diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 1bc935d900854ea40e7520ac5762f307c73232f2..5f1a6b4b764492486df1a2610979f56c0a37b64a 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -36,58 +36,58 @@ cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
 			reg = <0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc0>;
 			qcom,saw = <&saw0>;
-			cpu-idle-states = <&CPU_SPC>;
+			cpu-idle-states = <&cpu_spc>;
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
 			reg = <1>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc1>;
 			qcom,saw = <&saw1>;
-			cpu-idle-states = <&CPU_SPC>;
+			cpu-idle-states = <&cpu_spc>;
 		};
 
-		CPU2: cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
 			reg = <2>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc2>;
 			qcom,saw = <&saw2>;
-			cpu-idle-states = <&CPU_SPC>;
+			cpu-idle-states = <&cpu_spc>;
 		};
 
-		CPU3: cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
 			reg = <3>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc3>;
 			qcom,saw = <&saw3>;
-			cpu-idle-states = <&CPU_SPC>;
+			cpu-idle-states = <&cpu_spc>;
 		};
 
-		L2: l2-cache {
+		l2: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
 		};
 
 		idle-states {
-			CPU_SPC: cpu-spc {
+			cpu_spc: cpu-spc {
 				compatible = "qcom,idle-state-spc",
 						"arm,idle-state";
 				entry-latency-us = <400>;
@@ -1625,7 +1625,7 @@ etm@1a1c000 {
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
 
-			cpu = <&CPU0>;
+			cpu = <&cpu0>;
 
 			out-ports {
 				port {
@@ -1643,7 +1643,7 @@ etm@1a1d000 {
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
 
-			cpu = <&CPU1>;
+			cpu = <&cpu1>;
 
 			out-ports {
 				port {
@@ -1661,7 +1661,7 @@ etm@1a1e000 {
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
 
-			cpu = <&CPU2>;
+			cpu = <&cpu2>;
 
 			out-ports {
 				port {
@@ -1679,7 +1679,7 @@ etm@1a1f000 {
 			clocks = <&rpmcc RPM_QDSS_CLK>;
 			clock-names = "apb_pclk";
 
-			cpu = <&CPU3>;
+			cpu = <&cpu3>;
 
 			out-ports {
 				port {
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi
index 40dbbf8655f09ff3c6259c69bdd08b2fe3c39594..cee0694ef127b5e2450e274659c403e0be81f401 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi
@@ -32,10 +32,10 @@ cpu@0 {
 			compatible = "qcom,krait";
 			reg = <0>;
 			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc0>;
 			qcom,saw = <&saw0>;
-			cpu-idle-states = <&CPU_SPC>;
+			cpu-idle-states = <&cpu_spc>;
 		};
 
 		cpu@1 {
@@ -43,10 +43,10 @@ cpu@1 {
 			compatible = "qcom,krait";
 			reg = <1>;
 			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc1>;
 			qcom,saw = <&saw1>;
-			cpu-idle-states = <&CPU_SPC>;
+			cpu-idle-states = <&cpu_spc>;
 		};
 
 		cpu@2 {
@@ -54,10 +54,10 @@ cpu@2 {
 			compatible = "qcom,krait";
 			reg = <2>;
 			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc2>;
 			qcom,saw = <&saw2>;
-			cpu-idle-states = <&CPU_SPC>;
+			cpu-idle-states = <&cpu_spc>;
 		};
 
 		cpu@3 {
@@ -65,13 +65,13 @@ cpu@3 {
 			compatible = "qcom,krait";
 			reg = <3>;
 			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc3>;
 			qcom,saw = <&saw3>;
-			cpu-idle-states = <&CPU_SPC>;
+			cpu-idle-states = <&cpu_spc>;
 		};
 
