diff mbox series

[next,v2,2/2] bluetooth: btnxpuart: implement powerup sequence

Message ID 20250227105718.1692639-2-catalin.popescu@leica-geosystems.com
State New
Headers show
Series [next,v2,1/2] dt-bindings: net: bluetooth: nxp: add support for supply and reset | expand

Commit Message

Catalin Popescu Feb. 27, 2025, 10:57 a.m. UTC 
NXP bluetooth chip shares power supply and reset gpio with a WLAN
chip. Add support for power supply and reset and enforce powerup
sequence:
- apply power supply
- deassert reset/powerdown

Signed-off-by: Catalin Popescu <catalin.popescu@leica-geosystems.com>
Reviewed-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
---
v2:
- rebase on linux-next tag next-20250227
- add reviewed-by
---
 drivers/bluetooth/btnxpuart.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
diff mbox series

Patch

diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c
index 4f2f429c9800..81d1c9b97146 100644
--- a/drivers/bluetooth/btnxpuart.c
+++ b/drivers/bluetooth/btnxpuart.c
@@ -17,6 +17,8 @@ 
 #include <linux/crc32.h>
 #include <linux/string_helpers.h>
 #include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
@@ -191,6 +193,7 @@  struct btnxpuart_dev {
 
 	struct ps_data psdata;
 	struct btnxpuart_data *nxp_data;
+	struct reset_control *pdn;
 };
 
 #define NXP_V1_FW_REQ_PKT	0xa5
@@ -1522,6 +1525,7 @@  static int nxp_serdev_probe(struct serdev_device *serdev)
 {
 	struct hci_dev *hdev;
 	struct btnxpuart_dev *nxpdev;
+	int err;
 
 	nxpdev = devm_kzalloc(&serdev->dev, sizeof(*nxpdev), GFP_KERNEL);
 	if (!nxpdev)
@@ -1549,6 +1553,16 @@  static int nxp_serdev_probe(struct serdev_device *serdev)
 
 	crc8_populate_msb(crc8_table, POLYNOMIAL8);
 
+	nxpdev->pdn = devm_reset_control_get_optional_shared(&serdev->dev, NULL);
+	if (IS_ERR(nxpdev->pdn))
+		return PTR_ERR(nxpdev->pdn);
+
+	err = devm_regulator_get_enable(&serdev->dev, "vcc");
+	if (err) {
+		dev_err(&serdev->dev, "Failed to enable vcc regulator\n");
+		return err;
+	}
+
 	/* Initialize and register HCI device */
 	hdev = hci_alloc_dev();
 	if (!hdev) {
@@ -1556,6 +1570,8 @@  static int nxp_serdev_probe(struct serdev_device *serdev)
 		return -ENOMEM;
 	}
 
+	reset_control_deassert(nxpdev->pdn);
+
 	nxpdev->hdev = hdev;
 
 	hdev->bus = HCI_UART;
@@ -1583,6 +1599,7 @@  static int nxp_serdev_probe(struct serdev_device *serdev)
 	return 0;
 
 probe_fail:
+	reset_control_assert(nxpdev->pdn);
 	hci_free_dev(hdev);
 	return -ENODEV;
 }
@@ -1609,6 +1626,7 @@  static void nxp_serdev_remove(struct serdev_device *serdev)
 	}
 	ps_cleanup(nxpdev);
 	hci_unregister_dev(hdev);
+	reset_control_assert(nxpdev->pdn);
 	hci_free_dev(hdev);
 }