@@ -255,6 +255,28 @@ config QCOM_Q6V5_WCSS
Hexagon V5 based WCSS remote processors on e.g. IPQ8074. This is
a non-TrustZone wireless subsystem.
+config QCOM_Q6V5_WCSS_SEC
+ tristate "Qualcomm Hexagon based WCSS Secure Peripheral Image Loader"
+ depends on OF && ARCH_QCOM
+ depends on QCOM_SMEM
+ depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
+ depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
+ depends on QCOM_SYSMON || QCOM_SYSMON=n
+ depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
+ depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
+ select QCOM_MDT_LOADER
+ select QCOM_PIL_INFO
+ select QCOM_Q6V5_COMMON
+ select QCOM_RPROC_COMMON
+ select QCOM_SCM
+ help
+ Say y here to support the Qualcomm Secure Peripheral Image Loader
+ for the Hexagon based remote processors on e.g. IPQ5332.
+
+ This is TrustZone wireless subsystem. The firmware is
+ verified and booted with the help of the Peripheral Authentication
+ System (PAS) in TrustZone.
+
config QCOM_SYSMON
tristate "Qualcomm sysmon driver"
depends on RPMSG
@@ -28,6 +28,7 @@ obj-$(CONFIG_QCOM_Q6V5_ADSP) += qcom_q6v5_adsp.o
obj-$(CONFIG_QCOM_Q6V5_MSS) += qcom_q6v5_mss.o
obj-$(CONFIG_QCOM_Q6V5_PAS) += qcom_q6v5_pas.o
obj-$(CONFIG_QCOM_Q6V5_WCSS) += qcom_q6v5_wcss.o
+obj-$(CONFIG_QCOM_Q6V5_WCSS_SEC) += qcom_q6v5_wcss_sec.o
obj-$(CONFIG_QCOM_SYSMON) += qcom_sysmon.o
obj-$(CONFIG_QCOM_WCNSS_PIL) += qcom_wcnss_pil.o
qcom_wcnss_pil-y += qcom_wcnss.o
new file mode 100644
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Linaro Ltd.
+ * Copyright (C) 2014 Sony Mobile Communications AB
+ * Copyright (c) 2012-2018, 2024 The Linux Foundation. All rights reserved.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/firmware/qcom/qcom_scm.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/soc/qcom/mdt_loader.h>
+#include <linux/soc/qcom/smem.h>
+#include <linux/soc/qcom/smem_state.h>
+#include "qcom_common.h"
+#include "qcom_q6v5.h"
+
+#include "remoteproc_internal.h"
+
+#define WCSS_CRASH_REASON 421
+
+#define WCSS_PAS_ID 0x6
+#define MPD_WCSS_PAS_ID 0xD
+
+struct wcss_sec {
+ struct device *dev;
+ struct qcom_rproc_glink glink_subdev;
+ struct qcom_rproc_ssr ssr_subdev;
+ struct qcom_q6v5 q6;
+ phys_addr_t mem_phys;
+ phys_addr_t mem_reloc;
+ void *mem_region;
+ size_t mem_size;
+ const struct wcss_data *desc;
+ const char *fw_name;
+
+ struct clk *im_sleep;
+};
+
+struct wcss_data {
+ u32 pasid;
+ const struct rproc_ops *ops;
+ bool need_auto_boot;
+ int (*init_clk)(struct wcss_sec *wcss);
+};
+
+static int wcss_sec_start(struct rproc *rproc)
+{
+ struct wcss_sec *wcss = rproc->priv;
+ struct device *dev = wcss->dev;
+ const struct wcss_data *desc = of_device_get_match_data(dev);
+ int ret;
+
+ qcom_q6v5_prepare(&wcss->q6);
+
+ ret = qcom_scm_pas_auth_and_reset(desc->pasid);
+ if (ret) {
+ dev_err(dev, "wcss_reset failed\n");
+ return ret;
+ }
+
+ ret = qcom_q6v5_wait_for_start(&wcss->q6, 5 * HZ);
+ if (ret == -ETIMEDOUT)
+ dev_err(dev, "start timed out\n");
+
+ return ret;
+}
+
+static int wcss_sec_stop(struct rproc *rproc)
+{
+ struct wcss_sec *wcss = rproc->priv;
+ struct device *dev = wcss->dev;
+ const struct wcss_data *desc = of_device_get_match_data(dev);
+ int ret;
+
+ ret = qcom_scm_pas_shutdown(desc->pasid);
+ if (ret) {