-		L2: l2-cache {
+		l2: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
@@ -79,7 +79,7 @@ L2: l2-cache {
 		};
 
 		idle-states {
-			CPU_SPC: cpu-spc {
+			cpu_spc: cpu-spc {
 				compatible = "qcom,idle-state-spc",
 						"arm,idle-state";
 				entry-latency-us = <150>;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index 56415ab34083f38f0f5c6aefa873947409c8cc6a..06b20c196faf3fe35983d7ee2abebd2066f83b02 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -47,7 +47,7 @@ cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc0>;
 			qcom,saw = <&saw0>;
 			reg = <0x0>;
@@ -61,7 +61,7 @@ cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc1>;
 			qcom,saw = <&saw1>;
 			reg = <0x1>;
@@ -75,7 +75,7 @@ cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc2>;
 			qcom,saw = <&saw2>;
 			reg = <0x2>;
@@ -89,7 +89,7 @@ cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			enable-method = "qcom,kpss-acc-v2";
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc3>;
 			qcom,saw = <&saw3>;
 			reg = <0x3>;
@@ -99,7 +99,7 @@ cpu@3 {
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
-		L2: l2-cache {
+		l2: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index 0f02f59c282a25698bade3ef3cac3082bd056b3c..96e97350153506922b7560131e33664d51e891b5 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -27,7 +27,7 @@ cpu0: cpu@0 {
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
 			reg = <0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc0>;
 			qcom,saw = <&saw0>;
 		};
@@ -37,12 +37,12 @@ cpu1: cpu@1 {
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
 			reg = <1>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc1>;
 			qcom,saw = <&saw1>;
 		};
 
-		L2: l2-cache {
+		l2: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
index 573feb3218c33c449f95f4922c24400cea9ac0cc..7de8d6c550167ac37e09dc5d92b7a3b2e21753cb 100644
--- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi
@@ -30,7 +30,7 @@ cpu0: cpu@0 {
 			compatible = "arm,cortex-a5";
 			reg = <0>;
 			device_type = "cpu";
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 		};
 	};
 
@@ -61,7 +61,7 @@ soc: soc {
 		ranges;
 		compatible = "simple-bus";
 
-		L2: cache-controller@2040000 {
+		l2: cache-controller@2040000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x02040000 0x1000>;
 			arm,data-latency = <2 2 0>;
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
index 3a685ff7e8ccf505e2801607a70099f4b3c16137..64c8ac94f352e46dc4a18f902d2c30114ecd91d2 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi
@@ -39,12 +39,12 @@ cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a7";
 			enable-method = "qcom,msm8226-smp";
 			device_type = "cpu";
 			reg = <0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			clocks = <&apcs>;
 			operating-points-v2 = <&cpu_opp_table>;
 			qcom,acc = <&acc0>;
@@ -52,12 +52,12 @@ CPU0: cpu@0 {
 			#cooling-cells = <2>;
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			enable-method = "qcom,msm8226-smp";
 			device_type = "cpu";
 			reg = <1>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			clocks = <&apcs>;
 			operating-points-v2 = <&cpu_opp_table>;
 			qcom,acc = <&acc1>;
@@ -65,12 +65,12 @@ CPU1: cpu@1 {
 			#cooling-cells = <2>;
 		};
 
-		CPU2: cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a7";
 			enable-method = "qcom,msm8226-smp";
 			device_type = "cpu";
 			reg = <2>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			clocks = <&apcs>;
 			operating-points-v2 = <&cpu_opp_table>;
 			qcom,acc = <&acc2>;
@@ -78,12 +78,12 @@ CPU2: cpu@2 {
 			#cooling-cells = <2>;
 		};
 
-		CPU3: cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a7";
 			enable-method = "qcom,msm8226-smp";
 			device_type = "cpu";
 			reg = <3>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			clocks = <&apcs>;
 			operating-points-v2 = <&cpu_opp_table>;
 			qcom,acc = <&acc3>;
@@ -91,7 +91,7 @@ CPU3: cpu@3 {
 			#cooling-cells = <2>;
 		};
 
