diff mbox series

[v9,10/10] PCI: dwc: ep: Add Kernel-doc comments for APIs

Message ID 20240304-pci-dbi-rework-v9-10-29d433d99cda@linaro.org
State New
Headers show
Series PCI: dwc: ep: Fix DBI access failure for drivers requiring refclk from host | expand

Commit Message

Manivannan Sadhasivam March 4, 2024, 9:22 a.m. UTC
All of the APIs are missing the Kernel-doc comments. Hence, add them.

Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/controller/dwc/pcie-designware-ep.c | 94 +++++++++++++++++++++++++
 1 file changed, 94 insertions(+)

Comments

Manivannan Sadhasivam March 8, 2024, 5:43 a.m. UTC | #1
On Thu, Mar 07, 2024 at 10:58:12PM +0100, Niklas Cassel wrote:
> On Mon, Mar 04, 2024 at 02:52:22PM +0530, Manivannan Sadhasivam wrote:
> > All of the APIs are missing the Kernel-doc comments. Hence, add them.
> > 
> > Reviewed-by: Frank Li <Frank.Li@nxp.com>
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> 
> For the functions that you added in this series, e.g.
> dw_pcie_ep_cleanup(), dw_pcie_ep_init_non_sticky_registers(),
> and dw_pcie_ep_linkdown(), I think that it would have been
> better if you actually added the kdoc in the same commit that
> added the respective function.
> 
> 
> For the existing functions that did not have a kdoc, I think
> it would have been better if you fixed this as patch 1/10 in
> this series. (Or 2/10, in case you keep the Fixes tag for the
> "PCI: dwc: ep: Fix DBI access failure for drivers requiring
> refclk from host" patch.)
> 
> Yes, I know that you rename some of these functions that
> lacked kdoc later in the series, but the whole kdoc description
> would be the same, the kdoc parameters would be the same, and the
> kdoc return value would be the same.
> 
> If you later rename a function, you would only need to change
> the kdoc function name (in addition to the function declaration
> itself).
> 

Makes sense! Will change it.

- Mani
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index fed4c2936c78..1f33f2929c2b 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -14,6 +14,11 @@ 
 #include <linux/pci-epc.h>
 #include <linux/pci-epf.h>
 
+/**
+ * dw_pcie_ep_init_notify - Notify EPF drivers about EPC initialization
+ *			    complete
+ * @ep: DWC EP device
+ */
 void dw_pcie_ep_init_notify(struct dw_pcie_ep *ep)
 {
 	struct pci_epc *epc = ep->epc;
@@ -22,6 +27,14 @@  void dw_pcie_ep_init_notify(struct dw_pcie_ep *ep)
 }
 EXPORT_SYMBOL_GPL(dw_pcie_ep_init_notify);
 
+/**
+ * dw_pcie_ep_get_func_from_ep - Get the struct dw_pcie_ep_func corresponding to
+ *				 the endpoint function
+ * @ep: DWC EP device
+ * @func_no: Function number of the endpoint device
+ *
+ * Return: struct dw_pcie_ep_func if success, NULL otherwise.
+ */
 struct dw_pcie_ep_func *
 dw_pcie_ep_get_func_from_ep(struct dw_pcie_ep *ep, u8 func_no)
 {
@@ -52,6 +65,11 @@  static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, u8 func_no,
 	dw_pcie_dbi_ro_wr_dis(pci);
 }
 
+/**
+ * dw_pcie_ep_reset_bar - Reset endpoint BAR
+ * @pci: DWC PCI device
+ * @bar: BAR number of the endpoint
+ */
 void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar)
 {
 	u8 func_no, funcs;
@@ -431,6 +449,13 @@  static const struct pci_epc_ops epc_ops = {
 	.get_features		= dw_pcie_ep_get_features,
 };
 
+/**
+ * dw_pcie_ep_raise_intx_irq - Raise INTx IRQ to the host
+ * @ep: DWC EP device
+ * @func_no: Function number of the endpoint
+ *
+ * Return: 0 if success, errono otherwise.
+ */
 int dw_pcie_ep_raise_intx_irq(struct dw_pcie_ep *ep, u8 func_no)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
@@ -442,6 +467,14 @@  int dw_pcie_ep_raise_intx_irq(struct dw_pcie_ep *ep, u8 func_no)
 }
 EXPORT_SYMBOL_GPL(dw_pcie_ep_raise_intx_irq);
 
