| Message ID | 20250507135331.76021-2-maxime.chevallier@bootlin.com |
|---|---|
| State | New |
| Headers | show |
| Series | Introduce an ethernet port representation | expand |
On Wed, 7 May 2025 15:53:17 +0200 Maxime Chevallier <maxime.chevallier@bootlin.com> wrote: > The ability to describe the physical ports of Ethernet devices is useful > to describe multi-port devices, as well as to remove any ambiguity with > regard to the nature of the port. > > Moreover, describing ports allows for a better description of features > that are tied to connectors, such as PoE through the PSE-PD devices. > > Introduce a binding to allow describing the ports, for now with 2 > attributes : > > - The number of lanes, which is a quite generic property that allows > differentating between multiple similar technologies such as BaseT1 > and "regular" BaseT (which usually means BaseT4). > > - The media that can be used on that port, such as BaseT for Twisted > Copper, BaseC for coax copper, BaseS/L for Fiber, BaseK for backplane > ethernet, etc. This allows defining the nature of the port, and > therefore avoids the need for vendor-specific properties such as > "micrel,fiber-mode" or "ti,fiber-mode". > > The port description lives in its own file, as it is intended in the > future to allow describing the ports for phy-less devices. > > Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> > +description: > + An Ethernet Connectr represents the output of a network component such as Connector With this typo fixed: Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -8777,6 +8777,7 @@ R: Russell King <linux@armlinux.org.uk> > L: netdev@vger.kernel.org > S: Maintained > F: Documentation/ABI/testing/sysfs-class-net-phydev > +F: Documentation/devicetree/bindings/net/ethernet-connector.yaml > F: Documentation/devicetree/bindings/net/ethernet-phy.yaml > F: Documentation/devicetree/bindings/net/mdio* > F: Documentation/devicetree/bindings/net/qca,ar803x.yaml You will need Russell acked-by for that. Regards,
diff --git a/Documentation/devicetree/bindings/net/ethernet-connector.yaml b/Documentation/devicetree/bindings/net/ethernet-connector.yaml new file mode 100644 index 000000000000..2aa28e6c1523 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ethernet-connector.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ethernet-connector.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic Ethernet Connector + +maintainers: + - Maxime Chevallier <maxime.chevallier@bootlin.com> + +description: + An Ethernet Connectr represents the output of a network component such as + a PHY, an Ethernet controller with no PHY, or an SFP module. + +properties: + + lanes: + description: + Defines the number of lanes on the port, that is the number of physical + channels used to convey the data with the link partner. + $ref: /schemas/types.yaml#/definitions/uint32 + + media: + description: + The mediums, as defined in 802.3, that can be used on the port. + items: + enum: + - BaseT + - BaseK + - BaseS + - BaseC + - BaseL + - BaseD + - BaseE + - BaseF + - BaseV + - BaseMLD + - BaseX + +required: + - lanes + - media + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index 71e2cd32580f..6bf670beb66f 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -277,6 +277,17 @@ properties: additionalProperties: false + mdi: + type: object + + patternProperties: + '^connector-[a-f0-9]+$': + $ref: /schemas/net/ethernet-connector.yaml# + + unevaluatedProperties: false + + additionalProperties: false + required: - reg @@ -313,5 +324,12 @@ examples: default-state = "keep"; }; }; + + mdi { + connector-0 { + lanes = <2>; + media = "BaseT"; + }; + }; }; }; diff --git a/MAINTAINERS b/MAINTAINERS index 5c31814c9687..b59a9209fcb1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8777,6 +8777,7 @@ R: Russell King <linux@armlinux.org.uk> L: netdev@vger.kernel.org S: Maintained F: Documentation/ABI/testing/sysfs-class-net-phydev +F: Documentation/devicetree/bindings/net/ethernet-connector.yaml F: Documentation/devicetree/bindings/net/ethernet-phy.yaml F: Documentation/devicetree/bindings/net/mdio* F: Documentation/devicetree/bindings/net/qca,ar803x.yaml
The ability to describe the physical ports of Ethernet devices is useful to describe multi-port devices, as well as to remove any ambiguity with regard to the nature of the port. Moreover, describing ports allows for a better description of features that are tied to connectors, such as PoE through the PSE-PD devices. Introduce a binding to allow describing the ports, for now with 2 attributes : - The number of lanes, which is a quite generic property that allows differentating between multiple similar technologies such as BaseT1 and "regular" BaseT (which usually means BaseT4). - The media that can be used on that port, such as BaseT for Twisted Copper, BaseC for coax copper, BaseS/L for Fiber, BaseK for backplane ethernet, etc. This allows defining the nature of the port, and therefore avoids the need for vendor-specific properties such as "micrel,fiber-mode" or "ti,fiber-mode". The port description lives in its own file, as it is intended in the future to allow describing the ports for phy-less devices. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> --- .../bindings/net/ethernet-connector.yaml | 47 +++++++++++++++++++ .../devicetree/bindings/net/ethernet-phy.yaml | 18 +++++++ MAINTAINERS | 1 + 3 files changed, 66 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/ethernet-connector.yaml