mbox series

[v4,0/2] Bluetooth: hci_h5: btrtl: Add support for RTL8822CS hci_ver 0x08

Message ID 20220119061723.2862683-1-adeep@lexina.in
Headers show
Series Bluetooth: hci_h5: btrtl: Add support for RTL8822CS hci_ver 0x08 | expand

Message

Viacheslav Jan. 19, 2022, 6:17 a.m. UTC 
Add a variation of RTL8822CS with hci_ver = 0x08. This is fully similar to RTL8822CS with hci_ver = 0x0a
observed on the Tanix TX6 Android set-top box and JetHome JetHub H1.

The controller does not always start when the system starts up, so we do a forced reset via gpio during initialization.

Changes from v3:
- add has_msft_ext option
Changes from v2:
- align the patches for bluetooth-next
Changes from v1:
- remove Signed-off-by chbgdn <chbgdn@gmail.com> as not reachable

Vyacheslav Bocharov (2):
  Bluetooth: btrtl: Add support for RTL8822C hci_ver 0x08
  Bluetooth: hci_h5: Add power reset via gpio in h5_btrtl_open

 drivers/bluetooth/btrtl.c  | 8 ++++++++
 drivers/bluetooth/hci_h5.c | 5 +++++
 2 files changed, 13 insertions(+)