diff mbox series

[3/3] arm64: dts: qcom: qcs8300: Add EPSS l3 interconnect provider node

Message ID 20250617090651.55-4-raviteja.laggyshetty@oss.qualcomm.com
State New
Headers show
Series Add EPSS L3 provider support on QCS8300 SoC | expand

Commit Message

Raviteja Laggyshetty June 17, 2025, 9:06 a.m. UTC 
Add Epoch Subsystem (EPSS) L3 interconnect provider node for QCS8300 SoC.

Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/qcs8300.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
index 7ada029c32c1..e056b3af21d5 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
@@ -12,6 +12,7 @@ 
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,qcs8300-rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
@@ -5433,6 +5434,14 @@  rpmhpd_opp_turbo_l1: opp-9 {
 			};
 		};
 
+		epss_l3_cl0: interconnect@18590000 {
+			compatible = "qcom,qcs8300-epss-l3", "qcom,epss-l3";
+				reg = <0x0 0x18590000 0x0 0x1000>;
+				clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+				clock-names = "xo", "alternate";
+				#interconnect-cells = <1>;
+		};
+
 		cpufreq_hw: cpufreq@18591000 {
 			compatible = "qcom,qcs8300-cpufreq-epss", "qcom,cpufreq-epss";
 			reg = <0x0 0x18591000 0x0 0x1000>,
@@ -5455,6 +5464,14 @@  cpufreq_hw: cpufreq@18591000 {
 			#freq-domain-cells = <1>;
 		};
 
+		epss_l3_cl1: interconnect@18592000 {
+			compatible = "qcom,qcs8300-epss-l3", "qcom,epss-l3";
+				reg = <0x0 0x18592000 0x0 0x1000>;
+				clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+				clock-names = "xo", "alternate";
+				#interconnect-cells = <1>;
+		};
+
 		remoteproc_gpdsp: remoteproc@20c00000 {
 			compatible = "qcom,qcs8300-gpdsp-pas", "qcom,sa8775p-gpdsp0-pas";
 			reg = <0x0 0x20c00000 0x0 0x10000>;