diff --git a/drivers/net/ethernet/qualcomm/ppe/ppe_config.c b/drivers/net/ethernet/qualcomm/ppe/ppe_config.c
index 6603091384ab..fe2d44ab59cb 100644
--- a/drivers/net/ethernet/qualcomm/ppe/ppe_config.c
+++ b/drivers/net/ethernet/qualcomm/ppe/ppe_config.c
@@ -16,6 +16,8 @@
 #include "ppe_config.h"
 #include "ppe_regs.h"
 
+#define PPE_QUEUE_SCH_PRI_NUM		8
+
 /**
  * struct ppe_bm_port_config - PPE BM port configuration.
  * @port_id_start: The fist BM port ID to configure.
@@ -66,6 +68,76 @@ struct ppe_qm_queue_config {
 	bool dynamic;
 };
 
+/**
+ * enum ppe_scheduler_direction - PPE scheduler direction for packet.
+ * @PPE_SCH_INGRESS: Scheduler for the packet on ingress,
+ * @PPE_SCH_EGRESS: Scheduler for the packet on egress,
+ */
+enum ppe_scheduler_direction {
+	PPE_SCH_INGRESS = 0,
+	PPE_SCH_EGRESS = 1,
+};
+
+/**
+ * struct ppe_scheduler_bm_config - PPE arbitration for buffer config.
+ * @valid: Arbitration entry valid or not.
+ * @dir: Arbitration entry for egress or ingress.
+ * @port: Port ID to use arbitration entry.
+ * @backup_port_valid: Backup port valid or not.
+ * @backup_port: Backup port ID to use.
+ *
+ * Configure the scheduler settings for accessing and releasing the PPE buffers.
+ */
+struct ppe_scheduler_bm_config {
+	bool valid;
+	enum ppe_scheduler_direction dir;
+	unsigned int port;
+	bool backup_port_valid;
+	unsigned int backup_port;
+};
+
+/**
+ * struct ppe_scheduler_qm_config - PPE arbitration for scheduler config.
+ * @ensch_port_bmp: Port bit map for enqueue scheduler.
+ * @ensch_port: Port ID to enqueue scheduler.
+ * @desch_port: Port ID to dequeue scheduler.
+ * @desch_backup_port_valid: Dequeue for the backup port valid or not.
+ * @desch_backup_port: Backup port ID to dequeue scheduler.
+ *
+ * Configure the scheduler settings for enqueuing and dequeuing packets on
+ * the PPE port.
+ */
+struct ppe_scheduler_qm_config {
+	unsigned int ensch_port_bmp;
+	unsigned int ensch_port;
+	unsigned int desch_port;
+	bool desch_backup_port_valid;
+	unsigned int desch_backup_port;
+};
+
+/**
+ * struct ppe_scheduler_port_config - PPE port scheduler config.
+ * @port: Port ID to be scheduled.
+ * @flow_level: Scheduler flow level or not.
+ * @node_id: Node ID, for level 0, queue ID is used.
+ * @loop_num: Loop number of scheduler config.
+ * @pri_max: Max priority configured.
+ * @flow_id: Strict priority ID.
+ * @drr_node_id: Node ID for scheduler.
+ *
+ * PPE port scheduler configuration which decides the priority in the
+ * packet scheduler for the egress port.
+ */
+struct ppe_scheduler_port_config {
+	unsigned int port;
+	bool flow_level;
+	unsigned int node_id;
+	unsigned int loop_num;
+	unsigned int pri_max;
+	unsigned int flow_id;
+	unsigned int drr_node_id;
+};
+
 /* There are total 2048 buffers available in PPE, out of which some
  * buffers are reserved for some specific purposes per PPE port. The
  * rest of the pool of 1550 buffers are assigned to the general 'group0'
@@ -163,6 +235,603 @@ static const struct ppe_qm_queue_config ipq9574_ppe_qm_queue_config[] = {
 	},
 };
 
+/* PPE scheduler configuration for BM includes multiple entries. Each entry
+ * indicates the primary port to be assigned the buffers for the ingress or
+ * to release the buffers for the egress. Backup port ID will be used when
+ * the primary port ID is down.
+ */
+static const struct ppe_scheduler_bm_config ipq9574_ppe_sch_bm_config[] = {
+	{true, PPE_SCH_INGRESS, 0, false, 0},
+	{true, PPE_SCH_EGRESS,  0, false, 0},
+	{true, PPE_SCH_INGRESS, 5, false, 0},
+	{true, PPE_SCH_EGRESS,  5, false, 0},
+	{true, PPE_SCH_INGRESS, 6, false, 0},
+	{true, PPE_SCH_EGRESS,  6, false, 0},
+	{true, PPE_SCH_INGRESS, 1, false, 0},
+	{true, PPE_SCH_EGRESS,  1, false, 0},
+	{true, PPE_SCH_INGRESS, 0, false, 0},
+	{true, PPE_SCH_EGRESS,  0, false, 0},
+	{true, PPE_SCH_INGRESS, 5, false, 0},
