diff mbox series

[v2,3/4] arm64: dts: qcom: msm8976: Add sdc2 GPIOs

Message ID 20250615-bqx5plus-v2-3-72b45c84237d@apitzsch.eu
State New
Headers show
Series arm64: dts: qcom: msm8976-longcheer-l9360: Add initial device tree | expand

Commit Message

André Apitzsch via B4 Relay June 15, 2025, 8:35 p.m. UTC 
From: André Apitzsch <git@apitzsch.eu>

Downstream vendor code for reference:

https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/blob/LA.BR.1.3.7.c26/arch/arm/boot/dts/qcom/msm8976-pinctrl.dtsi#L223-263

Signed-off-by: André Apitzsch <git@apitzsch.eu>
---
 arch/arm64/boot/dts/qcom/msm8976.dtsi | 36 +++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
index 2a30246384700dac2ec868c6f371248cfcc643fc..f9962512f243d6c1af4931787f4602554c63bb39 100644
--- a/arch/arm64/boot/dts/qcom/msm8976.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -782,6 +782,42 @@  blsp2_i2c4_sleep: blsp2-i2c4-sleep-state {
 				bias-disable;
 			};
 
+			sdc2_default: sdc2-default-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <16>;
+				};
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <10>;
+				};
+			};
+
+			sdc2_sleep: sdc2-sleep-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					bias-disable;
+					drive-strength = <2>;
+				};
+				cmd-pins {
+					pins = "sdc2_cmd";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+				data-pins {
+					pins = "sdc2_data";
+					bias-pull-up;
+					drive-strength = <2>;
+				};
+			};
+
 			wcss_wlan_default: wcss-wlan-default-state  {
 				wcss-wlan2-pins {
 					pins = "gpio40";