diff --git a/crypto/zstd.c b/crypto/zstd.c
index 1a3309f066f7..90d442fa1e71 100644
--- a/crypto/zstd.c
+++ b/crypto/zstd.c
@@ -18,22 +18,22 @@
 #define ZSTD_DEF_LEVEL	3
 
 struct zstd_ctx {
-	ZSTD_CCtx *cctx;
-	ZSTD_DCtx *dctx;
+	zstd_cctx *cctx;
+	zstd_dctx *dctx;
 	void *cwksp;
 	void *dwksp;
 };
 
-static ZSTD_parameters zstd_params(void)
+static struct zstd_parameters zstd_params(void)
 {
-	return ZSTD_getParams(ZSTD_DEF_LEVEL, 0, 0);
+	return zstd_get_params(ZSTD_DEF_LEVEL, 0);
 }
 
 static int zstd_comp_init(struct zstd_ctx *ctx)
 {
 	int ret = 0;
-	const ZSTD_parameters params = zstd_params();
-	const size_t wksp_size = ZSTD_CCtxWorkspaceBound(params.cParams);
+	const struct zstd_parameters params = zstd_params();
+	const size_t wksp_size = zstd_cctx_workspace_bound(&params.cparams);
 
 	ctx->cwksp = vzalloc(wksp_size);
 	if (!ctx->cwksp) {
@@ -41,7 +41,7 @@ static int zstd_comp_init(struct zstd_ctx *ctx)
 		goto out;
 	}
 
-	ctx->cctx = ZSTD_initCCtx(ctx->cwksp, wksp_size);
+	ctx->cctx = zstd_init_cctx(ctx->cwksp, wksp_size);
 	if (!ctx->cctx) {
 		ret = -EINVAL;
 		goto out_free;
@@ -56,7 +56,7 @@ static int zstd_comp_init(struct zstd_ctx *ctx)
 static int zstd_decomp_init(struct zstd_ctx *ctx)
 {
 	int ret = 0;
-	const size_t wksp_size = ZSTD_DCtxWorkspaceBound();
+	const size_t wksp_size = zstd_dctx_workspace_bound();
 
 	ctx->dwksp = vzalloc(wksp_size);
 	if (!ctx->dwksp) {
@@ -64,7 +64,7 @@ static int zstd_decomp_init(struct zstd_ctx *ctx)
 		goto out;
 	}
 
-	ctx->dctx = ZSTD_initDCtx(ctx->dwksp, wksp_size);
+	ctx->dctx = zstd_init_dctx(ctx->dwksp, wksp_size);
 	if (!ctx->dctx) {
 		ret = -EINVAL;
 		goto out_free;
@@ -152,10 +152,10 @@ static int __zstd_compress(const u8 *src, unsigned int slen,
 {
 	size_t out_len;
 	struct zstd_ctx *zctx = ctx;
-	const ZSTD_parameters params = zstd_params();
+	const struct zstd_parameters params = zstd_params();
 
-	out_len = ZSTD_compressCCtx(zctx->cctx, dst, *dlen, src, slen, params);
-	if (ZSTD_isError(out_len))
+	out_len = zstd_compress_cctx(zctx->cctx, dst, *dlen, src, slen, &params);
+	if (zstd_is_error(out_len))
 		return -EINVAL;
 	*dlen = out_len;
 	return 0;
@@ -182,8 +182,8 @@ static int __zstd_decompress(const u8 *src, unsigned int slen,
 	size_t out_len;
 	struct zstd_ctx *zctx = ctx;
 
-	out_len = ZSTD_decompressDCtx(zctx->dctx, dst, *dlen, src, slen);
-	if (ZSTD_isError(out_len))
+	out_len = zstd_decompress_dctx(zctx->dctx, dst, *dlen, src, slen);
+	if (zstd_is_error(out_len))
 		return -EINVAL;
 	*dlen = out_len;
 	return 0;
diff --git a/fs/btrfs/zstd.c b/fs/btrfs/zstd.c
index 9a4871636c6c..a17ce9f474a1 100644
--- a/fs/btrfs/zstd.c
+++ b/fs/btrfs/zstd.c
@@ -28,13 +28,13 @@
 /* 307s to avoid pathologically clashing with transaction commit */
 #define ZSTD_BTRFS_RECLAIM_JIFFIES (307 * HZ)
 
