diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index 10b28d870f08..6dfc85eda354 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -99,7 +99,15 @@ port@1 {
 					reg = <1>;
 
 					pmic_glink_ss0_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
 					};
 				};
 			};
@@ -128,7 +136,15 @@ port@1 {
 					reg = <1>;
 
 					pmic_glink_ss1_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
 					};
 				};
 			};
@@ -157,7 +173,15 @@ port@1 {
 					reg = <1>;
 
 					pmic_glink_ss2_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+						remote-endpoint = <&retimer_ss2_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss2_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss2_con_sbu_out>;
 					};
 				};
 			};
@@ -288,6 +312,134 @@ vreg_edp_3p3: regulator-edp-3p3 {
 		regulator-boot-on;
 	};
 
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pm8550ve_8_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr0_1p15_reg_en>;
+		pinctrl-names = "default";
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr0_1p8_reg_en>;
+		pinctrl-names = "default";
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&rtmr0_3p3_reg_en>;
+		pinctrl-names = "default";
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtmr1_1p15_reg_en>;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtmr1_1p8_reg_en>;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtmr1_3p3_reg_en>;
+	};
+
+	vreg_rtmr2_1p15: regulator-rtmr2-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtmr2_1p15_reg_en>;
+	};
+
+	vreg_rtmr2_1p8: regulator-rtmr2-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtmr2_1p8_reg_en>;
+	};
+
+	vreg_rtmr2_3p3: regulator-rtmr2-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtmr2_3p3_reg_en>;
+	};
+
+
+
 	vreg_nvme: regulator-nvme {
 		compatible = "regulator-fixed";
 
@@ -709,6 +861,163 @@ keyboard@3a {
 	};
 };
 
+&i2c1 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK5>;
+		clock-names = "xo";
+
+		vdd15-supply = <&vreg_rtmr2_1p15>;
+		vdd18-supply = <&vreg_rtmr2_1p8>;
+		vdd33-supply = <&vreg_rtmr2_3p3>;
+
+		reset-gpios = <&tlmm 185 GPIO_ACTIVE_HIGH>;
+
+		orientation-switch;
+		retimer-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss2_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss2_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss2_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+		clock-names = "xo";
+
+		vdd15-supply = <&vreg_rtmr0_1p15>;
+		vdd18-supply = <&vreg_rtmr0_1p8>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_HIGH>;
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+		clock-names = "xo";
+
+		vdd15-supply = <&vreg_rtmr1_1p15>;
+		vdd18-supply = <&vreg_rtmr1_1p8>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_HIGH>;
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+
+		};
+	};
+};
+
 &i2c8 {
 	clock-frequency = <400000>;
 
@@ -756,6 +1065,30 @@ &mdss {
 	status = "okay";
 };
 
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dp2 {
+	status = "okay";
+};
+
+&mdss_dp2_out {
+	data-lanes = <0 1 2 3>;
+};
+
 &mdss_dp3 {
 	compatible = "qcom,x1e80100-dp";
 	/delete-property/ #sound-dai-cells;
@@ -854,6 +1187,33 @@ &pcie6a_phy {
 	status = "okay";
 };
 
+&pm8550_gpios {
+	rtmr0_3p3_reg_en: rtmr0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "func1";
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_8_gpios {
+	rtmr0_1p15_reg_en: rtmr0-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "func1";
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_9_gpios {
+	rtmr0_1p8_reg_en: rtmr0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "func1";
+		input-disable;
+		output-enable;
+	};
+};
+
 &pmc8380_3_gpios {
 	edp_bl_en: edp-bl-en-state {
 		pins = "gpio4";
@@ -1093,6 +1453,48 @@ wake-n-pins {
 		};
 	};
 
+	rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_1p8_reg_en: rtmr1-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_3p3_reg_en: rtmr1-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr2_1p15_reg_en: rtmr2-1p15-reg-en-state {
+		pins = "gpio189";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr2_1p8_reg_en: rtmr2-1p8-reg-en-state {
+		pins = "gpio126";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr2_3p3_reg_en: rtmr2-3p3-reg-en-state {
+		pins = "gpio187";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	tpad_default: tpad-default-state {
 		pins = "gpio3";
 		function = "gpio";
@@ -1164,7 +1566,7 @@ &usb_1_ss0_dwc3_hs {
 };
 
 &usb_1_ss0_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss0_ss_in>;
+	remote-endpoint = <&retimer_ss0_ss_in>;
 };
 
 &usb_1_ss1_hsphy {
@@ -1196,7 +1598,7 @@ &usb_1_ss1_dwc3_hs {
 };
 
 &usb_1_ss1_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss1_ss_in>;
+	remote-endpoint = <&retimer_ss1_ss_in>;
 };
 
 &usb_1_ss2_hsphy {
@@ -1228,5 +1630,5 @@ &usb_1_ss2_dwc3_hs {
 };
 
 &usb_1_ss2_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss2_ss_in>;
+	remote-endpoint = <&retimer_ss2_ss_in>;
 };
