diff mbox series

[v5,09/12] crypto: qce - Add LOCK and UNLOCK flag support

Message ID 20241212041639.4109039-10-quic_mdalam@quicinc.com
State New
Headers show
Series dmaengine: qcom: bam_dma: add cmd descriptor support | expand

Commit Message

Md Sadre Alam Dec. 12, 2024, 4:16 a.m. UTC 
Add LOCK and UNLOCK flag support while preapring
command descriptor for writing crypto register.

added qce_bam_acquire_lock() and qce_bam_release_lock()
which will do dummy write to a crypto register for
acquiring lock and releaseing lock.

Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
---

Change in [v5]

* No change

Change in [v4]

* Added qce_bam_acquire_lock() and qce_bam_release_lock()
  api
 
Change in [v3]

* No change

Change in [v2]

* Added initial support for LOCK/UNLOCK flag
  on command descriptor

Change in [v1]

* This patch was not included in [v1]

 drivers/crypto/qce/common.c | 35 +++++++++++++++++++++++++++++++++++
 drivers/crypto/qce/core.h   |  2 ++
 drivers/crypto/qce/dma.c    |  7 ++++++-
 drivers/crypto/qce/dma.h    |  2 ++
 4 files changed, 45 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/crypto/qce/common.c b/drivers/crypto/qce/common.c
index ff96f6ba1fc5..dad12e15905f 100644
--- a/drivers/crypto/qce/common.c
+++ b/drivers/crypto/qce/common.c
@@ -588,6 +588,41 @@  int qce_start(struct crypto_async_request *async_req, u32 type)
 #define STATUS_ERRORS	\
 		(BIT(SW_ERR_SHIFT) | BIT(AXI_ERR_SHIFT) | BIT(HSD_ERR_SHIFT))
 
+int qce_bam_acquire_lock(struct qce_device *qce)
+{
+	int ret;
+
+	qce_clear_bam_transaction(qce);
+
+	/* This is just a dummy write to acquire lock on bam pipe */
+	qce_write_reg_dma(qce, REG_AUTH_SEG_CFG, 0, 1);
+	ret = qce_submit_cmd_desc(qce, QCE_DMA_DESC_FLAG_LOCK);
+	if (ret) {
+		dev_err(qce->dev, "Error in Locking cmd descriptor\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+int qce_bam_release_lock(struct qce_device *qce)
+{
+	int ret;
+
+	qce_clear_bam_transaction(qce);
+
+	/* This just dummy write to release lock on bam pipe*/
+	qce_write_reg_dma(qce, REG_AUTH_SEG_CFG, 0, 1);
+
+	ret = qce_submit_cmd_desc(qce, QCE_DMA_DESC_FLAG_UNLOCK);
+	if (ret) {
+		dev_err(qce->dev, "Error in Un-Locking cmd descriptor\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 int qce_check_status(struct qce_device *qce, u32 *status)
 {
 	int ret = 0;
diff --git a/drivers/crypto/qce/core.h b/drivers/crypto/qce/core.h
index bf28dedd1509..d01d810b60ad 100644
--- a/drivers/crypto/qce/core.h
+++ b/drivers/crypto/qce/core.h
@@ -68,4 +68,6 @@  int qce_read_reg_dma(struct qce_device *qce, unsigned int offset, void *buff,
 void qce_clear_bam_transaction(struct qce_device *qce);
 int qce_submit_cmd_desc(struct qce_device *qce, unsigned long flags);
 struct qce_bam_transaction *qce_alloc_bam_txn(struct qce_dma_data *dma);
+int qce_bam_acquire_lock(struct qce_device *qce);
+int qce_bam_release_lock(struct qce_device *qce);
 #endif /* _CORE_H_ */
diff --git a/drivers/crypto/qce/dma.c b/drivers/crypto/qce/dma.c
index e4e672d65302..93d455d1d5b4 100644
--- a/drivers/crypto/qce/dma.c
+++ b/drivers/crypto/qce/dma.c
@@ -72,7 +72,12 @@  int qce_submit_cmd_desc(struct qce_device *qce, unsigned long flags)
 	unsigned long desc_flags;
 	int ret = 0;
 
-	desc_flags = DMA_PREP_CMD;
+	if (flags & QCE_DMA_DESC_FLAG_LOCK)
+		desc_flags = DMA_PREP_CMD | DMA_PREP_LOCK;
+	else if (flags & QCE_DMA_DESC_FLAG_UNLOCK)
+		desc_flags = DMA_PREP_CMD | DMA_PREP_UNLOCK;
+	else
+		desc_flags = DMA_PREP_CMD;
 
 	/* For command descriptor always use consumer pipe
 	 * it recomended as per HPG
diff --git a/drivers/crypto/qce/dma.h b/drivers/crypto/qce/dma.h
index f10991590b3f..ad8a18a720b1 100644
--- a/drivers/crypto/qce/dma.h
+++ b/drivers/crypto/qce/dma.h
@@ -19,6 +19,8 @@ 
 #define QCE_BAM_CMD_ELEMENT_SIZE       64
 #define QCE_DMA_DESC_FLAG_BAM_NWD      (0x0004)
 #define QCE_MAX_REG_READ               8
+#define QCE_DMA_DESC_FLAG_LOCK          (0x0002)
+#define QCE_DMA_DESC_FLAG_UNLOCK        (0x0001)
 
 struct qce_result_dump {
 	u32 auth_iv[QCE_AUTHIV_REGS_CNT];