+	{true, PPE_SCH_EGRESS,  5, false, 0},
+	{true, PPE_SCH_INGRESS, 6, false, 0},
+	{true, PPE_SCH_EGRESS,  6, false, 0},
+	{true, PPE_SCH_INGRESS, 7, false, 0},
+	{true, PPE_SCH_EGRESS,  7, false, 0},
+	{true, PPE_SCH_INGRESS, 0, false, 0},
+	{true, PPE_SCH_EGRESS,  0, false, 0},
+	{true, PPE_SCH_INGRESS, 1, false, 0},
+	{true, PPE_SCH_EGRESS,  1, false, 0},
+	{true, PPE_SCH_INGRESS, 5, false, 0},
+	{true, PPE_SCH_EGRESS,  5, false, 0},
+	{true, PPE_SCH_INGRESS, 6, false, 0},
+	{true, PPE_SCH_EGRESS,  6, false, 0},
+	{true, PPE_SCH_INGRESS, 2, false, 0},
+	{true, PPE_SCH_EGRESS,  2, false, 0},
+	{true, PPE_SCH_INGRESS, 0, false, 0},
+	{true, PPE_SCH_EGRESS,  0, false, 0},
+	{true, PPE_SCH_INGRESS, 5, false, 0},
+	{true, PPE_SCH_EGRESS,  5, false, 0},
+	{true, PPE_SCH_INGRESS, 6, false, 0},
+	{true, PPE_SCH_EGRESS,  6, false, 0},
+	{true, PPE_SCH_INGRESS, 1, false, 0},
+	{true, PPE_SCH_EGRESS,  1, false, 0},
+	{true, PPE_SCH_INGRESS, 3, false, 0},
+	{true, PPE_SCH_EGRESS,  3, false, 0},
+	{true, PPE_SCH_INGRESS, 0, false, 0},
+	{true, PPE_SCH_EGRESS,  0, false, 0},
+	{true, PPE_SCH_INGRESS, 5, false, 0},
+	{true, PPE_SCH_EGRESS,  5, false, 0},
+	{true, PPE_SCH_INGRESS, 6, false, 0},
+	{true, PPE_SCH_EGRESS,  6, false, 0},
+	{true, PPE_SCH_INGRESS, 7, false, 0},
+	{true, PPE_SCH_EGRESS,  7, false, 0},
+	{true, PPE_SCH_INGRESS, 0, false, 0},
+	{true, PPE_SCH_EGRESS,  0, false, 0},
+	{true, PPE_SCH_INGRESS, 1, false, 0},
+	{true, PPE_SCH_EGRESS,  1, false, 0},
+	{true, PPE_SCH_INGRESS, 5, false, 0},
+	{true, PPE_SCH_EGRESS,  5, false, 0},
+	{true, PPE_SCH_INGRESS, 6, false, 0},
+	{true, PPE_SCH_EGRESS,  6, false, 0},
+	{true, PPE_SCH_INGRESS, 4, false, 0},
+	{true, PPE_SCH_EGRESS,  4, false, 0},
+	{true, PPE_SCH_INGRESS, 0, false, 0},
+	{true, PPE_SCH_EGRESS,  0, false, 0},
+	{true, PPE_SCH_INGRESS, 5, false, 0},
+	{true, PPE_SCH_EGRESS,  5, false, 0},
+	{true, PPE_SCH_INGRESS, 6, false, 0},
+	{true, PPE_SCH_EGRESS,  6, false, 0},
+	{true, PPE_SCH_INGRESS, 1, false, 0},
+	{true, PPE_SCH_EGRESS,  1, false, 0},
+	{true, PPE_SCH_INGRESS, 0, false, 0},
+	{true, PPE_SCH_EGRESS,  0, false, 0},
+	{true, PPE_SCH_INGRESS, 5, false, 0},
+	{true, PPE_SCH_EGRESS,  5, false, 0},
+	{true, PPE_SCH_INGRESS, 6, false, 0},
+	{true, PPE_SCH_EGRESS,  6, false, 0},
+	{true, PPE_SCH_INGRESS, 2, false, 0},
+	{true, PPE_SCH_EGRESS,  2, false, 0},
+	{true, PPE_SCH_INGRESS, 0, false, 0},
+	{true, PPE_SCH_EGRESS,  0, false, 0},
+	{true, PPE_SCH_INGRESS, 7, false, 0},
+	{true, PPE_SCH_EGRESS,  7, false, 0},
+	{true, PPE_SCH_INGRESS, 5, false, 0},
+	{true, PPE_SCH_EGRESS,  5, false, 0},
+	{true, PPE_SCH_INGRESS, 6, false, 0},
+	{true, PPE_SCH_EGRESS,  6, false, 0},
+	{true, PPE_SCH_INGRESS, 1, false, 0},
+	{true, PPE_SCH_EGRESS,  1, false, 0},
+	{true, PPE_SCH_INGRESS, 0, false, 0},
+	{true, PPE_SCH_EGRESS,  0, false, 0},
+	{true, PPE_SCH_INGRESS, 5, false, 0},
+	{true, PPE_SCH_EGRESS,  5, false, 0},
+	{true, PPE_SCH_INGRESS, 6, false, 0},
+	{true, PPE_SCH_EGRESS,  6, false, 0},
+	{true, PPE_SCH_INGRESS, 3, false, 0},
+	{true, PPE_SCH_EGRESS,  3, false, 0},
+	{true, PPE_SCH_INGRESS, 1, false, 0},
+	{true, PPE_SCH_EGRESS,  1, false, 0},
+	{true, PPE_SCH_INGRESS, 0, false, 0},
+	{true, PPE_SCH_EGRESS,  0, false, 0},
+	{true, PPE_SCH_INGRESS, 5, false, 0},
+	{true, PPE_SCH_EGRESS,  5, false, 0},
+	{true, PPE_SCH_INGRESS, 6, false, 0},
+	{true, PPE_SCH_EGRESS,  6, false, 0},
+	{true, PPE_SCH_INGRESS, 4, false, 0},
+	{true, PPE_SCH_EGRESS,  4, false, 0},
+	{true, PPE_SCH_INGRESS, 7, false, 0},
+	{true, PPE_SCH_EGRESS,  7, false, 0},
+};
+
+/* PPE scheduler configuration for QM includes multiple entries. Each entry
+ * contains ports to be dispatched for enqueueing and dequeueing. The backup
+ * port for dequeueing is supported to be used when the primary port for
+ * dequeueing is down.
