diff mbox series

[v2,03/24] ARM: dts: qcom: msm8916: Use the header with DSI phy clock IDs

Message ID 20250408-dts-qcom-dsi-phy-clocks-v2-3-73b482a6dd02@linaro.org
State New
Headers show
Series ARM / arm64: dts: qcom: Use the header with DSI phy clock IDs | expand

Commit Message

Krzysztof Kozlowski April 8, 2025, 9:32 a.m. UTC 
Use the header with DSI phy clock IDs to make code more readable.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

Comments

Luca Weiss April 8, 2025, 10:23 a.m. UTC | #1 
On Tue Apr 8, 2025 at 11:32 AM CEST, Krzysztof Kozlowski wrote:
> Use the header with DSI phy clock IDs to make code more readable.

Hi Krzysztof,

This patch was the wrong subject, it's touching arm64, not arm32.

And thanks for sending this series, it's nice to see some magic numbers
disappear that make little sense if you don't know what it's about :)

Regards
Luca

>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/msm8916.dtsi | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index 8f35c9af18782aa1da7089988692e6588c4b7c5d..c89f9e92e832eae8f630555e9e7f5817d6731d4d 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -4,6 +4,7 @@
>   */
>  
>  #include <dt-bindings/arm/coresight-cti-dt.h>
> +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
>  #include <dt-bindings/clock/qcom,gcc-msm8916.h>
>  #include <dt-bindings/clock/qcom,rpmcc.h>
>  #include <dt-bindings/interconnect/qcom,msm8916.h>
> @@ -1497,8 +1498,8 @@ gcc: clock-controller@1800000 {
>  			reg = <0x01800000 0x80000>;
>  			clocks = <&xo_board>,
>  				 <&sleep_clk>,
> -				 <&mdss_dsi0_phy 1>,
> -				 <&mdss_dsi0_phy 0>,
> +				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
> +				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
>  				 <0>,
>  				 <0>,
>  				 <0>;
> @@ -1590,8 +1591,8 @@ mdss_dsi0: dsi@1a98000 {
>  
>  				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
>  						  <&gcc PCLK0_CLK_SRC>;
> -				assigned-clock-parents = <&mdss_dsi0_phy 0>,
> -							 <&mdss_dsi0_phy 1>;
> +				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
> +							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
>  
>  				clocks = <&gcc GCC_MDSS_MDP_CLK>,
>  					 <&gcc GCC_MDSS_AHB_CLK>,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 8f35c9af18782aa1da7089988692e6588c4b7c5d..c89f9e92e832eae8f630555e9e7f5817d6731d4d 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -4,6 +4,7 @@ 
  */
 
 #include <dt-bindings/arm/coresight-cti-dt.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-msm8916.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/interconnect/qcom,msm8916.h>
@@ -1497,8 +1498,8 @@  gcc: clock-controller@1800000 {
 			reg = <0x01800000 0x80000>;
 			clocks = <&xo_board>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
 				 <0>,
 				 <0>,
 				 <0>;
@@ -1590,8 +1591,8 @@  mdss_dsi0: dsi@1a98000 {
 
 				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
 						  <&gcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				clocks = <&gcc GCC_MDSS_MDP_CLK>,
 					 <&gcc GCC_MDSS_AHB_CLK>,