@@ -49,7 +49,7 @@ Properties string Type [read-only]
org.bluez.AdvertisementMonitorManager1 for the available
options.
- (Int16, Uint16, Int16, Uint16) RSSIThreshholdsAndTimers [read-only, optional]
+ (Int16, Uint16, Int16, Uint16) RSSIThresholdsAndTimers [read-only, optional]
This contains HighRSSIThreshold, HighRSSIThresholdTimer,
LowRSSIThreshold, LowRSSIThresholdTimer in order. The
@@ -66,7 +66,11 @@ Properties string Type [read-only]
RSSIs of the received advertisement(s) during
LowRSSIThresholdTimer do not reach LowRSSIThreshold.
- array{(uint8, uint8, string)} Patterns [read-only, optional]
+ The valid range of a RSSI is -127 to +20 dBm while 127
+ dBm indicates unset. The valid range of a timer is 1 to
+ 300 seconds while 0 indicates unset.
+
+ array{(uint8, uint8, array{byte})} Patterns [read-only, optional]
If Type is set to 0x01, this must exist and has at least
one entry in the array.
@@ -80,8 +84,9 @@ Properties string Type [read-only]
See https://www.bluetooth.com/specifications/
assigned-numbers/generic-access-profile/ for
the possible allowed value.
- string content_of_pattern
- This is the value of the pattern.
+ array{byte} content_of_pattern
+ This is the value of the pattern. The maximum
+ length of the bytes is 31.
Advertisement Monitor Manager hierarchy
=======================================
@@ -91,20 +96,31 @@ Object path /org/bluez/{hci0,hci1,...}
Methods void RegisterMonitor(object application)
- This registers a hierarchy of advertisement monitors.
+ This registers the root path of a hierarchy of
+ advertisement monitors.
The application object path together with the D-Bus
system bus connection ID define the identification of
the application registering advertisement monitors.
+ Once a root path is registered by a client via this
+ method, the client can freely expose/unexpose
+ advertisement monitors without re-registering the root
+ path again. After use, the client should call
+ UnregisterMonitor() method to invalidate the
+ advertisement monitors.
Possible errors: org.bluez.Error.InvalidArguments
org.bluez.Error.AlreadyExists
+ org.bluez.Error.Failed
void UnregisterMonitor(object application)
- This unregisters advertisement monitors that have been
- previously registered. The object path parameter must
- match the same value that has been used on
- registration.
+ This unregisters a hierarchy of advertisement monitors
+ that has been previously registered. The object path
+ parameter must match the same value that has been used
+ on registration. Upon unregistration, the advertisement
+ monitor(s) should expect to receive Release() method as
+ the signal that the advertisement monitor(s) has been
+ deactivated.
Possible errors: org.bluez.Error.InvalidArguments
org.bluez.Error.DoesNotExist