-static ZSTD_parameters zstd_get_btrfs_parameters(unsigned int level,
+static struct zstd_parameters zstd_get_btrfs_parameters(unsigned int level,
 						 size_t src_len)
 {
-	ZSTD_parameters params = ZSTD_getParams(level, src_len, 0);
+	struct zstd_parameters params = zstd_get_params(level, src_len);
 
-	if (params.cParams.windowLog > ZSTD_BTRFS_MAX_WINDOWLOG)
-		params.cParams.windowLog = ZSTD_BTRFS_MAX_WINDOWLOG;
+	if (params.cparams.window_log > ZSTD_BTRFS_MAX_WINDOWLOG)
+		params.cparams.window_log = ZSTD_BTRFS_MAX_WINDOWLOG;
 	WARN_ON(src_len > ZSTD_BTRFS_MAX_INPUT);
 	return params;
 }
@@ -48,8 +48,8 @@ struct workspace {
 	unsigned long last_used; /* jiffies */
 	struct list_head list;
 	struct list_head lru_list;
-	ZSTD_inBuffer in_buf;
-	ZSTD_outBuffer out_buf;
+	struct zstd_in_buffer in_buf;
+	struct zstd_out_buffer out_buf;
 };
 
 /*
@@ -155,12 +155,12 @@ static void zstd_calc_ws_mem_sizes(void)
 	unsigned int level;
 
 	for (level = 1; level <= ZSTD_BTRFS_MAX_LEVEL; level++) {
-		ZSTD_parameters params =
+		struct zstd_parameters params =
 			zstd_get_btrfs_parameters(level, ZSTD_BTRFS_MAX_INPUT);
 		size_t level_size =
 			max_t(size_t,
-			      ZSTD_CStreamWorkspaceBound(params.cParams),
-			      ZSTD_DStreamWorkspaceBound(ZSTD_BTRFS_MAX_INPUT));
+			      zstd_cstream_workspace_bound(&params.cparams),
+			      zstd_dstream_workspace_bound(ZSTD_BTRFS_MAX_INPUT));
 
 		max_size = max_t(size_t, max_size, level_size);
 		zstd_ws_mem_sizes[level - 1] = max_size;
@@ -371,7 +371,7 @@ int zstd_compress_pages(struct list_head *ws, struct address_space *mapping,
 		unsigned long *total_in, unsigned long *total_out)
 {
 	struct workspace *workspace = list_entry(ws, struct workspace, list);
-	ZSTD_CStream *stream;
+	zstd_cstream *stream;
 	int ret = 0;
 	int nr_pages = 0;
 	struct page *in_page = NULL;  /* The current page to read */
@@ -381,7 +381,7 @@ int zstd_compress_pages(struct list_head *ws, struct address_space *mapping,
 	unsigned long len = *total_out;
 	const unsigned long nr_dest_pages = *out_pages;
 	unsigned long max_out = nr_dest_pages * PAGE_SIZE;
-	ZSTD_parameters params = zstd_get_btrfs_parameters(workspace->req_level,
+	struct zstd_parameters params = zstd_get_btrfs_parameters(workspace->req_level,
 							   len);
 
 	*out_pages = 0;
@@ -389,10 +389,10 @@ int zstd_compress_pages(struct list_head *ws, struct address_space *mapping,
 	*total_in = 0;
 
 	/* Initialize the stream */
-	stream = ZSTD_initCStream(params, len, workspace->mem,
+	stream = zstd_init_cstream(&params, len, workspace->mem,
 			workspace->size);
 	if (!stream) {
-		pr_warn("BTRFS: ZSTD_initCStream failed\n");
+		pr_warn("BTRFS: zstd_init_cstream failed\n");
 		ret = -EIO;
 		goto out;
 	}
@@ -418,11 +418,11 @@ int zstd_compress_pages(struct list_head *ws, struct address_space *mapping,
 	while (1) {
 		size_t ret2;
 
-		ret2 = ZSTD_compressStream(stream, &workspace->out_buf,
+		ret2 = zstd_compress_stream(stream, &workspace->out_buf,
 				&workspace->in_buf);
-		if (ZSTD_isError(ret2)) {
-			pr_debug("BTRFS: ZSTD_compressStream returned %d\n",
-					ZSTD_getErrorCode(ret2));
+		if (zstd_is_error(ret2)) {
+			pr_debug("BTRFS: zstd_compress_stream returned %d\n",
+					zstd_get_error_code(ret2));
 			ret = -EIO;
 			goto out;
 		}
@@ -487,10 +487,10 @@ int zstd_compress_pages(struct list_head *ws, struct address_space *mapping,
 	while (1) {
 		size_t ret2;
 
