta with disabled verity bit > - Flash kernel and initfs to boot partition with CLI args pd_ignore_unused > and clk_ignore_unused as v1 bootimg > - Flash rootfs to some other partition (probably super or userdata) > > Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> > Signed-off-by: Nia Espera <nespera@igalia.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 2 + > .../arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi | 1088 ++++++++++++++++++++ > .../boot/dts/qcom/sm8350-oneplus-lemonade.dts | 85 ++ > .../boot/dts/qcom/sm8350-oneplus-lemonadep.dts | 20 + > 4 files changed, 1195 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 2cca20563a1d..369ad4721b29 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -211,6 +211,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-csot.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sm8350-oneplus-lemonade.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sm8350-oneplus-lemonadep.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx214.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb > diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi > new file mode 100644 > index 000000000000..dd560035d2b5 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi > @@ -0,0 +1,1088 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2023 Igalia S.L. > + * Authors: > + * Nia Espera <nespera@igalia.com> > + */ > + > +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> > +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350b.h> > +#define SMB139x_1_SID 0x0b > +#define SMB139x_2_SID 0x0c > +#include <dt-bindings/iio/qcom,spmi-adc7-smb139x.h> > +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include "sm8350.dtsi" > +#include "pm8350.dtsi" > +#include "pm8350b.dtsi" > +#include "pm8350c.dtsi" > +#include "pmk8350.dtsi" > +#include "pmr735a.dtsi" > +#include "pmr735b.dtsi" > + > +/ { > + chassis-type = "handset"; > + interrupt-parent = <&intc>; > + > + bat: battery { > + compatible = "simple-battery"; > + device-chemistry = "lithium-ion"; > + voltage-min-design-microvolt = <3200000>; > + energy-full-design-microwatt-hours = <15840000>; > + charge-full-design-microamp-hours = <2225000>; > + }; > + > + chosen { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + framebuffer: framebuffer@e4d00000 { > + compatible = "simple-framebuffer"; > + reg = <0 0xe4d00000 0 0x2400000>; > + width = <1080>; > + height = <2412>; > + stride = <(1080 * 4)>; > + format = "a8r8g8b8"; > + /* > + * That's (going to be) a lot of clocks, but it's > + * necessary due to unused clk cleanup & no panel > + * driver yet. > + */ > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, > + <&gcc GCC_DISP_SF_AXI_CLK>; > + }; > + }; > + > + display_panel_avdd: display-regulator { Can you please rename to regulator-display? > + compatible = "regulator-fixed"; > + regulator-name = "display_panel_avdd"; > + regulator-min-microvolt = <5500000>; > + regulator-max-microvolt = <5500000>; > + regulator-enable-ramp-delay = <233>; > + > + enable-active-high; > + regulator-boot-on; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&vol_down_n>; > + > + key-vol-up { > + label = "Volume Up"; > + linux,code = <KEY_VOLUMEUP>; > + gpios = <&pmk8350_gpios 6 GPIO_ACTIVE_LOW>; > + debounce-interval = <15>; > + linux,can-disable; > + wakeup-source; > + }; > + }; > + > + pmic-glink { > + compatible = "qcom,sm8350-pmic-glink", "qcom,pmic-glink"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + connector@0 { > + compatible = "usb-c-connector"; > + reg = <0>; > + power-role = "dual"; > + data-role = "dual"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + pmic_glink_hs_in: endpoint { > + remote-endpoint = <&usb_1_dwc3_hs>; > + }; > + }; > + > + /* USB3 not working, so no port@1 */ > + > + port@2 { > + reg = <2>; > + > + pmic_glink_sbu: endpoint { > + remote-endpoint = <&fsa4480_sbu_mux>; > + }; > + }; > + }; > + }; > + }; > + > + vph_pwr: vph-pwr-regulator { ... and this to regulator-vph-pwr, so that both regulators will be close in the DT. > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + > + regulator-always-on; > + regulator-boot-on; > + }; > +}; > + > +&adsp { > + firmware-name = "qcom/sm8350/lemonade/adsp.mbn"; Please add vendor too: firmware-name = "qcom/sm8350/oneplus/lemonade/adsp.mbn"; (or OnePlus, as is their official name). > + status = "okay"; > +}; > + > +&apps_rsc { > + regulators-0 { > + compatible = "qcom,pm8350-rpmh-regulators"; > + qcom,pmic-id = "b"; > + > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + vdd-s3-supply = <&vph_pwr>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-s6-supply = <&vph_pwr>; > + vdd-s7-supply = <&vph_pwr>; > + vdd-s8-supply = <&vph_pwr>; > + vdd-s9-supply = <&vph_pwr>; > + vdd-s10-supply = <&vph_pwr>; > + vdd-s11-supply = <&vph_pwr>; > + vdd-s12-supply = <&vph_pwr>; > + > + vdd-l1-l4-supply = <&pm8350_s11>; > + vdd-l2-l7-supply = <&vreg_bob>; > + vdd-l3-l5-supply = <&vreg_bob>; > + vdd-l6-l9-l10-supply = <&pm8350_s11>; > + vdd-l8-supply = <&pmr735a_s2>; > + > + /* > + * ARC regulators: > + * S5 - mx.lvl > + * S6 - gfx.lvl > + * S9 - mxc.lvl > + */ > + > + pm8350_s10: smps10 { > + regulator-name = "pm8350_s10"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8350_s11: smps11 { > + regulator-name = "pm8350_s11"; > + regulator-min-microvolt = <752000>; > + regulator-max-microvolt = <1012000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8350_s12: smps12 { > + regulator-name = "pm8350_s12"; > + regulator-min-microvolt = <1224000>; > + regulator-max-microvolt = <1360000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8350_l1: ldo1 { > + regulator-name = "pm8350_l1"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8350_l2: ldo2 { > + regulator-name = "pm8350_l2"; > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3072000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8350_l3: ldo3 { > + regulator-name = "pm8350_l3"; > + regulator-min-microvolt = <904000>; > + regulator-max-microvolt = <904000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + /* L4 - lmx.lvl (ARC) */ > + > + pm8350_l5: ldo5 { > + regulator-name = "pm8350_l5"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <888000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-allow-set-load; > + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8350_l6: ldo6 { > + regulator-name = "pm8350_l6"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1208000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-allow-set-load; > + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8350_l7: ldo7 { > + regulator-name = "pm8350_l7"; > + regulator-min-microvolt = <2400000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-allow-set-load; > + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + /* L8 - lcx.lvl (ARC) */ > + > + pm8350_l9: ldo9 { > + regulator-name = "pm8350_l9"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-allow-set-load; > + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + regulators-1 { > + compatible = "qcom,pm8350c-rpmh-regulators"; > + qcom,pmic-id = "c"; > + > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + vdd-s3-supply = <&vph_pwr>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-s6-supply = <&vph_pwr>; > + vdd-s7-supply = <&vph_pwr>; > + vdd-s8-supply = <&vph_pwr>; > + vdd-s9-supply = <&vph_pwr>; > + vdd-s10-supply = <&vph_pwr>; > + > + vdd-l1-l12-supply = <&pm8350c_s1>; > + vdd-l2-l8-supply = <&pm8350c_s1>; > + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; > + vdd-l6-l9-l11-supply = <&vreg_bob>; > + vdd-l10-supply = <&pm8350_s12>; > + > + vdd-bob-supply = <&vph_pwr>; > + > + pm8350c_s1: smps1 { > + regulator-name = "pm8350c_s1"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1952000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + /* S2 - ebi.lvl (ARC) */ > + > + pm8350c_s3: smps3 { > + regulator-name = "pm8350c_s3"; > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <704000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + /* > + * ARC regulators: > + * S4 - mss.lvl > + * S6 - cx.lvl > + * S8 - mmcx.lvl > + */ > + > + pm8350c_s10: smps10 { > + regulator-name = "pm8350c_s10"; > + regulator-min-microvolt = <1048000>; > + regulator-max-microvolt = <1128000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8350c_l1: ldo1 { > + regulator-name = "pm8350c_l1"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8350c_l2: ldo2 { > + regulator-name = "pm8350c_l2"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8350c_l3: ldo3 { > + regulator-name = "pm8350c_l3"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8350c_l4: ldo4 { > + regulator-name = "pm8350c_l4"; > + regulator-min-microvolt = <1704000>; > + regulator-max-microvolt = <3000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8350c_l5: ldo5 { > + regulator-name = "pm8350c_l5"; > + regulator-min-microvolt = <1704000>; > + regulator-max-microvolt = <3000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8350c_l6: ldo6 { > + regulator-name = "pm8350c_l6"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8350c_l7: ldo7 { > + regulator-name = "pm8350c_l7"; > + regulator-min-microvolt = <3008000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8350c_l8: ldo8 { > + regulator-name = "pm8350c_l8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8350c_l9: ldo9 { > + regulator-name = "pm8350c_l9"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8350c_l10: ldo10 { > + regulator-name = "pm8350c_l10"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8350c_l11: ldo11 { > + regulator-name = "pm8350c_l11"; > + regulator-min-microvolt = <2400000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8350c_l12: ldo12 { > + regulator-name = "pm8350c_l12"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + pm8350c_l13: ldo13 { > + regulator-name = "pm8350c_l13"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_bob: bob { > + regulator-name = "vreg_bob"; > + regulator-min-microvolt = <3400000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; > + }; > + }; > + > + /* pm8350b has one regulator here; unused for now */ > + > + regulators-2 { > + compatible = "qcom,pmr735a-rpmh-regulators"; > + qcom,pmic-id = "e"; > + > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + vdd-s3-supply = <&vph_pwr>; > + > + vdd-l1-l2-supply = <&pmr735a_s2>; > + vdd-l3-supply = <&pmr735a_s1>; > + vdd-l4-supply = <&pm8350c_s1>; > + vdd-l5-l6-supply = <&pm8350c_s1>; > + vdd-l7-bob-supply = <&vreg_bob>; > + > + pmr735a_s1: smps1 { > + regulator-name = "pmr735a_s1"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1280000>; > + }; > + > + pmr735a_s2: smps2 { > + regulator-name = "pmr735a_s2"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <976000>; > + }; > + > + pmr735a_s3: smps3 { > + regulator-name = "pmr735a_s3"; > + regulator-min-microvolt = <2208000>; > + regulator-max-microvolt = <2352000>; > + }; > + > + pmr735a_l1: ldo1 { > + regulator-name = "pmr735a_l1"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <912000>; > + }; > + > + pmr735a_l2: ldo2 { > + regulator-name = "pmr735a_l2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + pmr735a_l3: ldo3 { > + regulator-name = "pmr735a_l3"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + pmr735a_l4: ldo4 { > + regulator-name = "pmr735a_l4"; > + regulator-min-microvolt = <1776000>; > + regulator-max-microvolt = <1872000>; > + }; > + > + pmr735a_l5: ldo5 { > + regulator-name = "pmr735a_l5"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <800000>; > + }; > + > + pmr735a_l6: ldo6 { > + regulator-name = "pmr735a_l6"; > + regulator-min-microvolt = <480000>; > + regulator-max-microvolt = <904000>; > + }; > + > + pmr735a_l7: ldo7 { > + regulator-name = "pmr735a_l7"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + }; > + }; > +}; > + > +&cdsp { > + firmware-name = "qcom/sm8350/lemonade/cdsp.mbn"; > + status = "okay"; > +}; > + > +&i2c2 { > + clock-frequency = <100000>; > + status = "okay"; > + > + bq27541: fuel-gauge@55 { > + compatible = "ti,bq27541"; > + reg = <0x55>; > + monitored-battery = <&bat>; > + }; > +}; > + > +&i2c4 { > + clock-frequency = <400000>; > + status = "okay"; > + > + /* Touchscreens: Syna TCM oncell or Samsung s6sy761 */ > +}; > + > +&i2c13 { > + clock-frequency = <100000>; > + status = "okay"; > + > + typec-mux@42 { > + compatible = "fcs,fsa4480"; > + reg = <0x42>; > + > + interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; > + > + vcc-supply = <&vreg_bob>; > + mode-switch; > + orientation-switch; > + > + port { > + fsa4480_sbu_mux: endpoint { > + remote-endpoint = <&pmic_glink_sbu>; > + }; > + }; > + }; > + > + /* Qualcomm PM8008i/PM8008j @ 8, 9, c, d */ > +}; > + > +&i2c15 { > + clock-frequency = <400000>; > + status = "okay"; > + > + /* sn-nci NFC controller @ 28 */ > +}; > + > +&gpi_dma0 { > + status = "okay"; > +}; > + > +&gpi_dma1 { > + status = "okay"; > +}; > + > +&gpi_dma2 { > + status = "okay"; > +}; > + > +&ipa { > + qcom,gsi-loader = "self"; > + memory-region = <&pil_ipa_fw_mem>; > + firmware-name = "qcom/sm8350/lemonade/ipa_fws.mbn"; > + status = "okay"; > +}; > + > +&mpss { > + firmware-name = "qcom/sm8350/lemonade/modem.mbn"; > + status = "okay"; > +}; > + > +&pcie0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie0_default_state>; > + > + perst-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; > + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; > + > + status = "okay"; > +}; > + > +&pcie0_phy { > + vdda-phy-supply = <&pm8350_l5>; > + vdda-pll-supply = <&pm8350_l6>; > + > + status = "okay"; > +}; > + > +&pm8350_gpios { > + gpio1_adc_default: gpio1-adc-default-state { > + pins = "gpio1"; > + function = "normal"; > + bias-high-impedance; > + bias-disable; > + }; > + > + gpio3_adc_default: gpio3-adc-default-state { > + pins = "gpio3"; > + function = "normal"; > + bias-high-impedance; > + bias-disable; > + }; > +}; > + > +&pm8350_gpios { You can probably merge these two nodes (unless there is a typo somewhere). > + vol_down_n: vol-down-n-state { > + pins = "gpio6"; > + function = "normal"; > + power-source = <1>; > + bias-pull-up; > + input-enable; > + }; > +}; > + > +&pmk8350_adc_tm { > + status = "okay"; > + > + pm8350-msm-therm@0 { > + reg = <0>; > + io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>; > + qcom,ratiometric; > + qcom,hw-settle-time-us = <200>; > + }; > + > + pm8350-cam-flash-therm@1 { > + reg = <1>; > + io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>; > + qcom,ratiometric; > + qcom,hw-settle-time-us = <200>; > + }; > + > + pm8350-hot-pocket-therm@2 { > + reg = <2>; > + io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>; > + qcom,ratiometric; > + qcom,hw-settle-time-us = <200>; > + }; > + > + pm8350-wide-rfc-therm@3 { > + reg = <3>; > + io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>; > + qcom,ratiometric; > + qcom,hw-settle-time-us = <200>; > + }; > + > + pm8350-rear-tof-therm@4 { > + reg = <4>; > + io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM5_100K_PU(1)>; > + qcom,ratiometric; > + qcom,hw-settle-time-us = <200>; > + }; > + > + pm8350b-usb-conn-therm@5 { > + reg = <5>; > + io-channels = <&pmk8350_vadc PM8350B_ADC7_AMUX_THM4_100K_PU>; > + qcom,ratiometric; > + qcom,hw-settle-time-us = <200>; > + }; > + > + pm8350b-wl-chg-therm@6 { > + reg = <6>; > + io-channels = <&pmk8350_vadc PM8350B_ADC7_GPIO2_100K_PU>; > + qcom,ratiometric; > + qcom,hw-settle-time-us = <200>; > + }; > +}; > + > +&pmk8350_rtc { > + status = "okay"; > +}; > + > +&pmk8350_vadc { > + pinctrl-names = "default"; > + pinctrl-0 = <&gpio1_adc_default>, <&gpio3_adc_default>; > + > + /* pmk8350-ref-gnd */ > + channel@0 { > + reg = <0x00>; > + qcom,pre-scaling = <1 1>; > + label = "pmk8350_ref_gnd"; > + }; > + > + /* pmk8350-vref-1p25 */ > + channel@1 { > + reg = <0x01>; > + qcom,pre-scaling = <1 1>; > + label = "pmk8350_vref_1p25"; > + }; > + > + /* pmk8350-die-temp */ > + channel@3 { > + reg = <0x03>; > + qcom,pre-scaling = <1 1>; > + label = "pmk8350_die_temp"; > + }; > + > + /* pm8350-ref-gnd */ > + channel@100 { > + reg = <0x100>; > + qcom,pre-scaling = <1 1>; > + label = "pm8350_ref_gnd"; > + }; > + > + /*pm8350-vref-1p25*/ > + channel@101 { > + reg = <0x101>; > + qcom,pre-scaling = <1 1>; > + label = "pm8350_vref_1p25"; > + }; > + > + /* pm8350-die-temp */ > + channel@103 { > + reg = <0x103>; > + qcom,pre-scaling = <1 1>; > + label = "pm8350_die_temp"; > + }; > + > + /* gpio1-v */ > + channel@128 { > + reg = <0x128>; > + qcom,ratiometric; > + qcom,hw-settle-time = <700>; > + qcom,pre-scaling = <1 1>; > + label = "gpio1_v"; > + }; > + > + /* gpio3-v */ > + channel@12b { > + reg = <0x12b>; > + qcom,ratiometric; > + qcom,hw-settle-time = <700>; > + qcom,pre-scaling = <1 1>; > + label = "gpio3_v"; > + }; > + > + /* pm8350-msm-therm */ > + channel@144 { > + reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>; > + qcom,ratiometric; > + qcom,hw-settle-time = <200>; > + qcom,pre-scaling = <1 1>; > + label = "pm8350_msm_therm"; > + }; > + > + /* pm8350-cam-flash-therm */ > + channel@145 { > + reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>; > + qcom,ratiometric; > + qcom,hw-settle-time = <200>; > + qcom,pre-scaling = <1 1>; > + label = "pm8350_cam_flash_therm"; > + }; > + > + /* pm8350-hot-pocket-therm */ > + channel@146 { > + reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>; > + qcom,ratiometric; > + qcom,hw-settle-time = <200>; > + qcom,pre-scaling = <1 1>; > + label = "pm8350_hot_pocket_therm"; > + }; > + > + /* pm8350-wide-rfc-therm */ > + channel@147 { > + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; > + qcom,ratiometric; > + qcom,hw-settle-time = <200>; > + qcom,pre-scaling = <1 1>; > + label = "pm8350_wide_rfc_therm"; > + }; > + > + /* pm8350-rear-tof-therm */ > + channel@148 { > + reg = <PM8350_ADC7_AMUX_THM5_100K_PU(1)>; > + qcom,ratiometric; > + qcom,hw-settle-time = <200>; > + qcom,pre-scaling = <1 1>; > + label = "pm8350_rear_tof_therm"; > + }; > + > + /* pm8350-vph-pwr */ > + channel@18e { > + reg = <0x18e>; > + qcom,pre-scaling = <1 3>; > + label = "pm8350_vph_pwr"; > + }; > + > + /* pm8350b-ref-gnd */ > + channel@300 { > + reg = <0x300>; > + qcom,pre-scaling = <1 1>; > + label = "pm8350b_ref_gnd"; > + }; > + > + /* pm8350b-vref-1p25 */ > + channel@301 { > + reg = <0x301>; > + qcom,pre-scaling = <1 1>; > + label = "pm8350b_vref_1p25"; > + }; > + > + /* pm8350b-die-temp */ > + channel@303 { > + reg = <0x303>; > + qcom,pre-scaling = <1 1>; > + label = "pm8350b_die_temp"; > + }; > + > + /* pm8350b-chg-temp */ > + channel@310 { > + reg = <PM8350B_ADC7_CHG_TEMP>; > + qcom,pre-scaling = <1 1>; > + label = "pm8350b_chg_temp"; > + }; > + > + /* pm8350b-usb-conn-therm */ > + channel@347 { > + reg = <PM8350B_ADC7_AMUX_THM4_100K_PU>; > + qcom,ratiometric; > + qcom,hw-settle-time = <200>; > + qcom,pre-scaling = <1 1>; > + label = "pm8350b_usb_conn_therm"; > + }; > + > + /* pm8350b-wl-chg-therm */ > + channel@34b { > + reg = <PM8350B_ADC7_GPIO2_100K_PU>; > + qcom,ratiometric; > + qcom,hw-settle-time = <200>; > + qcom,pre-scaling = <1 1>; > + label = "pm8350b_wl_chg_therm"; > + }; > + > + /* pm8350b-vph-pwr */ > + channel@38e { > + reg = <0x38e>; > + qcom,pre-scaling = <1 3>; > + label = "pm8350b_vph_pwr"; > + }; > + > + /* pm8350b-vbat-sns */ > + channel@38f { > + reg = <0x38f>; > + qcom,pre-scaling = <1 3>; > + label = "pm8350b_vbat_sns"; > + }; > + > + /* pmr735a-ref-gnd */ > + channel@400 { > + reg = <0x400>; > + qcom,pre-scaling = <1 1>; > + label = "pmr735a_ref_gnd"; > + }; > + > + /* pmr735a-vref-1p25 */ > + channel@401 { > + reg = <0x401>; > + qcom,pre-scaling = <1 1>; > + label = "pmr735a_vref_1p25"; > + }; > + > + /* pmr735a-die-temp */ > + channel@403 { > + reg = <0x403>; > + qcom,pre-scaling = <1 1>; > + label = "pmr735a_die_temp"; > + }; > + > + /* pmr735b-ref-gnd */ > + channel@500 { > + reg = <0x500>; > + qcom,pre-scaling = <1 1>; > + label = "pmr735b_ref_gnd"; > + }; > + > + /* pmr735b-vref-1p25 */ > + channel@501 { > + reg = <0x501>; > + qcom,pre-scaling = <1 1>; > + label = "pmr735b_vref_1p25"; > + }; > + > + /* pmr735b-die-temp */ > + channel@503 { > + reg = <0x503>; > + qcom,pre-scaling = <1 1>; > + label = "pmr735b_die_temp"; > + }; > + > + /* smb139x-1-smb-temp */ > + channel@b06 { > + reg = <SMB139x_1_ADC7_SMB_TEMP>; > + qcom,pre-scaling = <1 1>; > + label = "smb139x_1_smb_temp"; > + }; > + > + /* smb139x-2-smb-temp */ > + channel@c06 { > + reg = <SMB139x_2_ADC7_SMB_TEMP>; > + qcom,pre-scaling = <1 1>; > + label = "smb139x_2_smb_temp"; > + }; > +}; > + > +&pon_pwrkey { > + status = "okay"; > +}; > + > +&pon_resin { > + linux,code = <KEY_VOLUMEUP>; > + status = "okay"; > +}; > + > +&qupv3_id_0 { > + status = "okay"; > +}; > + > +&qupv3_id_1 { > + status = "okay"; > +}; > + > +&qupv3_id_2 { > + status = "okay"; > +}; > + > +&reserved_memory { > + bootloader-log@9fff7000 { > + reg = <0 0x9fff7000 0 0x8000>; > + }; > + > + framebuffer@e1000000 { > + reg = <0 0xe4d00000 0 0x2400000>; > + no-map; > + }; > + > + ramoops: ramoops@E9700000 { > + compatible = "ramoops"; > + reg = <0 0xe9700000 0 0x5b8000>; > + record-size = <0x40000>; > + console-size = <0x40000>; > + ftrace-size = <0x200000>; > + pmsg-size = <0x200000>; > + ecc-size = <0>; > + }; > + > + reserved@ea700000 { > + reg = <0 0xea700000 0 0x800000>; > + }; > +}; > + > +&removed_mem { > + reg = <0 0xd8800000 0 0x8e00000>; > +}; > + > +&slpi { > + firmware-name = "qcom/sm8350/lemonade/slpi.mbn"; > + status = "okay"; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <52 8>; > + > + pcie0_default_state: pcie0-default-state { > + perst-pins { > + pins = "gpio94"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-down; > + }; > + > + clkreq-pins { > + pins = "gpio95"; > + function = "pcie0_clkreqn"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + wake-pins { > + pins = "gpio96"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + sleep-pins { > + pins = "gpio95"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + }; > + > + pcie1_default_state: pcie1-default-state { > + perst-pins { > + pins = "gpio97"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-down; > + }; > + > + clkreq-pins { > + pins = "gpio98"; > + function = "pcie1_clkreqn"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + wake-pins { > + pins = "gpio99"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + /* wil6210_refclk_en_pin lives here also */ > + }; > + }; > + > + /* Modem-related pin common on both devices */ > + rf_cable_ant0_active: rf-cable-ant0-active-state { > + pins = "gpio165"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + tp_rst_active: tp-rst-active-state { > + pins = "gpio22"; > + function = "gpio"; > + drive-strength = <8>; > + bias-pull-up; > + }; > + > + /* tp_rst_suspend pinctrl is different per device, don't specify here */ > + > + tp_irq_active: tp-irq-active-state { > + pins = "gpio23"; > + function = "gpio"; > + drive-strength = <8>; > + bias-disable; > + }; > + > + tp_irq_suspend: tp-irq-suspend-state { > + pins = "gpio23"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-down; > + }; > +}; > + > +&ufs_mem_hc { > + reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>; > + > + vcc-supply = <&pm8350_l7>; > + vcc-max-microamp = <800000>; > + vccq-supply = <&pm8350_l9>; > + vccq-max-microamp = <900000>; > + > + status = "okay"; > +}; > + > +&ufs_mem_phy { > + vdda-phy-supply = <&pm8350_l5>; > + vdda-pll-supply = <&pm8350_l6>; > + > + status = "okay"; > +}; > + > +&usb_1 { > + /* > + * Bug in interconnect driver breaks USB; RPMh is unable to power on > + * USB regulators without this. > + */ > + /delete-property/ interconnects; > + /delete-property/ interconnect-names; > + > + /* USB3 seems broken (though it's enabled downstream?) */ > + qcom,select-utmi-as-pipe-clk; > + > + status = "okay"; > +}; > + > +&usb_1_dwc3 { > + dr_mode = "otg"; > + maximum-speed = "high-speed"; > + phys = <&usb_1_hsphy>; > + phy-names = "usb2-phy"; > +}; > + > +&usb_1_dwc3_hs { > + remote-endpoint = <&pmic_glink_hs_in>; > +}; > + > +&usb_1_hsphy { > + vdda-pll-supply = <&pm8350_l5>; > + vdda18-supply = <&pm8350c_l1>; > + vdda33-supply = <&pm8350_l2>; > + > + status = "okay"; > +}; > diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonade.dts b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonade.dts > new file mode 100644 > index 000000000000..473f10d4fcf0 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonade.dts > @@ -0,0 +1,85 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2023 Igalia S.L. > + * Authors: > + * Nia Espera <nespera@igalia.com> > + */ > + > +/dts-v1/; > + > +#include "sm8350-oneplus-common.dtsi" > + > +/ { > + compatible = "oneplus,lemonade", "qcom,sm8350"; > + model = "OnePlus 9"; > +}; > + > +&i2c4 { > + touchscreen@48 { > + compatible = "samsung,s6sy761"; > + reg = <0x48>; > + interrupts-extended = <&tlmm 23 IRQ_TYPE_LEVEL_LOW>; > + > + avdd-supply = <&pm8350c_l13>; > + vdd-supply = <&pm8350c_l8>; > + > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&tp_rst_active>, <&tp_irq_active>, <&tp_enable_2v8>; > + pinctrl-1 = <&tp_rst_suspend>, <&tp_irq_suspend>; > + }; > +}; > + > +&mpss { > + pinctrl-names = "default"; > + pinctrl-0 = <&rf_cable_ant0_active>, > + <&rf_cable_ant1_active>, > + <&rf_cable_ant2_active>, > + <&rf_cable_ant3_active>, > + <&rf_cable_ant7_active>; > +}; > + > +&tlmm { > + /* Modem antenna pins exclusive to lemonade */ > + rf_cable_ant1_active: rf-cable-ant1-active-state { > + pins = "gpio27"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + rf_cable_ant2_active: rf-cable-ant2-active-state { > + pins = "gpio92"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + rf_cable_ant3_active: rf-cable-ant3-active-state { > + pins = "gpio44"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + rf_cable_ant7_active: rf-cable-ant7-active-state { > + pins = "gpio155"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + tp_rst_suspend: tp-rst-suspend-state { > + pins = "gpio22"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-down; > + }; > + > + tp_enable_2v8: tp-enable-2v8-state { > + pins = "gpio74"; > + function = "gpio"; > + drive-strength = <8>; > + bias-pull-up; > + output-high; > + }; > +}; > diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonadep.dts b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonadep.dts > new file mode 100644 > index 000000000000..bc7e5654bd3d > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonadep.dts > @@ -0,0 +1,20 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2023 Igalia S.L. > + * Authors: > + * Nia Espera <nespera@igalia.com> > + */ > + > +/dts-v1/; > + > +#include "sm8350-oneplus-common.dtsi" > + > +/ { > + compatible = "oneplus,lemonadep", "qcom,sm8350"; > + model = "OnePlus 9 Pro"; > +}; > + > +&mpss { > + pinctrl-names = "default"; > + pinctrl-0 = <&rf_cable_ant0_active>; > +}; > > -- > 2.42.1 > >
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 2cca20563a1d..369ad4721b29 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -211,6 +211,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-csot.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8350-oneplus-lemonade.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8350-oneplus-lemonadep.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx214.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-sony-xperia-sagami-pdx215.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-hdk.dtb diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi new file mode 100644 index 000000000000..dd560035d2b5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-common.dtsi @@ -0,0 +1,1088 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Igalia S.L. + * Authors: + * Nia Espera <nespera@igalia.com> + */ + +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350b.h> +#define SMB139x_1_SID 0x0b +#define SMB139x_2_SID 0x0c +#include <dt-bindings/iio/qcom,spmi-adc7-smb139x.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8350.dtsi" +#include "pm8350.dtsi" +#include "pm8350b.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" +#include "pmr735a.dtsi" +#include "pmr735b.dtsi" + +/ { + chassis-type = "handset"; + interrupt-parent = <&intc>; + + bat: battery { + compatible = "simple-battery"; + device-chemistry = "lithium-ion"; + voltage-min-design-microvolt = <3200000>; + energy-full-design-microwatt-hours = <15840000>; + charge-full-design-microamp-hours = <2225000>; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@e4d00000 { + compatible = "simple-framebuffer"; + reg = <0 0xe4d00000 0 0x2400000>; + width = <1080>; + height = <2412>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + /* + * That's (going to be) a lot of clocks, but it's + * necessary due to unused clk cleanup & no panel + * driver yet. + */ + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>; + }; + }; + + display_panel_avdd: display-regulator { + compatible = "regulator-fixed"; + regulator-name = "display_panel_avdd"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + regulator-enable-ramp-delay = <233>; + + enable-active-high; + regulator-boot-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_down_n>; + + key-vol-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pmk8350_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + pmic-glink { + compatible = "qcom,sm8350-pmic-glink", "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + /* USB3 not working, so no port@1 */ + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; + }; + }; + }; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&adsp { + firmware-name = "qcom/sm8350/lemonade/adsp.mbn"; + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + + vdd-l1-l4-supply = <&pm8350_s11>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_bob>; + vdd-l6-l9-l10-supply = <&pm8350_s11>; + vdd-l8-supply = <&pmr735a_s2>; + + /* + * ARC regulators: + * S5 - mx.lvl + * S6 - gfx.lvl + * S9 - mxc.lvl + */ + + pm8350_s10: smps10 { + regulator-name = "pm8350_s10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_s11: smps11 { + regulator-name = "pm8350_s11"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <1012000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_s12: smps12 { + regulator-name = "pm8350_s12"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1360000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l1: ldo1 { + regulator-name = "pm8350_l1"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l2: ldo2 { + regulator-name = "pm8350_l2"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l3: ldo3 { + regulator-name = "pm8350_l3"; + regulator-min-microvolt = <904000>; + regulator-max-microvolt = <904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L4 - lmx.lvl (ARC) */ + + pm8350_l5: ldo5 { + regulator-name = "pm8350_l5"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <888000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l6: ldo6 { + regulator-name = "pm8350_l6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350_l7: ldo7 { + regulator-name = "pm8350_l7"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + /* L8 - lcx.lvl (ARC) */ + + pm8350_l9: ldo9 { + regulator-name = "pm8350_l9"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l12-supply = <&pm8350c_s1>; + vdd-l2-l8-supply = <&pm8350c_s1>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&pm8350_s12>; + + vdd-bob-supply = <&vph_pwr>; + + pm8350c_s1: smps1 { + regulator-name = "pm8350c_s1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1952000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* S2 - ebi.lvl (ARC) */ + + pm8350c_s3: smps3 { + regulator-name = "pm8350c_s3"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* + * ARC regulators: + * S4 - mss.lvl + * S6 - cx.lvl + * S8 - mmcx.lvl + */ + + pm8350c_s10: smps10 { + regulator-name = "pm8350c_s10"; + regulator-min-microvolt = <1048000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l1: ldo1 { + regulator-name = "pm8350c_l1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l2: ldo2 { + regulator-name = "pm8350c_l2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l3: ldo3 { + regulator-name = "pm8350c_l3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l4: ldo4 { + regulator-name = "pm8350c_l4"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l5: ldo5 { + regulator-name = "pm8350c_l5"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l6: ldo6 { + regulator-name = "pm8350c_l6"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l7: ldo7 { + regulator-name = "pm8350c_l7"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l8: ldo8 { + regulator-name = "pm8350c_l8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l9: ldo9 { + regulator-name = "pm8350c_l9"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l10: ldo10 { + regulator-name = "pm8350c_l10"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l11: ldo11 { + regulator-name = "pm8350c_l11"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l12: ldo12 { + regulator-name = "pm8350c_l12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pm8350c_l13: ldo13 { + regulator-name = "pm8350c_l13"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; + + /* pm8350b has one regulator here; unused for now */ + + regulators-2 { + compatible = "qcom,pmr735a-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + + vdd-l1-l2-supply = <&pmr735a_s2>; + vdd-l3-supply = <&pmr735a_s1>; + vdd-l4-supply = <&pm8350c_s1>; + vdd-l5-l6-supply = <&pm8350c_s1>; + vdd-l7-bob-supply = <&vreg_bob>; + + pmr735a_s1: smps1 { + regulator-name = "pmr735a_s1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1280000>; + }; + + pmr735a_s2: smps2 { + regulator-name = "pmr735a_s2"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <976000>; + }; + + pmr735a_s3: smps3 { + regulator-name = "pmr735a_s3"; + regulator-min-microvolt = <2208000>; + regulator-max-microvolt = <2352000>; + }; + + pmr735a_l1: ldo1 { + regulator-name = "pmr735a_l1"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + }; + + pmr735a_l2: ldo2 { + regulator-name = "pmr735a_l2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l3: ldo3 { + regulator-name = "pmr735a_l3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pmr735a_l4: ldo4 { + regulator-name = "pmr735a_l4"; + regulator-min-microvolt = <1776000>; + regulator-max-microvolt = <1872000>; + }; + + pmr735a_l5: ldo5 { + regulator-name = "pmr735a_l5"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + pmr735a_l6: ldo6 { + regulator-name = "pmr735a_l6"; + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <904000>; + }; + + pmr735a_l7: ldo7 { + regulator-name = "pmr735a_l7"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; + +&cdsp { + firmware-name = "qcom/sm8350/lemonade/cdsp.mbn"; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + status = "okay"; + + bq27541: fuel-gauge@55 { + compatible = "ti,bq27541"; + reg = <0x55>; + monitored-battery = <&bat>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + status = "okay"; + + /* Touchscreens: Syna TCM oncell or Samsung s6sy761 */ +}; + +&i2c13 { + clock-frequency = <100000>; + status = "okay"; + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; + + vcc-supply = <&vreg_bob>; + mode-switch; + orientation-switch; + + port { + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + }; + + /* Qualcomm PM8008i/PM8008j @ 8, 9, c, d */ +}; + +&i2c15 { + clock-frequency = <400000>; + status = "okay"; + + /* sn-nci NFC controller @ 28 */ +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpi_dma2 { + status = "okay"; +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&pil_ipa_fw_mem>; + firmware-name = "qcom/sm8350/lemonade/ipa_fws.mbn"; + status = "okay"; +}; + +&mpss { + firmware-name = "qcom/sm8350/lemonade/modem.mbn"; + status = "okay"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&pm8350_l5>; + vdda-pll-supply = <&pm8350_l6>; + + status = "okay"; +}; + +&pm8350_gpios { + gpio1_adc_default: gpio1-adc-default-state { + pins = "gpio1"; + function = "normal"; + bias-high-impedance; + bias-disable; + }; + + gpio3_adc_default: gpio3-adc-default-state { + pins = "gpio3"; + function = "normal"; + bias-high-impedance; + bias-disable; + }; +}; + +&pm8350_gpios { + vol_down_n: vol-down-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + bias-pull-up; + input-enable; + }; +}; + +&pmk8350_adc_tm { + status = "okay"; + + pm8350-msm-therm@0 { + reg = <0>; + io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pm8350-cam-flash-therm@1 { + reg = <1>; + io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pm8350-hot-pocket-therm@2 { + reg = <2>; + io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pm8350-wide-rfc-therm@3 { + reg = <3>; + io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pm8350-rear-tof-therm@4 { + reg = <4>; + io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM5_100K_PU(1)>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pm8350b-usb-conn-therm@5 { + reg = <5>; + io-channels = <&pmk8350_vadc PM8350B_ADC7_AMUX_THM4_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + pm8350b-wl-chg-therm@6 { + reg = <6>; + io-channels = <&pmk8350_vadc PM8350B_ADC7_GPIO2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pmk8350_rtc { + status = "okay"; +}; + +&pmk8350_vadc { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_adc_default>, <&gpio3_adc_default>; + + /* pmk8350-ref-gnd */ + channel@0 { + reg = <0x00>; + qcom,pre-scaling = <1 1>; + label = "pmk8350_ref_gnd"; + }; + + /* pmk8350-vref-1p25 */ + channel@1 { + reg = <0x01>; + qcom,pre-scaling = <1 1>; + label = "pmk8350_vref_1p25"; + }; + + /* pmk8350-die-temp */ + channel@3 { + reg = <0x03>; + qcom,pre-scaling = <1 1>; + label = "pmk8350_die_temp"; + }; + + /* pm8350-ref-gnd */ + channel@100 { + reg = <0x100>; + qcom,pre-scaling = <1 1>; + label = "pm8350_ref_gnd"; + }; + + /*pm8350-vref-1p25*/ + channel@101 { + reg = <0x101>; + qcom,pre-scaling = <1 1>; + label = "pm8350_vref_1p25"; + }; + + /* pm8350-die-temp */ + channel@103 { + reg = <0x103>; + qcom,pre-scaling = <1 1>; + label = "pm8350_die_temp"; + }; + + /* gpio1-v */ + channel@128 { + reg = <0x128>; + qcom,ratiometric; + qcom,hw-settle-time = <700>; + qcom,pre-scaling = <1 1>; + label = "gpio1_v"; + }; + + /* gpio3-v */ + channel@12b { + reg = <0x12b>; + qcom,ratiometric; + qcom,hw-settle-time = <700>; + qcom,pre-scaling = <1 1>; + label = "gpio3_v"; + }; + + /* pm8350-msm-therm */ + channel@144 { + reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm8350_msm_therm"; + }; + + /* pm8350-cam-flash-therm */ + channel@145 { + reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm8350_cam_flash_therm"; + }; + + /* pm8350-hot-pocket-therm */ + channel@146 { + reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm8350_hot_pocket_therm"; + }; + + /* pm8350-wide-rfc-therm */ + channel@147 { + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm8350_wide_rfc_therm"; + }; + + /* pm8350-rear-tof-therm */ + channel@148 { + reg = <PM8350_ADC7_AMUX_THM5_100K_PU(1)>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm8350_rear_tof_therm"; + }; + + /* pm8350-vph-pwr */ + channel@18e { + reg = <0x18e>; + qcom,pre-scaling = <1 3>; + label = "pm8350_vph_pwr"; + }; + + /* pm8350b-ref-gnd */ + channel@300 { + reg = <0x300>; + qcom,pre-scaling = <1 1>; + label = "pm8350b_ref_gnd"; + }; + + /* pm8350b-vref-1p25 */ + channel@301 { + reg = <0x301>; + qcom,pre-scaling = <1 1>; + label = "pm8350b_vref_1p25"; + }; + + /* pm8350b-die-temp */ + channel@303 { + reg = <0x303>; + qcom,pre-scaling = <1 1>; + label = "pm8350b_die_temp"; + }; + + /* pm8350b-chg-temp */ + channel@310 { + reg = <PM8350B_ADC7_CHG_TEMP>; + qcom,pre-scaling = <1 1>; + label = "pm8350b_chg_temp"; + }; + + /* pm8350b-usb-conn-therm */ + channel@347 { + reg = <PM8350B_ADC7_AMUX_THM4_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm8350b_usb_conn_therm"; + }; + + /* pm8350b-wl-chg-therm */ + channel@34b { + reg = <PM8350B_ADC7_GPIO2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm8350b_wl_chg_therm"; + }; + + /* pm8350b-vph-pwr */ + channel@38e { + reg = <0x38e>; + qcom,pre-scaling = <1 3>; + label = "pm8350b_vph_pwr"; + }; + + /* pm8350b-vbat-sns */ + channel@38f { + reg = <0x38f>; + qcom,pre-scaling = <1 3>; + label = "pm8350b_vbat_sns"; + }; + + /* pmr735a-ref-gnd */ + channel@400 { + reg = <0x400>; + qcom,pre-scaling = <1 1>; + label = "pmr735a_ref_gnd"; + }; + + /* pmr735a-vref-1p25 */ + channel@401 { + reg = <0x401>; + qcom,pre-scaling = <1 1>; + label = "pmr735a_vref_1p25"; + }; + + /* pmr735a-die-temp */ + channel@403 { + reg = <0x403>; + qcom,pre-scaling = <1 1>; + label = "pmr735a_die_temp"; + }; + + /* pmr735b-ref-gnd */ + channel@500 { + reg = <0x500>; + qcom,pre-scaling = <1 1>; + label = "pmr735b_ref_gnd"; + }; + + /* pmr735b-vref-1p25 */ + channel@501 { + reg = <0x501>; + qcom,pre-scaling = <1 1>; + label = "pmr735b_vref_1p25"; + }; + + /* pmr735b-die-temp */ + channel@503 { + reg = <0x503>; + qcom,pre-scaling = <1 1>; + label = "pmr735b_die_temp"; + }; + + /* smb139x-1-smb-temp */ + channel@b06 { + reg = <SMB139x_1_ADC7_SMB_TEMP>; + qcom,pre-scaling = <1 1>; + label = "smb139x_1_smb_temp"; + }; + + /* smb139x-2-smb-temp */ + channel@c06 { + reg = <SMB139x_2_ADC7_SMB_TEMP>; + qcom,pre-scaling = <1 1>; + label = "smb139x_2_smb_temp"; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEUP>; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&reserved_memory { + bootloader-log@9fff7000 { + reg = <0 0x9fff7000 0 0x8000>; + }; + + framebuffer@e1000000 { + reg = <0 0xe4d00000 0 0x2400000>; + no-map; + }; + + ramoops: ramoops@E9700000 { + compatible = "ramoops"; + reg = <0 0xe9700000 0 0x5b8000>; + record-size = <0x40000>; + console-size = <0x40000>; + ftrace-size = <0x200000>; + pmsg-size = <0x200000>; + ecc-size = <0>; + }; + + reserved@ea700000 { + reg = <0 0xea700000 0 0x800000>; + }; +}; + +&removed_mem { + reg = <0 0xd8800000 0 0x8e00000>; +}; + +&slpi { + firmware-name = "qcom/sm8350/lemonade/slpi.mbn"; + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <52 8>; + + pcie0_default_state: pcie0-default-state { + perst-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio95"; + function = "pcie0_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sleep-pins { + pins = "gpio95"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst-pins { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio98"; + function = "pcie1_clkreqn"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + /* wil6210_refclk_en_pin lives here also */ + }; + }; + + /* Modem-related pin common on both devices */ + rf_cable_ant0_active: rf-cable-ant0-active-state { + pins = "gpio165"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + tp_rst_active: tp-rst-active-state { + pins = "gpio22"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + /* tp_rst_suspend pinctrl is different per device, don't specify here */ + + tp_irq_active: tp-irq-active-state { + pins = "gpio23"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + tp_irq_suspend: tp-irq-suspend-state { + pins = "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 203 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8350_l7>; + vcc-max-microamp = <800000>; + vccq-supply = <&pm8350_l9>; + vccq-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&pm8350_l5>; + vdda-pll-supply = <&pm8350_l6>; + + status = "okay"; +}; + +&usb_1 { + /* + * Bug in interconnect driver breaks USB; RPMh is unable to power on + * USB regulators without this. + */ + /delete-property/ interconnects; + /delete-property/ interconnect-names; + + /* USB3 seems broken (though it's enabled downstream?) */ + qcom,select-utmi-as-pipe-clk; + + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "otg"; + maximum-speed = "high-speed"; + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&pm8350_l5>; + vdda18-supply = <&pm8350c_l1>; + vdda33-supply = <&pm8350_l2>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonade.dts b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonade.dts new file mode 100644 index 000000000000..473f10d4fcf0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonade.dts @@ -0,0 +1,85 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Igalia S.L. + * Authors: + * Nia Espera <nespera@igalia.com> + */ + +/dts-v1/; + +#include "sm8350-oneplus-common.dtsi" + +/ { + compatible = "oneplus,lemonade", "qcom,sm8350"; + model = "OnePlus 9"; +}; + +&i2c4 { + touchscreen@48 { + compatible = "samsung,s6sy761"; + reg = <0x48>; + interrupts-extended = <&tlmm 23 IRQ_TYPE_LEVEL_LOW>; + + avdd-supply = <&pm8350c_l13>; + vdd-supply = <&pm8350c_l8>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&tp_rst_active>, <&tp_irq_active>, <&tp_enable_2v8>; + pinctrl-1 = <&tp_rst_suspend>, <&tp_irq_suspend>; + }; +}; + +&mpss { + pinctrl-names = "default"; + pinctrl-0 = <&rf_cable_ant0_active>, + <&rf_cable_ant1_active>, + <&rf_cable_ant2_active>, + <&rf_cable_ant3_active>, + <&rf_cable_ant7_active>; +}; + +&tlmm { + /* Modem antenna pins exclusive to lemonade */ + rf_cable_ant1_active: rf-cable-ant1-active-state { + pins = "gpio27"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + rf_cable_ant2_active: rf-cable-ant2-active-state { + pins = "gpio92"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + rf_cable_ant3_active: rf-cable-ant3-active-state { + pins = "gpio44"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + rf_cable_ant7_active: rf-cable-ant7-active-state { + pins = "gpio155"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + tp_rst_suspend: tp-rst-suspend-state { + pins = "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + tp_enable_2v8: tp-enable-2v8-state { + pins = "gpio74"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + output-high; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonadep.dts b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonadep.dts new file mode 100644 index 000000000000..bc7e5654bd3d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8350-oneplus-lemonadep.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Igalia S.L. + * Authors: + * Nia Espera <nespera@igalia.com> + */ + +/dts-v1/; + +#include "sm8350-oneplus-common.dtsi" + +/ { + compatible = "oneplus,lemonadep", "qcom,sm8350"; + model = "OnePlus 9 Pro"; +}; + +&mpss { + pinctrl-names = "default"; + pinctrl-0 = <&rf_cable_ant0_active>; +};