diff mbox series

[3/5] ARM: dts: qcom: msm8960: disable gsbi1 and gsbi5 nodes in msm8960 dtsi

Message ID 20250614-msm8960-sdcard-v1-3-ccce629428b6@smankusors.com
State New
Headers show
Series Add support for Sony Xperia SP | expand

Commit Message

Antony Kurniawan Soemardi June 13, 2025, 5:50 p.m. UTC 
Not all devices use gsbi1 and gsbi5, so these nodes should be disabled
in the SoC dtsi, following the existing pattern used for gsbi3. The
upstream samsung-expressatt and msm8960-cdp devices already have status
"okay" for these nodes, so this change should not break existing
functionality.

This eliminates the following error messages when gsbi nodes are not
configured in the board's device tree:
[    1.109723] gsbi 16000000.gsbi: missing mode configuration
[    1.109797] gsbi 16000000.gsbi: probe with driver gsbi failed with error -22

(Note: Xperia SP doesn't use gsbi5)

Signed-off-by: Antony Kurniawan Soemardi <linux@smankusors.com>
---
 arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index 66071ad498e49c4f54ba105fa94640575fe08da6..84d4d1bffa9f73b5e395e4290b8dc856e0966e9b 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -321,6 +321,7 @@  gsbi5: gsbi@16400000 {
 			ranges;
 
 			syscon-tcsr = <&tcsr>;
+			status = "disabled";
 
 			gsbi5_serial: serial@16440000 {
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
@@ -440,6 +441,7 @@  gsbi1: gsbi@16000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
+			status = "disabled";
 
 			gsbi1_spi: spi@16080000 {
 				compatible = "qcom,spi-qup-v1.1.1";