@@ -2020,11 +2020,12 @@ static int qca_serdev_probe(struct serdev_device *serdev)
if (!qcadev->oper_speed)
BT_DBG("UART will pick default operating speed");
- if (data &&
- (qca_is_wcn399x(data->soc_type) ||
- qca_is_wcn6750(data->soc_type))) {
+ if (data)
qcadev->btsoc_type = data->soc_type;
+ else
+ qcadev->btsoc_type = QCA_ROME;
+ if (data && data->num_vregs) {
err = qca_init_regulators(qcadev, &serdev->dev, data->vregs,
data->num_vregs);
if (err) {
@@ -2033,48 +2034,33 @@ static int qca_serdev_probe(struct serdev_device *serdev)
}
qcadev->vregs_on = false;
+ }
- qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
- GPIOD_OUT_LOW);
- if (!qcadev->bt_en && data->soc_type == QCA_WCN6750) {
+ qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
+ GPIOD_OUT_LOW);
+ if (!qcadev->bt_en) {
+ if (qca_is_wcn6750(data->soc_type)) {
dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
power_ctrl_enabled = false;
- }
-
- qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
- GPIOD_IN);
- if (!qcadev->sw_ctrl && data->soc_type == QCA_WCN6750)
- dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
-
- qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
- if (IS_ERR(qcadev->susclk)) {
- dev_err(&serdev->dev, "failed to acquire clk\n");
- return PTR_ERR(qcadev->susclk);
- }
-
- err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
- if (err) {
- BT_ERR("wcn3990 serdev registration failed");
- return err;
- }
- } else {
- if (data)
- qcadev->btsoc_type = data->soc_type;
- else
- qcadev->btsoc_type = QCA_ROME;
-
- qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
- GPIOD_OUT_LOW);
- if (!qcadev->bt_en) {
+ } else if (!qca_is_wcn399x(data->soc_type)) {
dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
power_ctrl_enabled = false;
}
+ }
- qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
- if (IS_ERR(qcadev->susclk)) {
- dev_warn(&serdev->dev, "failed to acquire clk\n");
- return PTR_ERR(qcadev->susclk);
- }
+ qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
+ GPIOD_IN);
+ if (!qcadev->sw_ctrl && qca_is_wcn6750(data->soc_type))
+ dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
+
+ qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
+ if (IS_ERR(qcadev->susclk)) {
+ dev_err(&serdev->dev, "failed to acquire clk\n");
+ return PTR_ERR(qcadev->susclk);
+ }
+
+ if (!qca_is_wcn399x(data->soc_type) &&
+ !qca_is_wcn6750(data->soc_type)) {
err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);
if (err)
return err;
@@ -2082,13 +2068,17 @@ static int qca_serdev_probe(struct serdev_device *serdev)
err = clk_prepare_enable(qcadev->susclk);
if (err)
return err;
+ }
- err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
- if (err) {
- BT_ERR("Rome serdev registration failed");
+ err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
+ if (err) {
+ BT_ERR("QCA serdev registration failed");
+
+ if (!qca_is_wcn399x(data->soc_type) &&
+ !qca_is_wcn6750(data->soc_type))
clk_disable_unprepare(qcadev->susclk);
- return err;
- }
+
+ return err;
}
hdev = qcadev->serdev_hu.hdev;
The hci_qca driver has almost identical init paths. Merge them together to remove duplication in preparation to adding power sequencer support. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/bluetooth/hci_qca.c | 76 ++++++++++++++++--------------------- 1 file changed, 33 insertions(+), 43 deletions(-) -- 2.30.2