+ dev_err(dev, "not able to shutdown\n");
+ return ret;
+ }
+ qcom_q6v5_unprepare(&wcss->q6);
+
+ return 0;
+}
+
+static void *wcss_sec_da_to_va(struct rproc *rproc, u64 da, size_t len,
+ bool *is_iomem)
+{
+ struct wcss_sec *wcss = rproc->priv;
+ int offset;
+
+ offset = da - wcss->mem_reloc;
+ if (offset < 0 || offset + len > wcss->mem_size)
+ return NULL;
+
+ return wcss->mem_region + offset;
+}
+
+static int wcss_sec_load(struct rproc *rproc, const struct firmware *fw)
+{
+ struct wcss_sec *wcss = rproc->priv;
+ struct device *dev = wcss->dev;
+ const struct wcss_data *desc = of_device_get_match_data(dev);
+
+ return qcom_mdt_load(dev, fw, rproc->firmware, desc->pasid,
+ wcss->mem_region, wcss->mem_phys, wcss->mem_size,
+ &wcss->mem_reloc);
+}
+
+static unsigned long wcss_sec_panic(struct rproc *rproc)
+{
+ struct wcss_sec *wcss = rproc->priv;
+
+ return qcom_q6v5_panic(&wcss->q6);
+}
+
+static void wcss_sec_copy_segment(struct rproc *rproc,
+ struct rproc_dump_segment *segment,
+ void *dest, size_t offset, size_t size)
+{
+ struct wcss_sec *wcss = rproc->priv;
+ struct device *dev = wcss->dev;
+ void *ptr;
+
+ ptr = devm_ioremap_wc(dev, segment->da, segment->size);
+ if (!ptr) {
+ dev_err(dev, "Failed to ioremap segment %pad size %zx\n",
+ &segment->da, segment->size);
+ return;
+ }
+
+ if (size <= segment->size - offset)
+ memcpy(dest, ptr + offset, size);
+ else
+ dev_err(dev, "Copy size greater than segment size. Skipping\n");
+ devm_iounmap(dev, ptr);
+}
+
+static int wcss_sec_dump_segments(struct rproc *rproc,
+ const struct firmware *fw)
+{
+ struct device *dev = rproc->dev.parent;
+ struct reserved_mem *rmem = NULL;
+ struct device_node *node;
+ int num_segs, index = 0;
+ int ret;
+
+ /* Parse through additional reserved memory regions for the rproc
+ * and add them to the coredump segments
+ */
+ num_segs = of_count_phandle_with_args(dev->of_node,
+ "memory-region", NULL);
+ while (index < num_segs) {
+ node = of_parse_phandle(dev->of_node,
+ "memory-region", index);
+ if (!node)
+ return -EINVAL;
+
+ rmem = of_reserved_mem_lookup(node);
+ if (!rmem) {
+ dev_err(dev, "unable to acquire memory-region index %d num_segs %d\n",
+ index, num_segs);
+ return -EINVAL;
+ }
+
+ of_node_put(node);
+
+ dev_dbg(dev, "Adding segment 0x%pa size 0x%pa",
+ &rmem->base, &rmem->size);
+ ret = rproc_coredump_add_custom_segment(rproc,
+ rmem->base,
+ rmem->size,
+ wcss_sec_copy_segment,
+ NULL);
+ if (ret)
+ return ret;
+
+ index++;
+ }
+
+ return 0;
+}
+
+static const struct rproc_ops wcss_sec_ops = {
+ .start = wcss_sec_start,
+ .stop = wcss_sec_stop,
+ .da_to_va = wcss_sec_da_to_va,
+ .load = wcss_sec_load,
+ .get_boot_addr = rproc_elf_get_boot_addr,
+ .panic = wcss_sec_panic,
+ .parse_fw = wcss_sec_dump_segments,
+};
+
+static int wcss_sec_alloc_memory_region(struct wcss_sec *wcss)
+{
+ struct reserved_mem *rmem = NULL;
+ struct device_node *node;
+ struct device *dev = wcss->dev;
+
+ node = of_parse_phandle(dev->of_node, "memory-region", 0);
+ if (node) {
+ rmem = of_reserved_mem_lookup(node);
+ } else {
+ dev_err(dev, "can't find phandle memory-region\n");
+ return -EINVAL;
+ }
+
+ of_node_put(node);
+
+ if (!rmem) {
+ dev_err(dev, "unable to acquire memory-region\n");
+ return -EINVAL;
+ }
+
+ wcss->mem_phys = rmem->base;