+ */
+static const struct ppe_scheduler_qm_config ipq9574_ppe_sch_qm_config[] = {
+	{0x98, 6, 0, true, 1},
+	{0x94, 5, 6, true, 3},
+	{0x86, 0, 5, true, 4},
+	{0x8C, 1, 6, true, 0},
+	{0x1C, 7, 5, true, 1},
+	{0x98, 2, 6, true, 0},
+	{0x1C, 5, 7, true, 1},
+	{0x34, 3, 6, true, 0},
+	{0x8C, 4, 5, true, 1},
+	{0x98, 2, 6, true, 0},
+	{0x8C, 5, 4, true, 1},
+	{0xA8, 0, 6, true, 2},
+	{0x98, 5, 1, true, 0},
+	{0x98, 6, 5, true, 2},
+	{0x89, 1, 6, true, 4},
+	{0xA4, 3, 0, true, 1},
+	{0x8C, 5, 6, true, 4},
+	{0xA8, 0, 2, true, 1},
+	{0x98, 6, 5, true, 0},
+	{0xC4, 4, 3, true, 1},
+	{0x94, 6, 5, true, 0},
+	{0x1C, 7, 6, true, 1},
+	{0x98, 2, 5, true, 0},
+	{0x1C, 6, 7, true, 1},
+	{0x1C, 5, 6, true, 0},
+	{0x94, 3, 5, true, 1},
+	{0x8C, 4, 6, true, 0},
+	{0x94, 1, 5, true, 3},
+	{0x94, 6, 1, true, 0},
+	{0xD0, 3, 5, true, 2},
+	{0x98, 6, 0, true, 1},
+	{0x94, 5, 6, true, 3},
+	{0x94, 1, 5, true, 0},
+	{0x98, 2, 6, true, 1},
+	{0x8C, 4, 5, true, 0},
+	{0x1C, 7, 6, true, 1},
+	{0x8C, 0, 5, true, 4},
+	{0x89, 1, 6, true, 2},
+	{0x98, 5, 0, true, 1},
+	{0x94, 6, 5, true, 3},
+	{0x92, 0, 6, true, 2},
+	{0x98, 1, 5, true, 0},
+	{0x98, 6, 2, true, 1},
+	{0xD0, 0, 5, true, 3},
+	{0x94, 6, 0, true, 1},
+	{0x8C, 5, 6, true, 4},
+	{0x8C, 1, 5, true, 0},
+	{0x1C, 6, 7, true, 1},
+	{0x1C, 5, 6, true, 0},
+	{0xB0, 2, 3, true, 1},
+	{0xC4, 4, 5, true, 0},
+	{0x8C, 6, 4, true, 1},
+	{0xA4, 3, 6, true, 0},
+	{0x1C, 5, 7, true, 1},
+	{0x4C, 0, 5, true, 4},
+	{0x8C, 6, 0, true, 1},
+	{0x34, 7, 6, true, 3},
+	{0x94, 5, 0, true, 1},
+	{0x98, 6, 5, true, 2},
+};
+
+static const struct ppe_scheduler_port_config ppe_port_sch_config[] = {
+	{
+		.port		= 0,
+		.flow_level	= true,
+		.node_id	= 0,
+		.loop_num	= 1,
+		.pri_max	= 1,
+		.flow_id	= 0,
+		.drr_node_id	= 0,
+	},
+	{
+		.port		= 0,
+		.flow_level	= false,
+		.node_id	= 0,
+		.loop_num	= 8,
+		.pri_max	= 8,
+		.flow_id	= 0,
+		.drr_node_id	= 0,
+	},
+	{
+		.port		= 0,
+		.flow_level	= false,
+		.node_id	= 8,
+		.loop_num	= 8,
+		.pri_max	= 8,
+		.flow_id	= 0,
+		.drr_node_id	= 0,
+	},
+	{
+		.port		= 0,
+		.flow_level	= false,
+		.node_id	= 16,
+		.loop_num	= 8,
+		.pri_max	= 8,
+		.flow_id	= 0,
+		.drr_node_id	= 0,
+	},
+	{
+		.port		= 0,
+		.flow_level	= false,
+		.node_id	= 24,
+		.loop_num	= 8,
+		.pri_max	= 8,
+		.flow_id	= 0,
+		.drr_node_id	= 0,
+	},
+	{
+		.port		= 0,
+		.flow_level	= false,
+		.node_id	= 32,
+		.loop_num	= 8,
+		.pri_max	= 8,
+		.flow_id	= 0,
+		.drr_node_id	= 0,
+	},
+	{
+		.port		= 0,
+		.flow_level	= false,
+		.node_id	= 40,
+		.loop_num	= 8,
+		.pri_max	= 8,
+		.flow_id	= 0,
+		.drr_node_id	= 0,
+	},
+	{
+		.port		= 0,
+		.flow_level	= false,
+		.node_id	= 48,
+		.loop_num	= 8,
+		.pri_max	= 8,
+		.flow_id	= 0,
+		.drr_node_id	= 0,
+	},
+	{
+		.port		= 0,
+		.flow_level	= false,
+		.node_id	= 56,
+		.loop_num	= 8,
+		.pri_max	= 8,
+		.flow_id	= 0,
+		.drr_node_id	= 0,
+	},
+	{
+		.port		= 0,
+		.flow_level	= false,
+		.node_id	= 256,
+		.loop_num	= 8,
+		.pri_max	= 8,
+		.flow_id	= 0,
+		.drr_node_id	= 0,
+	},
+	{
+		.port		= 0,
+		.flow_level	= false,
+		.node_id	= 264,
+		.loop_num	= 8,
+		.pri_max	= 8,
+		.flow_id	= 0,
+		.drr_node_id	= 0,
+	},
+	{
+		.port		= 1,
+		.flow_level	= true,
+		.node_id	= 36,
+		.loop_num	= 2,
+		.pri_max	= 0,
+		.flow_id	= 1,
+		.drr_node_id	= 8,
+	},
+	{
+		.port		= 1,
+		.flow_level	= false,
+		.node_id	= 144,
+		.loop_num	= 16,
+		.pri_max	= 8,
+		.flow_id	= 36,
+		.drr_node_id	= 48,
+	},
+	{
+		.port		= 1,
+		.flow_level	= false,
+		.node_id	= 272,
+		.loop_num	= 4,
