diff mbox series

[3/3] ARM: dts: qcom: Add Sony Xperia Z3 smartphone

Message ID 20240310-shinano-common-v1-3-d64cd322ebca@z3ntu.xyz
State New
Headers show
Series Split sony-castor into shinano-common and add Sony Xperia Z3 | expand

Commit Message

Luca Weiss March 10, 2024, 11:41 a.m. UTC 
Add the dts for the Xperia Z3 smartphone which is based on Sony's
shinano platform, so at the moment there's little device-specific dts to
add on top of the common parts.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 .../qcom-msm8974pro-sony-xperia-shinano-leo.dts    | 44 ++++++++++++++++++++++
 1 file changed, 44 insertions(+)

Comments

Konrad Dybcio March 12, 2024, 2:53 p.m. UTC | #1 
On 3/10/24 12:41, Luca Weiss wrote:
> Add the dts for the Xperia Z3 smartphone which is based on Sony's
> shinano platform, so at the moment there's little device-specific dts to
> add on top of the common parts.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---

modulo missing makfile, this looks good
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts
new file mode 100644
index 000000000000..1ed6e1cc21d5
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts
@@ -0,0 +1,44 @@ 
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi"
+
+/ {
+	model = "Sony Xperia Z3";
+	compatible = "sony,xperia-leo", "qcom,msm8974pro", "qcom,msm8974";
+	chassis-type = "handset";
+
+	gpio-keys {
+		key-camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+		};
+
+		key-camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+			debounce-interval = <15>;
+		};
+	};
+};
+
+&gpio_keys_pin_a {
+	pins = "gpio2", "gpio3", "gpio4", "gpio5";
+};
+
+&smbb {
+	usb-charge-current-limit = <1500000>;
+	qcom,fast-charge-safe-current = <3000000>;
+	qcom,fast-charge-current-limit = <2150000>;
+	qcom,fast-charge-safe-voltage = <4400000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,auto-recharge-threshold-voltage = <4280000>;
+	qcom,minimum-input-voltage = <4200000>;
+
+	status = "okay";
+};
+
+&synaptics_touchscreen {
+	vio-supply = <&pm8941_s3>;
+};