+/**
+ * dw_pcie_ep_raise_msi_irq - Raise MSI IRQ to the host
+ * @ep: DWC EP device
+ * @func_no: Function number of the endpoint
+ * @interrupt_num: Interrupt number to be raised
+ *
+ * Return: 0 if success, errono otherwise.
+ */
 int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
 			     u8 interrupt_num)
 {
@@ -490,6 +523,15 @@  int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
 }
 EXPORT_SYMBOL_GPL(dw_pcie_ep_raise_msi_irq);
 
+/**
+ * dw_pcie_ep_raise_msix_irq_doorbell - Raise MSIX to the host using Doorbell
+ *					method
+ * @ep: DWC EP device
+ * @func_no: Function number of the endpoint device
+ * @interrupt_num: Interrupt number to be raised
+ *
+ * Return: 0 if success, errno otherwise.
+ */
 int dw_pcie_ep_raise_msix_irq_doorbell(struct dw_pcie_ep *ep, u8 func_no,
 				       u16 interrupt_num)
 {
@@ -509,6 +551,14 @@  int dw_pcie_ep_raise_msix_irq_doorbell(struct dw_pcie_ep *ep, u8 func_no,
 	return 0;
 }
 
+/**
+ * dw_pcie_ep_raise_msix_irq - Raise MSIX to the host
+ * @ep: DWC EP device
+ * @func_no: Function number of the endpoint device
+ * @interrupt_num: Interrupt number to be raised
+ *
+ * Return: 0 if success, errno otherwise.
+ */
 int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
 			      u16 interrupt_num)
 {
@@ -556,6 +606,14 @@  int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
 	return 0;
 }
 
+/**
+ * dw_pcie_ep_cleanup - Cleanup DWC EP resources after fundamental reset
+ * @ep: DWC EP device
+ *
+ * Cleans up the DWC EP specific resources like eDMA etc... after fundamental
+ * reset like PERST#. Note that this API is only applicable for drivers
+ * supporting PERST# or any other methods of fundamental reset.
+ */
 void dw_pcie_ep_cleanup(struct dw_pcie_ep *ep)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
@@ -564,6 +622,13 @@  void dw_pcie_ep_cleanup(struct dw_pcie_ep *ep)
 }
 EXPORT_SYMBOL_GPL(dw_pcie_ep_cleanup);
 
+/**
+ * dw_pcie_ep_deinit - Deinitialize the endpoint device
+ * @ep: DWC EP device
+ *
+ * Deinitialize the endpoint device. EPC device is not destroyed since that will
+ * taken care by Devres.
+ */
 void dw_pcie_ep_deinit(struct dw_pcie_ep *ep)
 {
 	struct pci_epc *epc = ep->epc;
@@ -635,6 +700,14 @@  static void dw_pcie_ep_init_non_sticky_registers(struct dw_pcie *pci)
 	dw_pcie_dbi_ro_wr_dis(pci);
 }
 
+/**
+ * dw_pcie_ep_init_registers - Initialize DWC EP specific registers
+ * @ep: DWC EP device
+ *
+ * Initialize the registers (CSRs) specific to DWC EP. This API should be called
+ * only when the endpoint receives an active refclk (either from host or
+ * generated locally).
+ */
 int dw_pcie_ep_init_registers(struct dw_pcie_ep *ep)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
@@ -718,6 +791,10 @@  int dw_pcie_ep_init_registers(struct dw_pcie_ep *ep)
 }
 EXPORT_SYMBOL_GPL(dw_pcie_ep_init_registers);
 
+/**
+ * dw_pcie_ep_linkup - Notify EPF drivers about link up event
+ * @ep: DWC EP device
+ */
 void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
 {
 	struct pci_epc *epc = ep->epc;
@@ -726,6 +803,14 @@  void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
 }
 EXPORT_SYMBOL_GPL(dw_pcie_ep_linkup);
 
+/**
+ * dw_pcie_ep_linkdown - Notify EPF drivers about link down event
+ * @ep: DWC EP device
+ *
+ * Non-sticky registers are also initialized before sending the notification to
+ * the EPF drivers. This is needed since the registers need to be initialized
+ * before the link comes back again.
+ */
 void dw_pcie_ep_linkdown(struct dw_pcie_ep *ep)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
@@ -743,6 +828,15 @@  void dw_pcie_ep_linkdown(struct dw_pcie_ep *ep)
 }
 EXPORT_SYMBOL_GPL(dw_pcie_ep_linkdown);
 
+/**
+ * dw_pcie_ep_init - Initialize the endpoint device
+ * @ep: DWC EP device
+ *
+ * Initialize the endpoint device. Allocate resources and create the EPC
+ * device with the endpoint framework.
+ *
+ * Return: 0 if success, errno otherwise.
+ */
 int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 {
 	int ret;