| Message ID | f395ffd03a6594ee11975b708721a33ccf8a4871.1653916330.git.hakan.jansson@infineon.com |
|---|---|
| State | Accepted |
| Commit | 6d912cc3c21fd64c50451c62059683f1fa5102f7 |
| Headers | show |
| Series | Bluetooth: hci_bcm: Autobaud mode support | expand |
This is automated email and please do not reply to this email! Dear submitter, Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series: PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=646037 ---Test result--- Test Summary: CheckPatch PASS 2.94 seconds GitLint FAIL 1.47 seconds SubjectPrefix FAIL 0.65 seconds BuildKernel PASS 35.43 seconds BuildKernel32 PASS 31.25 seconds Incremental Build with patchesPASS 48.75 seconds TestRunner: Setup PASS 552.97 seconds TestRunner: l2cap-tester PASS 18.88 seconds TestRunner: bnep-tester PASS 6.90 seconds TestRunner: mgmt-tester PASS 114.46 seconds TestRunner: rfcomm-tester PASS 11.12 seconds TestRunner: sco-tester PASS 11.08 seconds TestRunner: smp-tester PASS 11.06 seconds TestRunner: userchan-tester PASS 7.66 seconds Details ############################## Test: GitLint - FAIL - 1.47 seconds Run gitlint with rule in .gitlint [v3,1/2] dt-bindings: net: broadcom-bluetooth: Add property for autobaud mode 14: B1 Line exceeds max length (93>80): " https://lore.kernel.org/linux-devicetree/e6e83743-1441-dc53-fd1f-cdfb9a24932a@linaro.org/" [v3,2/2] Bluetooth: hci_bcm: Add support for FW loading in autobaud mode 21: B1 Line exceeds max length (93>80): " https://lore.kernel.org/linux-devicetree/e6e83743-1441-dc53-fd1f-cdfb9a24932a@linaro.org/" ############################## Test: SubjectPrefix - FAIL - 0.65 seconds Check subject contains "Bluetooth" prefix "Bluetooth: " is not specified in the subject --- Regards, Linux Bluetooth
diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml index 5aac094fd217..0a58d0fbcbc4 100644 --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml @@ -92,6 +92,13 @@ properties: pcm-sync-mode: slave, master pcm-clock-mode: slave, master + brcm,requires-autobaud-mode: + type: boolean + description: + Set this property if autobaud mode is required. Autobaud mode is required + if the device's initial baud rate in normal mode is not supported by the + host or if the device requires autobaud mode startup before loading FW. + interrupts: items: - description: Handle to the line HOST_WAKE used to wake
Add property, "brcm,requires-autobaud-mode", to enable autobaud mode selection. Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading. Autobaud mode can also be required on some boards where the controller device is using a non-standard baud rate when first powered on. Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com> --- V2 -> V3: - Rename DT property and modify description https://lore.kernel.org/linux-devicetree/e6e83743-1441-dc53-fd1f-cdfb9a24932a@linaro.org/ V1 -> V2: - Modify property description .../devicetree/bindings/net/broadcom-bluetooth.yaml | 7 +++++++ 1 file changed, 7 insertions(+)