mbox series

[v8,0/2] Enable Bluetooth on qcs6490-rb3gen2 board

Message ID 20250127064940.1360404-1-quic_janathot@quicinc.com
Headers show
Series Enable Bluetooth on qcs6490-rb3gen2 board | expand

Message

Janaki Ramaiah Thota Jan. 27, 2025, 6:49 a.m. UTC 
Resending the below  reviewed  patches after fixing the regulator warnings in v7 P1.
- Patch 1/2 Add and enable BT node for qcs6490-rb3gen board.
- Patch 2/2 Use the power sequencer for wcn6750.

----
Changes from v7:
* updated P1 & P2 with tag: Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> 
* Link to v7: https://lore.kernel.org/lkml/20250107134157.211702-1-quic_janathot@quicinc.com/#t

Changes from v6:
* Elaborated the commit message with more information.
* Link to v6: https://lore.kernel.org/lkml/20241223135700.22660-1-quic_janathot@quicinc.com/

Changes from v5:
* Update the wcn6750 required properties in bindings.
* Link to v5: https://lore.kernel.org/linux-arm-msm/20241209103455.9675-1-quic_janathot@quicinc.com/

Changes from v4:
* Added reviewed tag by Krzysztof in p1
* Updated the p2 commit message with sw_ctrl and wifi-enable are
  handled in wifi FW.
* Added blank line between the nodes in p2
* Placed the structures in proper order in p4
* Link to v4: https://lore.kernel.org/all/20241204131706.20791-1-quic_janathot@quicinc.com/

Changes from v3:
* Defined the PMU node and used the its output to power up BT
* Used power sequencer for wcn wcn6750 module
* Split the patch to multiple as per subtree
* Add description of the PMU of the WCN6750 module
* Include separate UART state node for sleep pin configuarion
* Link to v3: https://lore.kernel.org/linux-arm-msm/20241022104600.3228-1-quic_janathot@quicinc.com/

Changes from v2:
* Sorted nodes alphabetically
* Link to v2: https://lore.kernel.org/linux-arm-msm/20241010105107.30118-1-quic_janathot@quicinc.com/

Changes from v1:
* Corrected the board name in subject
* Link to v1: https://lore.kernel.org/linux-arm-msm/20241009111436.23473-1-quic_janathot@quicinc.com/
Janaki Ramaiah Thota (2):
  arm64: dts: qcom: qcs6490-rb3gen: add and enable BT node
  Bluetooth: hci_qca: use the power sequencer for wcn6750

 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 168 ++++++++++++++++++-
 drivers/bluetooth/hci_qca.c                  |   2 +-
 2 files changed, 168 insertions(+), 2 deletions(-)

--