diff mbox series

[v4,4/5] arm64: dts: qcom: x1e80100-qcp: Add qref supply for PCIe PHYs

Message ID 20250604080237.494014-5-quic_wenbyao@quicinc.com
State New
Headers show
Series arm64: qcom: x1e80100-qcp: Add power supply and sideband signals for PCIe RC | expand

Commit Message

Wenbin Yao June 4, 2025, 8:02 a.m. UTC 
From: Qiang Yu <qiang.yu@oss.qualcomm.com>

All PCIe PHYs on X1E80100 require vdda-qref power supplies, but this is
missing in the current PHY device tree node. The PCIe port can still
function because the regulator L3J, which vdda-qref consumes, is voted by
other components.

Since the device tree should accurately describe the hardware, add the
vdda-qref power supply explicitly in all PCIe PHY device nodes.

Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Wenbin Yao <quic_wenbyao@quicinc.com>
---
 arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 3 +++
 1 file changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index 71c44e37a..3bbd234e5 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -993,6 +993,7 @@  &pcie3 {
 &pcie3_phy {
 	vdda-phy-supply = <&vreg_l3c_0p8>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;
+	vdda-qref-supply = <&vreg_l3j_0p8>;
 
 	status = "okay";
 };
@@ -1016,6 +1017,7 @@  &pcie4 {
 &pcie4_phy {
 	vdda-phy-supply = <&vreg_l3i_0p8>;
 	vdda-pll-supply = <&vreg_l3e_1p2>;
+	vdda-qref-supply = <&vreg_l3j_0p8>;
 
 	status = "okay";
 };
@@ -1052,6 +1054,7 @@  &pcie6a {
 &pcie6a_phy {
 	vdda-phy-supply = <&vreg_l1d_0p8>;
 	vdda-pll-supply = <&vreg_l2j_1p2>;
+	vdda-qref-supply = <&vreg_l3j_0p8>;
 
 	status = "okay";
 };