+		.pri_max	= 4,
+		.flow_id	= 36,
+		.drr_node_id	= 48,
+	},
+	{
+		.port		= 2,
+		.flow_level	= true,
+		.node_id	= 40,
+		.loop_num	= 2,
+		.pri_max	= 0,
+		.flow_id	= 2,
+		.drr_node_id	= 12,
+	},
+	{
+		.port		= 2,
+		.flow_level	= false,
+		.node_id	= 160,
+		.loop_num	= 16,
+		.pri_max	= 8,
+		.flow_id	= 40,
+		.drr_node_id	= 64,
+	},
+	{
+		.port		= 2,
+		.flow_level	= false,
+		.node_id	= 276,
+		.loop_num	= 4,
+		.pri_max	= 4,
+		.flow_id	= 40,
+		.drr_node_id	= 64,
+	},
+	{
+		.port		= 3,
+		.flow_level	= true,
+		.node_id	= 44,
+		.loop_num	= 2,
+		.pri_max	= 0,
+		.flow_id	= 3,
+		.drr_node_id	= 16,
+	},
+	{
+		.port		= 3,
+		.flow_level	= false,
+		.node_id	= 176,
+		.loop_num	= 16,
+		.pri_max	= 8,
+		.flow_id	= 44,
+		.drr_node_id	= 80,
+	},
+	{
+		.port		= 3,
+		.flow_level	= false,
+		.node_id	= 280,
+		.loop_num	= 4,
+		.pri_max	= 4,
+		.flow_id	= 44,
+		.drr_node_id	= 80,
+	},
+	{
+		.port		= 4,
+		.flow_level	= true,
+		.node_id	= 48,
+		.loop_num	= 2,
+		.pri_max	= 0,
+		.flow_id	= 4,
+		.drr_node_id	= 20,
+	},
+	{
+		.port		= 4,
+		.flow_level	= false,
+		.node_id	= 192,
+		.loop_num	= 16,
+		.pri_max	= 8,
+		.flow_id	= 48,
+		.drr_node_id	= 96,
+	},
+	{
+		.port		= 4,
+		.flow_level	= false,
+		.node_id	= 284,
+		.loop_num	= 4,
+		.pri_max	= 4,
+		.flow_id	= 48,
+		.drr_node_id	= 96,
+	},
+	{
+		.port		= 5,
+		.flow_level	= true,
+		.node_id	= 52,
+		.loop_num	= 2,
+		.pri_max	= 0,
+		.flow_id	= 5,
+		.drr_node_id	= 24,
+	},
+	{
+		.port		= 5,
+		.flow_level	= false,
+		.node_id	= 208,
+		.loop_num	= 16,
+		.pri_max	= 8,
+		.flow_id	= 52,
+		.drr_node_id	= 112,
+	},
+	{
+		.port		= 5,
+		.flow_level	= false,
+		.node_id	= 288,
+		.loop_num	= 4,
+		.pri_max	= 4,
+		.flow_id	= 52,
+		.drr_node_id	= 112,
+	},
+	{
+		.port		= 6,
+		.flow_level	= true,
+		.node_id	= 56,
+		.loop_num	= 2,
+		.pri_max	= 0,
+		.flow_id	= 6,
+		.drr_node_id	= 28,
+	},
+	{
+		.port		= 6,
+		.flow_level	= false,
+		.node_id	= 224,
+		.loop_num	= 16,
+		.pri_max	= 8,
+		.flow_id	= 56,
+		.drr_node_id	= 128,
+	},
+	{
+		.port		= 6,
+		.flow_level	= false,
+		.node_id	= 292,
+		.loop_num	= 4,
+		.pri_max	= 4,
+		.flow_id	= 56,
+		.drr_node_id	= 128,
+	},
+	{
+		.port		= 7,
+		.flow_level	= true,
+		.node_id	= 60,
+		.loop_num	= 2,
+		.pri_max	= 0,
+		.flow_id	= 7,
+		.drr_node_id	= 32,
+	},
+	{
+		.port		= 7,
+		.flow_level	= false,
+		.node_id	= 240,
+		.loop_num	= 16,
+		.pri_max	= 8,
+		.flow_id	= 60,
+		.drr_node_id	= 144,
+	},
+	{
+		.port		= 7,
+		.flow_level	= false,
+		.node_id	= 296,
+		.loop_num	= 4,
+		.pri_max	= 4,
+		.flow_id	= 60,
+		.drr_node_id	= 144,
+	},
+};
+
+/* Set the PPE queue level scheduler configuration. */
+static int ppe_scheduler_l0_queue_map_set(struct ppe_device *ppe_dev,
+					  int node_id, int port,
+					  struct ppe_scheduler_cfg scheduler_cfg)
+{
+	u32 val, reg;
+	int ret;
+
+	reg = PPE_L0_FLOW_MAP_TBL_ADDR + node_id * PPE_L0_FLOW_MAP_TBL_INC;
+	val = FIELD_PREP(PPE_L0_FLOW_MAP_TBL_FLOW_ID, scheduler_cfg.flow_id);
+	val |= FIELD_PREP(PPE_L0_FLOW_MAP_TBL_C_PRI, scheduler_cfg.pri);
+	val |= FIELD_PREP(PPE_L0_FLOW_MAP_TBL_E_PRI, scheduler_cfg.pri);
+	val |= FIELD_PREP(PPE_L0_FLOW_MAP_TBL_C_NODE_WT, scheduler_cfg.drr_node_wt);
+	val |= FIELD_PREP(PPE_L0_FLOW_MAP_TBL_E_NODE_WT, scheduler_cfg.drr_node_wt);
+
+	ret = regmap_write(ppe_dev->regmap, reg, val);
+	if (ret)
+		return ret;
+
+	reg = PPE_L0_C_FLOW_CFG_TBL_ADDR +
+	      (scheduler_cfg.flow_id * PPE_QUEUE_SCH_PRI_NUM + scheduler_cfg.pri) *
+	      PPE_L0_C_FLOW_CFG_TBL_INC;