-		ret2 = ZSTD_endStream(stream, &workspace->out_buf);
-		if (ZSTD_isError(ret2)) {
-			pr_debug("BTRFS: ZSTD_endStream returned %d\n",
-					ZSTD_getErrorCode(ret2));
+		ret2 = zstd_end_stream(stream, &workspace->out_buf);
+		if (zstd_is_error(ret2)) {
+			pr_debug("BTRFS: zstd_end_stream returned %d\n",
+					zstd_get_error_code(ret2));
 			ret = -EIO;
 			goto out;
 		}
@@ -550,17 +550,17 @@ int zstd_decompress_bio(struct list_head *ws, struct compressed_bio *cb)
 	u64 disk_start = cb->start;
 	struct bio *orig_bio = cb->orig_bio;
 	size_t srclen = cb->compressed_len;
-	ZSTD_DStream *stream;
+	zstd_dstream *stream;
 	int ret = 0;
 	unsigned long page_in_index = 0;
 	unsigned long total_pages_in = DIV_ROUND_UP(srclen, PAGE_SIZE);
 	unsigned long buf_start;
 	unsigned long total_out = 0;
 
-	stream = ZSTD_initDStream(
+	stream = zstd_init_dstream(
 			ZSTD_BTRFS_MAX_INPUT, workspace->mem, workspace->size);
 	if (!stream) {
-		pr_debug("BTRFS: ZSTD_initDStream failed\n");
+		pr_debug("BTRFS: zstd_init_dstream failed\n");
 		ret = -EIO;
 		goto done;
 	}
@@ -576,11 +576,11 @@ int zstd_decompress_bio(struct list_head *ws, struct compressed_bio *cb)
 	while (1) {
 		size_t ret2;
 
-		ret2 = ZSTD_decompressStream(stream, &workspace->out_buf,
+		ret2 = zstd_decompress_stream(stream, &workspace->out_buf,
 				&workspace->in_buf);
-		if (ZSTD_isError(ret2)) {
-			pr_debug("BTRFS: ZSTD_decompressStream returned %d\n",
-					ZSTD_getErrorCode(ret2));
+		if (zstd_is_error(ret2)) {
+			pr_debug("BTRFS: zstd_decompress_stream returned %d\n",
+					zstd_get_error_code(ret2));
 			ret = -EIO;
 			goto done;
 		}
@@ -626,17 +626,17 @@ int zstd_decompress(struct list_head *ws, unsigned char *data_in,
 		size_t destlen)
 {
 	struct workspace *workspace = list_entry(ws, struct workspace, list);
-	ZSTD_DStream *stream;
+	zstd_dstream *stream;
 	int ret = 0;
 	size_t ret2;
 	unsigned long total_out = 0;
 	unsigned long pg_offset = 0;
 	char *kaddr;
 
-	stream = ZSTD_initDStream(
+	stream = zstd_init_dstream(
 			ZSTD_BTRFS_MAX_INPUT, workspace->mem, workspace->size);
 	if (!stream) {
-		pr_warn("BTRFS: ZSTD_initDStream failed\n");
+		pr_warn("BTRFS: zstd_init_dstream failed\n");
 		ret = -EIO;
 		goto finish;
 	}
@@ -660,15 +660,15 @@ int zstd_decompress(struct list_head *ws, unsigned char *data_in,
 
 		/* Check if the frame is over and we still need more input */
 		if (ret2 == 0) {
-			pr_debug("BTRFS: ZSTD_decompressStream ended early\n");
+			pr_debug("BTRFS: zstd_decompress_stream ended early\n");
 			ret = -EIO;
 			goto finish;
 		}
-		ret2 = ZSTD_decompressStream(stream, &workspace->out_buf,
+		ret2 = zstd_decompress_stream(stream, &workspace->out_buf,
 				&workspace->in_buf);
-		if (ZSTD_isError(ret2)) {
-			pr_debug("BTRFS: ZSTD_decompressStream returned %d\n",
-					ZSTD_getErrorCode(ret2));
+		if (zstd_is_error(ret2)) {
+			pr_debug("BTRFS: zstd_decompress_stream returned %d\n",
+					zstd_get_error_code(ret2));
 			ret = -EIO;
 			goto finish;
 		}
diff --git a/fs/f2fs/compress.c b/fs/f2fs/compress.c
index 14262e0f1cd6..6edca6934229 100644
--- a/fs/f2fs/compress.c
+++ b/fs/f2fs/compress.c
@@ -321,22 +321,22 @@ static const struct f2fs_compress_ops f2fs_lz4_ops = {
 
