diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
index 6af99116c715..5b226577f9d8 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
@@ -68,7 +68,7 @@ port@0 {
 					reg = <0>;
 
 					pmic_glink_con0_hs: endpoint {
-						remote-endpoint = <&usb_prim_role_switch>;
+						remote-endpoint = <&usb_prim_dwc3_hs>;
 					};
 				};
 
@@ -103,7 +103,7 @@ port@0 {
 					reg = <0>;
 
 					pmic_glink_con1_hs: endpoint {
-						remote-endpoint = <&usb_sec_role_switch>;
+						remote-endpoint = <&usb_sec_dwc3_hs>;
 					};
 				};
 
@@ -582,6 +582,10 @@ &usb_prim_dwc3 {
 	dr_mode = "host";
 };
 
+&usb_prim_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
 &usb_prim_qmpphy_dp_in {
 	remote-endpoint = <&mdss_dp0_out>;
 };
@@ -590,8 +594,8 @@ &usb_prim_qmpphy_out {
 	remote-endpoint = <&pmic_glink_con0_ss>;
 };
 
-&usb_prim_role_switch {
-	remote-endpoint = <&pmic_glink_con0_hs>;
+&usb_sec_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con1_hs>;
 };
 
 &usb_sec_hsphy {
@@ -619,10 +623,6 @@ &usb_sec_qmpphy_out {
 	remote-endpoint = <&pmic_glink_con1_ss>;
 };
 
-&usb_sec_role_switch {
-	remote-endpoint = <&pmic_glink_con1_hs>;
-};
-
 &usb_sec {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
index bfee60c93ccc..65d923497a05 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
@@ -71,7 +71,7 @@ port@0 {
 					reg = <0>;
 
 					pmic_glink_con0_hs: endpoint {
-						remote-endpoint = <&usb_prim_role_switch>;
+						remote-endpoint = <&usb_prim_dwc3_hs>;
 					};
 				};
 
@@ -106,7 +106,7 @@ port@0 {
 					reg = <0>;
 
 					pmic_glink_con1_hs: endpoint {
-						remote-endpoint = <&usb_sec_role_switch>;
+						remote-endpoint = <&usb_sec_dwc3_hs>;
 					};
 				};
 
@@ -648,6 +648,10 @@ &usb_prim_dwc3 {
 	dr_mode = "host";
 };
 
+&usb_prim_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con0_hs>;
+};
+
 &usb_prim_qmpphy_dp_in {
 	remote-endpoint = <&mdss_dp0_out>;
 };
@@ -656,10 +660,6 @@ &usb_prim_qmpphy_out {
 	remote-endpoint = <&pmic_glink_con0_ss>;
 };
 
-&usb_prim_role_switch {
-	remote-endpoint = <&pmic_glink_con0_hs>;
-};
-
 &usb_sec_hsphy {
 	vdda-pll-supply = <&vreg_l5e_0p88>;
 	vdda18-supply = <&vreg_l12a_1p8>;
@@ -685,10 +685,6 @@ &usb_sec_qmpphy_out {
 	remote-endpoint = <&pmic_glink_con1_ss>;
 };
 
-&usb_sec_role_switch {
-	remote-endpoint = <&pmic_glink_con1_hs>;
-};
-
 &usb_sec {
 	status = "okay";
 };
@@ -697,6 +693,10 @@ &usb_sec_dwc3 {
 	dr_mode = "host";
 };
 
+&usb_sec_dwc3_hs {
+	remote-endpoint = <&pmic_glink_con1_hs>;
+};
+
 &wifi {
 	memory-region = <&wlan_mem>;
 
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 897c0f51a612..2d2cbbff4e13 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -2547,7 +2547,9 @@ port@0 {
 				port@1 {
 					reg = <1>;
 
-					usb_prim_qmpphy_usb_ss_in: endpoint {};
+					usb_prim_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_prim_dwc3_ss>;
+					};
 				};
 
 				port@2 {
@@ -2592,7 +2594,9 @@ port@0 {
 				port@1 {
 					reg = <1>;
 
-					usb_sec_qmpphy_usb_ss_in: endpoint {};
+					usb_sec_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_sec_dwc3_ss>;
+					};
 				};
 
 				port@2 {
@@ -2672,8 +2676,23 @@ usb_prim_dwc3: usb@a600000 {
 				phys = <&usb_prim_hsphy>, <&usb_prim_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 
-				port {
-					usb_prim_role_switch: endpoint {
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_prim_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_prim_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_prim_qmpphy_usb_ss_in>;
+						};
 					};
 				};
 			};
@@ -2729,8 +2748,23 @@ usb_sec_dwc3: usb@a800000 {
 				phys = <&usb_sec_hsphy>, <&usb_sec_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 
-				port {
-					usb_sec_role_switch: endpoint {
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_sec_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_sec_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_sec_qmpphy_usb_ss_in>;
+						};
 					};
 				};
 			};