+	val = FIELD_PREP(PPE_L0_C_FLOW_CFG_TBL_NODE_ID, scheduler_cfg.drr_node_id);
+	val |= FIELD_PREP(PPE_L0_C_FLOW_CFG_TBL_NODE_CREDIT_UNIT, scheduler_cfg.unit_is_packet);
+
+	ret = regmap_write(ppe_dev->regmap, reg, val);
+	if (ret)
+		return ret;
+
+	reg = PPE_L0_E_FLOW_CFG_TBL_ADDR +
+	      (scheduler_cfg.flow_id * PPE_QUEUE_SCH_PRI_NUM + scheduler_cfg.pri) *
+	      PPE_L0_E_FLOW_CFG_TBL_INC;
+	val = FIELD_PREP(PPE_L0_E_FLOW_CFG_TBL_NODE_ID, scheduler_cfg.drr_node_id);
+	val |= FIELD_PREP(PPE_L0_E_FLOW_CFG_TBL_NODE_CREDIT_UNIT, scheduler_cfg.unit_is_packet);
+
+	ret = regmap_write(ppe_dev->regmap, reg, val);
+	if (ret)
+		return ret;
+
+	reg = PPE_L0_FLOW_PORT_MAP_TBL_ADDR + node_id * PPE_L0_FLOW_PORT_MAP_TBL_INC;
+	val = FIELD_PREP(PPE_L0_FLOW_PORT_MAP_TBL_PORT_NUM, port);
+
+	ret = regmap_write(ppe_dev->regmap, reg, val);
+	if (ret)
+		return ret;
+
+	reg = PPE_L0_COMP_CFG_TBL_ADDR + node_id * PPE_L0_COMP_CFG_TBL_INC;
+	val = FIELD_PREP(PPE_L0_COMP_CFG_TBL_NODE_METER_LEN, scheduler_cfg.frame_mode);
+
+	return regmap_update_bits(ppe_dev->regmap, reg,
+				  PPE_L0_COMP_CFG_TBL_NODE_METER_LEN,
+				  val);
+}
+
+/* Set the PPE flow level scheduler configuration. */
+static int ppe_scheduler_l1_queue_map_set(struct ppe_device *ppe_dev,
+					  int node_id, int port,
+					  struct ppe_scheduler_cfg scheduler_cfg)
+{
+	u32 val, reg;
+	int ret;
+
+	val = FIELD_PREP(PPE_L1_FLOW_MAP_TBL_FLOW_ID, scheduler_cfg.flow_id);
+	val |= FIELD_PREP(PPE_L1_FLOW_MAP_TBL_C_PRI, scheduler_cfg.pri);
+	val |= FIELD_PREP(PPE_L1_FLOW_MAP_TBL_E_PRI, scheduler_cfg.pri);
+	val |= FIELD_PREP(PPE_L1_FLOW_MAP_TBL_C_NODE_WT, scheduler_cfg.drr_node_wt);
+	val |= FIELD_PREP(PPE_L1_FLOW_MAP_TBL_E_NODE_WT, scheduler_cfg.drr_node_wt);
+	reg = PPE_L1_FLOW_MAP_TBL_ADDR + node_id * PPE_L1_FLOW_MAP_TBL_INC;
+
+	ret = regmap_write(ppe_dev->regmap, reg, val);
+	if (ret)
+		return ret;
+
+	val = FIELD_PREP(PPE_L1_C_FLOW_CFG_TBL_NODE_ID, scheduler_cfg.drr_node_id);
+	val |= FIELD_PREP(PPE_L1_C_FLOW_CFG_TBL_NODE_CREDIT_UNIT, scheduler_cfg.unit_is_packet);
+	reg = PPE_L1_C_FLOW_CFG_TBL_ADDR +
+	      (scheduler_cfg.flow_id * PPE_QUEUE_SCH_PRI_NUM + scheduler_cfg.pri) *
+	      PPE_L1_C_FLOW_CFG_TBL_INC;
+
+	ret = regmap_write(ppe_dev->regmap, reg, val);
+	if (ret)
+		return ret;
+
+	val = FIELD_PREP(PPE_L1_E_FLOW_CFG_TBL_NODE_ID, scheduler_cfg.drr_node_id);
+	val |= FIELD_PREP(PPE_L1_E_FLOW_CFG_TBL_NODE_CREDIT_UNIT, scheduler_cfg.unit_is_packet);
+	reg = PPE_L1_E_FLOW_CFG_TBL_ADDR +
+		(scheduler_cfg.flow_id * PPE_QUEUE_SCH_PRI_NUM + scheduler_cfg.pri) *
+		PPE_L1_E_FLOW_CFG_TBL_INC;
+
+	ret = regmap_write(ppe_dev->regmap, reg, val);
+	if (ret)
+		return ret;
+
+	val = FIELD_PREP(PPE_L1_FLOW_PORT_MAP_TBL_PORT_NUM, port);
+	reg = PPE_L1_FLOW_PORT_MAP_TBL_ADDR + node_id * PPE_L1_FLOW_PORT_MAP_TBL_INC;
+
+	ret = regmap_write(ppe_dev->regmap, reg, val);
+	if (ret)
+		return ret;
+
+	reg = PPE_L1_COMP_CFG_TBL_ADDR + node_id * PPE_L1_COMP_CFG_TBL_INC;
+	val = FIELD_PREP(PPE_L1_COMP_CFG_TBL_NODE_METER_LEN, scheduler_cfg.frame_mode);
+
+	return regmap_update_bits(ppe_dev->regmap, reg, PPE_L1_COMP_CFG_TBL_NODE_METER_LEN, val);
+}
+
+/**
+ * ppe_queue_scheduler_set - Configure scheduler for PPE hardware queue
+ * @ppe_dev: PPE device
+ * @node_id: PPE queue ID or flow ID
+ * @flow_level: Flow level scheduler or queue level scheduler
+ * @port: PPE port ID set scheduler configuration
+ * @scheduler_cfg: PPE scheduler configuration
+ *
+ * PPE scheduler configuration supports queue level and flow level on
+ * the PPE egress port.