-		L2: l2-cache {
+		l2: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
@@ -1264,10 +1264,10 @@ cpu0-thermal {
 			cooling-maps {
 				map0 {
 					trip = <&cpu_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 
@@ -1295,10 +1295,10 @@ cpu1-thermal {
 			cooling-maps {
 				map0 {
 					trip = <&cpu_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
index a66c474cd1aa0d4303dbb1fdaa97072c1f45a7b2..3f69b98d0041eb16093668d6b83a2da0c3496638 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi
@@ -22,7 +22,7 @@ cpu@0 {
 			enable-method = "qcom,gcc-msm8660";
 			device_type = "cpu";
 			reg = <0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu@1 {
@@ -30,10 +30,10 @@ cpu@1 {
 			enable-method = "qcom,gcc-msm8660";
 			device_type = "cpu";
 			reg = <1>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 		};
 
-		L2: l2-cache {
+		l2: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index ebc43c5c6e5f756995a5d48bdee102b0b3c47106..865fe7cc39511d7cb9ec5c4b12100404f77e2989 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -25,7 +25,7 @@ cpu@0 {
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
 			reg = <0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc0>;
 			qcom,saw = <&saw0>;
 		};
@@ -35,12 +35,12 @@ cpu@1 {
 			enable-method = "qcom,kpss-acc-v1";
 			device_type = "cpu";
 			reg = <1>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc1>;
 			qcom,saw = <&saw1>;
 		};
 
-		L2: l2-cache {
+		l2: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
index 742d2104b4fe5db54fcbf8c55c6fb2e0fb12a410..e3f9c56a778cf8c64735ede1e85286bde12c1c87 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
@@ -35,51 +35,51 @@ cpus {
 		#size-cells = <0>;
 		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v2";
 			device_type = "cpu";
 			reg = <0>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc0>;
 			qcom,saw = <&saw0>;
-			cpu-idle-states = <&CPU_SPC>;
+			cpu-idle-states = <&cpu_spc>;
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v2";
 			device_type = "cpu";
 			reg = <1>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc1>;
 			qcom,saw = <&saw1>;
-			cpu-idle-states = <&CPU_SPC>;
+			cpu-idle-states = <&cpu_spc>;
 		};
 
-		CPU2: cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v2";
 			device_type = "cpu";
 			reg = <2>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc2>;
 			qcom,saw = <&saw2>;
-			cpu-idle-states = <&CPU_SPC>;
+			cpu-idle-states = <&cpu_spc>;
 		};
 
-		CPU3: cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "qcom,krait";
 			enable-method = "qcom,kpss-acc-v2";
 			device_type = "cpu";
 			reg = <3>;
-			next-level-cache = <&L2>;
+			next-level-cache = <&l2>;
 			qcom,acc = <&acc3>;
 			qcom,saw = <&saw3>;
-			cpu-idle-states = <&CPU_SPC>;
+			cpu-idle-states = <&cpu_spc>;
 		};
 
-		L2: l2-cache {
+		l2: l2-cache {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
@@ -87,7 +87,7 @@ L2: l2-cache {
 		};
 
 		idle-states {
-			CPU_SPC: cpu-spc {
+			cpu_spc: cpu-spc {
 				compatible = "qcom,idle-state-spc",
 						"arm,idle-state";
 				entry-latency-us = <150>;
@@ -960,7 +960,7 @@ etm@fc33c000 {
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			cpu = <&CPU0>;
+			cpu = <&cpu0>;
 
 			out-ports {
 				port {
@@ -978,7 +978,7 @@ etm@fc33d000 {
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			cpu = <&CPU1>;
+			cpu = <&cpu1>;
 
 			out-ports {
 				port {
@@ -996,7 +996,7 @@ etm@fc33e000 {
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			cpu = <&CPU2>;
+			cpu = <&cpu2>;
 
 			out-ports {
 				port {
@@ -1014,7 +1014,7 @@ etm@fc33f000 {
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
 			clock-names = "apb_pclk", "atclk";
 
-			cpu = <&CPU3>;
+			cpu = <&cpu3>;
 
 			out-ports {
 				port {