+ wcss->mem_reloc = rmem->base;
+ wcss->mem_size = rmem->size;
+ wcss->mem_region = devm_ioremap_wc(dev, wcss->mem_phys, wcss->mem_size);
+ if (!wcss->mem_region) {
+ dev_err(dev, "unable to map memory region: %pa+%pa\n",
+ &rmem->base, &rmem->size);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int wcss_sec_probe(struct platform_device *pdev)
+{
+ struct wcss_sec *wcss;
+ struct rproc *rproc;
+ const char *fw_name = NULL;
+ const struct wcss_data *desc = of_device_get_match_data(&pdev->dev);
+ int ret;
+
+ if (!desc)
+ return -EINVAL;
+
+ ret = of_property_read_string(pdev->dev.of_node, "firmware-name",
+ &fw_name);
+ if (ret < 0)
+ return ret;
+
+ rproc = rproc_alloc(&pdev->dev, pdev->name, desc->ops, fw_name,
+ sizeof(*wcss));
+ if (!rproc) {
+ dev_err(&pdev->dev, "failed to allocate rproc\n");
+ return -ENOMEM;
+ }
+
+ wcss = rproc->priv;
+ wcss->dev = &pdev->dev;
+ wcss->desc = desc;
+ wcss->fw_name = fw_name;
+
+ ret = wcss_sec_alloc_memory_region(wcss);
+ if (ret)
+ goto free_rproc;
+
+ if (desc->init_clk) {
+ ret = desc->init_clk(wcss);
+ if (ret)
+ goto free_rproc;
+ }
+
+ ret = qcom_q6v5_init(&wcss->q6, pdev, rproc,
+ WCSS_CRASH_REASON, NULL, NULL);
+ if (ret)
+ goto free_rproc;
+
+ qcom_add_glink_subdev(rproc, &wcss->glink_subdev, "q6wcss");
+ qcom_add_ssr_subdev(rproc, &wcss->ssr_subdev, pdev->name);
+
+ rproc->auto_boot = desc->need_auto_boot;
+ rproc->dump_conf = RPROC_COREDUMP_INLINE;
+ rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE);
+
+ ret = rproc_add(rproc);
+ if (ret)
+ goto free_rproc;
+
+ platform_set_drvdata(pdev, rproc);
+
+ return 0;
+
+free_rproc:
+ rproc_free(rproc);
+
+ return ret;
+}
+
+static void wcss_sec_remove(struct platform_device *pdev)
+{
+ struct rproc *rproc = platform_get_drvdata(pdev);
+ struct wcss_sec *wcss = rproc->priv;
+
+ qcom_q6v5_deinit(&wcss->q6);
+
+ rproc_del(rproc);
+ rproc_free(rproc);
+}
+
+static int wcss_sec_ipq5332_init_clk(struct wcss_sec *wcss)
+{
+ int ret;
+ struct device *dev = wcss->dev;
+
+ wcss->im_sleep = devm_clk_get(wcss->dev, "im_sleep");
+ if (IS_ERR(wcss->im_sleep)) {
+ ret = PTR_ERR(wcss->im_sleep);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to get im_sleep clock");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(wcss->im_sleep);
+ if (ret) {
+ dev_err(dev, "could not enable im_sleep clk\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct wcss_data wcss_sec_ipq5332_res_init = {
+ .pasid = MPD_WCSS_PAS_ID,
+ .ops = &wcss_sec_ops,
+ .bootargs_version = 2,
+ .init_clk = wcss_sec_ipq5332_init_clk,
+};
+
+static const struct wcss_data wcss_sec_ipq9574_res_init = {
+ .pasid = WCSS_PAS_ID,
+ .ops = &wcss_sec_ops,
+};
+
+static const struct of_device_id wcss_sec_of_match[] = {
+ { .compatible = "qcom,ipq5332-wcss-sec-pil", .data = &wcss_sec_ipq5332_res_init },
+ { .compatible = "qcom,ipq9574-wcss-sec-pil", .data = &wcss_sec_ipq9574_res_init },
+ { },
+};
+MODULE_DEVICE_TABLE(of, wcss_sec_of_match);
+
+static struct platform_driver wcss_sec_driver = {
+ .probe = wcss_sec_probe,
+ .remove = wcss_sec_remove,
+ .driver = {
+ .name = "qcom-wcss-secure-pil",
+ .of_match_table = wcss_sec_of_match,
+ },
+};
+module_platform_driver(wcss_sec_driver);
+
+MODULE_DESCRIPTION("Hexagon WCSS Secure Peripheral Image Loader");
+MODULE_LICENSE("GPL");