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int ppe_queue_scheduler_set(struct ppe_device *ppe_dev,
+			    int node_id, bool flow_level, int port,
+			    struct ppe_scheduler_cfg scheduler_cfg)
+{
+	if (flow_level)
+		return ppe_scheduler_l1_queue_map_set(ppe_dev, node_id,
+						      port, scheduler_cfg);
+
+	return ppe_scheduler_l0_queue_map_set(ppe_dev, node_id,
+					      port, scheduler_cfg);
+}
+
 static int ppe_config_bm_threshold(struct ppe_device *ppe_dev, int bm_port_id,
 				   const struct ppe_bm_port_config port_cfg)
 {
@@ -369,6 +1038,135 @@ static int ppe_config_qm(struct ppe_device *ppe_dev)
 	return ret;
 }
 
+static int ppe_node_scheduler_config(struct ppe_device *ppe_dev,
+				     const struct ppe_scheduler_port_config config)
+{
+	struct ppe_scheduler_cfg sch_cfg;
+	int ret, i;
+
+	for (i = 0; i < config.loop_num; i++) {
+		if (!config.pri_max) {
+			/* Round robin scheduler without priority. */
+			sch_cfg.flow_id = config.flow_id;
+			sch_cfg.pri = 0;
+			sch_cfg.drr_node_id = config.drr_node_id;
+		} else {
+			sch_cfg.flow_id = config.flow_id + (i / config.pri_max);
+			sch_cfg.pri = i % config.pri_max;
+			sch_cfg.drr_node_id = config.drr_node_id + i;
+		}
+
+		/* Scheduler weight, must be more than 0. */
+		sch_cfg.drr_node_wt = 1;
+		/* Byte based to be scheduled. */
+		sch_cfg.unit_is_packet = false;
+		/* Frame + CRC calculated. */
+		sch_cfg.frame_mode = PPE_SCH_WITH_FRAME_CRC;
+
+		ret = ppe_queue_scheduler_set(ppe_dev, config.node_id + i,
+					      config.flow_level,
+					      config.port,
+					      sch_cfg);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/* Initialize scheduler settings for PPE buffer utilization and dispatching
+ * packet on PPE queue.
+ */
+static int ppe_config_scheduler(struct ppe_device *ppe_dev)
+{
+	const struct ppe_scheduler_port_config *port_cfg;
+	const struct ppe_scheduler_qm_config *qm_cfg;
+	const struct ppe_scheduler_bm_config *bm_cfg;
+	int ret, i, count;
+	u32 val, reg;
+
+	count = ARRAY_SIZE(ipq9574_ppe_sch_bm_config);
+	bm_cfg = ipq9574_ppe_sch_bm_config;
+
+	/* Configure the depth of BM scheduler entries. */
+	val = FIELD_PREP(PPE_BM_SCH_CTRL_SCH_DEPTH, count);
+	val |= FIELD_PREP(PPE_BM_SCH_CTRL_SCH_OFFSET, 0);
+	val |= FIELD_PREP(PPE_BM_SCH_CTRL_SCH_EN, 1);
+
+	ret = regmap_write(ppe_dev->regmap, PPE_BM_SCH_CTRL_ADDR, val);
+	if (ret)
+		goto sch_config_fail;
+
+	/* Configure each BM scheduler entry with the valid ingress port and
+	 * egress port, the second port takes effect when the specified port
+	 * is in the inactive state.
+	 */
+	for (i = 0; i < count; i++) {
+		val = FIELD_PREP(PPE_BM_SCH_CFG_TBL_VALID, bm_cfg[i].valid);
+		val |= FIELD_PREP(PPE_BM_SCH_CFG_TBL_DIR, bm_cfg[i].dir);
+		val |= FIELD_PREP(PPE_BM_SCH_CFG_TBL_PORT_NUM, bm_cfg[i].port);
+		val |= FIELD_PREP(PPE_BM_SCH_CFG_TBL_SECOND_PORT_VALID,
+				  bm_cfg[i].backup_port_valid);
+		val |= FIELD_PREP(PPE_BM_SCH_CFG_TBL_SECOND_PORT,
+				  bm_cfg[i].backup_port);
+
+		reg = PPE_BM_SCH_CFG_TBL_ADDR + i * PPE_BM_SCH_CFG_TBL_INC;
+		ret = regmap_write(ppe_dev->regmap, reg, val);
+		if (ret)
+			goto sch_config_fail;
+	}
+
+	count = ARRAY_SIZE(ipq9574_ppe_sch_qm_config);
+	qm_cfg = ipq9574_ppe_sch_qm_config;
+
+	/* Configure the depth of QM scheduler entries. */
+	val = FIELD_PREP(PPE_PSCH_SCH_DEPTH_CFG_SCH_DEPTH, count);
+	ret = regmap_write(ppe_dev->regmap, PPE_PSCH_SCH_DEPTH_CFG_ADDR, val);
+	if (ret)
+		goto sch_config_fail;
+
+	/* Configure each QM scheduler entry with enqueue port and dequeue
+	 * port, the second port takes effect when the specified dequeue
+	 * port is in the inactive port.
+	 */
+	for (i = 0; i < count; i++) {
+		val = FIELD_PREP(PPE_PSCH_SCH_CFG_TBL_ENS_PORT_BITMAP,
+				 qm_cfg[i].ensch_port_bmp);
+		val |= FIELD_PREP(PPE_PSCH_SCH_CFG_TBL_ENS_PORT,
+				  qm_cfg[i].ensch_port);
+		val |= FIELD_PREP(PPE_PSCH_SCH_CFG_TBL_DES_PORT,
+				  qm_cfg[i].desch_port);
+		val |= FIELD_PREP(PPE_PSCH_SCH_CFG_TBL_DES_SECOND_PORT_EN,
+				  qm_cfg[i].desch_backup_port_valid);
+		val |= FIELD_PREP(PPE_PSCH_SCH_CFG_TBL_DES_SECOND_PORT,
+				  qm_cfg[i].desch_backup_port);
+
+		reg = PPE_PSCH_SCH_CFG_TBL_ADDR + i * PPE_PSCH_SCH_CFG_TBL_INC;
+		ret = regmap_write(ppe_dev->regmap, reg, val);
+		if (ret)
+			goto sch_config_fail;
+	}
+
+	count = ARRAY_SIZE(ppe_port_sch_config);
+	port_cfg = ppe_port_sch_config;
+
+	/* Configure scheduler per PPE queue or flow. */
+	for (i = 0; i < count; i++) {
+		if (port_cfg[i].port >= ppe_dev->num_ports)
+			break;
+
+		ret = ppe_node_scheduler_config(ppe_dev, port_cfg[i]);
+		if (ret)
+			goto sch_config_fail;
+	}
+
+	return 0;
+
+sch_config_fail:
+	dev_err(ppe_dev->dev, "PPE scheduler arbitration config error %d\n", ret);
+	return ret;
+};
+
 int ppe_hw_config(struct ppe_device *ppe_dev)
 {
 	int ret;
@@ -377,5 +1175,9 @@ int ppe_hw_config(struct ppe_device *ppe_dev)
 	if (ret)
 		return ret;
 
-	return ppe_config_qm(ppe_dev);
+	ret = ppe_config_qm(ppe_dev);
+	if (ret)
+		return ret;
+
+	return ppe_config_scheduler(ppe_dev);
 }
diff --git a/drivers/net/ethernet/qualcomm/ppe/ppe_config.h b/drivers/net/ethernet/qualcomm/ppe/ppe_config.h
index 7b2f6a71cd4c..f28cfe7e1548 100644
--- a/drivers/net/ethernet/qualcomm/ppe/ppe_config.h
+++ b/drivers/net/ethernet/qualcomm/ppe/ppe_config.h
@@ -8,5 +8,42 @@
 
 #include "ppe.h"
 
+/**
+ * enum ppe_scheduler_frame_mode - PPE scheduler frame mode.
+ * @PPE_SCH_WITH_IPG_PREAMBLE_FRAME_CRC: The scheduled frame includes IPG,
+ * preamble, Ethernet packet and CRC.
+ * @PPE_SCH_WITH_FRAME_CRC: The scheduled frame includes Ethernet frame and CRC
+ * excluding IPG and preamble.
+ * @PPE_SCH_WITH_L3_PAYLOAD: The scheduled frame includes layer 3 packet data.
+ */
+enum ppe_scheduler_frame_mode {
+	PPE_SCH_WITH_IPG_PREAMBLE_FRAME_CRC = 0,
+	PPE_SCH_WITH_FRAME_CRC = 1,
+	PPE_SCH_WITH_L3_PAYLOAD = 2,
+};
+
+/**
+ * struct ppe_scheduler_cfg - PPE scheduler configuration.
+ * @flow_id: PPE flow ID.
+ * @pri: Scheduler priority.
+ * @drr_node_id: Node ID for scheduled traffic.
+ * @drr_node_wt: Weight for scheduled traffic.
+ * @unit_is_packet: Packet based or byte based unit for scheduled traffic.
+ * @frame_mode: Packet mode to be scheduled.
+ *
+ * PPE scheduler supports commit rate and exceed rate configurations.
+ */
+struct ppe_scheduler_cfg {
+	int flow_id;
+	int pri;
+	int drr_node_id;
+	int drr_node_wt;
+	bool unit_is_packet;
+	enum ppe_scheduler_frame_mode frame_mode;
+};
+
 int ppe_hw_config(struct ppe_device *ppe_dev);
+int ppe_queue_scheduler_set(struct ppe_device *ppe_dev,
+			    int node_id, bool flow_level, int port,
+			    struct ppe_scheduler_cfg scheduler_cfg);
 #endif
diff --git a/drivers/net/ethernet/qualcomm/ppe/ppe_regs.h b/drivers/net/ethernet/qualcomm/ppe/ppe_regs.h
index 692ea7b71dfc..a1982fbecee7 100644
--- a/drivers/net/ethernet/qualcomm/ppe/ppe_regs.h
+++ b/drivers/net/ethernet/qualcomm/ppe/ppe_regs.h
@@ -9,16 +9,113 @@
 
 #include <linux/bitfield.h>
 
+/* PPE scheduler configurations for buffer manager block. */
+#define PPE_BM_SCH_CTRL_ADDR			0xb000
+#define PPE_BM_SCH_CTRL_INC			4
+#define PPE_BM_SCH_CTRL_SCH_DEPTH		GENMASK(7, 0)
+#define PPE_BM_SCH_CTRL_SCH_OFFSET		GENMASK(14, 8)
+#define PPE_BM_SCH_CTRL_SCH_EN			BIT(31)
+
+#define PPE_BM_SCH_CFG_TBL_ADDR			0xc000
+#define PPE_BM_SCH_CFG_TBL_ENTRIES		128
+#define PPE_BM_SCH_CFG_TBL_INC			0x10
+#define PPE_BM_SCH_CFG_TBL_PORT_NUM		GENMASK(3, 0)
+#define PPE_BM_SCH_CFG_TBL_DIR			BIT(4)
+#define PPE_BM_SCH_CFG_TBL_VALID		BIT(5)
+#define PPE_BM_SCH_CFG_TBL_SECOND_PORT_VALID	BIT(6)
+#define PPE_BM_SCH_CFG_TBL_SECOND_PORT		GENMASK(11, 8)
+
 /* PPE queue counters enable/disable control. */
 #define PPE_EG_BRIDGE_CONFIG_ADDR		0x20044
 #define PPE_EG_BRIDGE_CONFIG_QUEUE_CNT_EN	BIT(2)
 
+/* Port scheduler global config. */
+#define PPE_PSCH_SCH_DEPTH_CFG_ADDR		0x400000
+#define PPE_PSCH_SCH_DEPTH_CFG_INC		4
+#define PPE_PSCH_SCH_DEPTH_CFG_SCH_DEPTH	GENMASK(7, 0)
+
+/* PPE queue level scheduler configurations. */
+#define PPE_L0_FLOW_MAP_TBL_ADDR		0x402000
+#define PPE_L0_FLOW_MAP_TBL_ENTRIES		300
+#define PPE_L0_FLOW_MAP_TBL_INC			0x10
+#define PPE_L0_FLOW_MAP_TBL_FLOW_ID		GENMASK(5, 0)
+#define PPE_L0_FLOW_MAP_TBL_C_PRI		GENMASK(8, 6)
+#define PPE_L0_FLOW_MAP_TBL_E_PRI		GENMASK(11, 9)
+#define PPE_L0_FLOW_MAP_TBL_C_NODE_WT		GENMASK(21, 12)
+#define PPE_L0_FLOW_MAP_TBL_E_NODE_WT		GENMASK(31, 22)
+
+#define PPE_L0_C_FLOW_CFG_TBL_ADDR		0x404000
+#define PPE_L0_C_FLOW_CFG_TBL_ENTRIES		512
+#define PPE_L0_C_FLOW_CFG_TBL_INC		0x10
+#define PPE_L0_C_FLOW_CFG_TBL_NODE_ID		GENMASK(7, 0)
+#define PPE_L0_C_FLOW_CFG_TBL_NODE_CREDIT_UNIT	BIT(8)
+
+#define PPE_L0_E_FLOW_CFG_TBL_ADDR		0x406000
+#define PPE_L0_E_FLOW_CFG_TBL_ENTRIES		512
+#define PPE_L0_E_FLOW_CFG_TBL_INC		0x10
+#define PPE_L0_E_FLOW_CFG_TBL_NODE_ID		GENMASK(7, 0)
+#define PPE_L0_E_FLOW_CFG_TBL_NODE_CREDIT_UNIT	BIT(8)
+
+#define PPE_L0_FLOW_PORT_MAP_TBL_ADDR		0x408000
+#define PPE_L0_FLOW_PORT_MAP_TBL_ENTRIES	300
+#define PPE_L0_FLOW_PORT_MAP_TBL_INC		0x10
+#define PPE_L0_FLOW_PORT_MAP_TBL_PORT_NUM	GENMASK(3, 0)
+
+#define PPE_L0_COMP_CFG_TBL_ADDR		0x428000
+#define PPE_L0_COMP_CFG_TBL_ENTRIES		300
+#define PPE_L0_COMP_CFG_TBL_INC			0x10
+#define PPE_L0_COMP_CFG_TBL_SHAPER_METER_LEN	GENMASK(1, 0)
+#define PPE_L0_COMP_CFG_TBL_NODE_METER_LEN	GENMASK(3, 2)
+
 /* Table addresses for per-queue dequeue setting. */
 #define PPE_DEQ_OPR_TBL_ADDR			0x430000
 #define PPE_DEQ_OPR_TBL_ENTRIES			300
 #define PPE_DEQ_OPR_TBL_INC			0x10
 #define PPE_DEQ_OPR_TBL_DEQ_DISABLE		BIT(0)
 
+/* PPE flow level scheduler configurations. */
+#define PPE_L1_FLOW_MAP_TBL_ADDR		0x440000
+#define PPE_L1_FLOW_MAP_TBL_ENTRIES		64
+#define PPE_L1_FLOW_MAP_TBL_INC			0x10
+#define PPE_L1_FLOW_MAP_TBL_FLOW_ID		GENMASK(3, 0)
+#define PPE_L1_FLOW_MAP_TBL_C_PRI		GENMASK(6, 4)
+#define PPE_L1_FLOW_MAP_TBL_E_PRI		GENMASK(9, 7)
+#define PPE_L1_FLOW_MAP_TBL_C_NODE_WT		GENMASK(19, 10)
+#define PPE_L1_FLOW_MAP_TBL_E_NODE_WT		GENMASK(29, 20)
+
+#define PPE_L1_C_FLOW_CFG_TBL_ADDR		0x442000
+#define PPE_L1_C_FLOW_CFG_TBL_ENTRIES		64
+#define PPE_L1_C_FLOW_CFG_TBL_INC		0x10
+#define PPE_L1_C_FLOW_CFG_TBL_NODE_ID		GENMASK(5, 0)
+#define PPE_L1_C_FLOW_CFG_TBL_NODE_CREDIT_UNIT	BIT(6)
+
+#define PPE_L1_E_FLOW_CFG_TBL_ADDR		0x444000
+#define PPE_L1_E_FLOW_CFG_TBL_ENTRIES		64
+#define PPE_L1_E_FLOW_CFG_TBL_INC		0x10
+#define PPE_L1_E_FLOW_CFG_TBL_NODE_ID		GENMASK(5, 0)
+#define PPE_L1_E_FLOW_CFG_TBL_NODE_CREDIT_UNIT	BIT(6)
+
+#define PPE_L1_FLOW_PORT_MAP_TBL_ADDR		0x446000
+#define PPE_L1_FLOW_PORT_MAP_TBL_ENTRIES	64
+#define PPE_L1_FLOW_PORT_MAP_TBL_INC		0x10
+#define PPE_L1_FLOW_PORT_MAP_TBL_PORT_NUM	GENMASK(3, 0)
+
+#define PPE_L1_COMP_CFG_TBL_ADDR		0x46a000
+#define PPE_L1_COMP_CFG_TBL_ENTRIES		64
+#define PPE_L1_COMP_CFG_TBL_INC			0x10
+#define PPE_L1_COMP_CFG_TBL_SHAPER_METER_LEN	GENMASK(1, 0)
+#define PPE_L1_COMP_CFG_TBL_NODE_METER_LEN	GENMASK(3, 2)
+
+/* PPE port scheduler configurations for egress. */
+#define PPE_PSCH_SCH_CFG_TBL_ADDR		0x47a000
+#define PPE_PSCH_SCH_CFG_TBL_ENTRIES		128
+#define PPE_PSCH_SCH_CFG_TBL_INC		0x10
+#define PPE_PSCH_SCH_CFG_TBL_DES_PORT		GENMASK(3, 0)
+#define PPE_PSCH_SCH_CFG_TBL_ENS_PORT		GENMASK(7, 4)
+#define PPE_PSCH_SCH_CFG_TBL_ENS_PORT_BITMAP	GENMASK(15, 8)
+#define PPE_PSCH_SCH_CFG_TBL_DES_SECOND_PORT_EN	BIT(16)
+#define PPE_PSCH_SCH_CFG_TBL_DES_SECOND_PORT	GENMASK(20, 17)
+
 /* There are 15 BM ports and 4 BM groups supported by PPE.
  * BM port (0-7) is for EDMA port 0, BM port (8-13) is for
  * PPE physical port 1-6 and BM port 14 is for EIP port.