 static int zstd_init_compress_ctx(struct compress_ctx *cc)
 {
-	ZSTD_parameters params;
-	ZSTD_CStream *stream;
+	struct zstd_parameters params;
+	zstd_cstream *stream;
 	void *workspace;
 	unsigned int workspace_size;
 
-	params = ZSTD_getParams(F2FS_ZSTD_DEFAULT_CLEVEL, cc->rlen, 0);
-	workspace_size = ZSTD_CStreamWorkspaceBound(params.cParams);
+	params = zstd_get_params(F2FS_ZSTD_DEFAULT_CLEVEL, cc->rlen);
+	workspace_size = zstd_cstream_workspace_bound(&params.cparams);
 
 	workspace = f2fs_kvmalloc(F2FS_I_SB(cc->inode),
 					workspace_size, GFP_NOFS);
 	if (!workspace)
 		return -ENOMEM;
 
-	stream = ZSTD_initCStream(params, 0, workspace, workspace_size);
+	stream = zstd_init_cstream(&params, 0, workspace, workspace_size);
 	if (!stream) {
-		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_initCStream failed\n",
+		printk_ratelimited("%sF2FS-fs (%s): %s zstd_init_cstream failed\n",
 				KERN_ERR, F2FS_I_SB(cc->inode)->sb->s_id,
 				__func__);
 		kvfree(workspace);
@@ -359,9 +359,9 @@ static void zstd_destroy_compress_ctx(struct compress_ctx *cc)
 
 static int zstd_compress_pages(struct compress_ctx *cc)
 {
-	ZSTD_CStream *stream = cc->private2;
-	ZSTD_inBuffer inbuf;
-	ZSTD_outBuffer outbuf;
+	zstd_cstream *stream = cc->private2;
+	struct zstd_in_buffer inbuf;
+	struct zstd_out_buffer outbuf;
 	int src_size = cc->rlen;
 	int dst_size = src_size - PAGE_SIZE - COMPRESS_HEADER_SIZE;
 	int ret;
@@ -374,19 +374,19 @@ static int zstd_compress_pages(struct compress_ctx *cc)
 	outbuf.dst = cc->cbuf->cdata;
 	outbuf.size = dst_size;
 
-	ret = ZSTD_compressStream(stream, &outbuf, &inbuf);
-	if (ZSTD_isError(ret)) {
-		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_compressStream failed, ret: %d\n",
+	ret = zstd_compress_stream(stream, &outbuf, &inbuf);
+	if (zstd_is_error(ret)) {
+		printk_ratelimited("%sF2FS-fs (%s): %s zstd_compress_stream failed, ret: %d\n",
 				KERN_ERR, F2FS_I_SB(cc->inode)->sb->s_id,
-				__func__, ZSTD_getErrorCode(ret));
+				__func__, zstd_get_error_code(ret));
 		return -EIO;
 	}
 
-	ret = ZSTD_endStream(stream, &outbuf);
-	if (ZSTD_isError(ret)) {
-		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_endStream returned %d\n",
+	ret = zstd_end_stream(stream, &outbuf);
+	if (zstd_is_error(ret)) {
+		printk_ratelimited("%sF2FS-fs (%s): %s zstd_end_stream returned %d\n",
 				KERN_ERR, F2FS_I_SB(cc->inode)->sb->s_id,
-				__func__, ZSTD_getErrorCode(ret));
+				__func__, zstd_get_error_code(ret));
 		return -EIO;
 	}
 
@@ -403,22 +403,22 @@ static int zstd_compress_pages(struct compress_ctx *cc)
 
 static int zstd_init_decompress_ctx(struct decompress_io_ctx *dic)
 {
-	ZSTD_DStream *stream;
+	zstd_dstream *stream;
 	void *workspace;
 	unsigned int workspace_size;
 	unsigned int max_window_size =
 			MAX_COMPRESS_WINDOW_SIZE(dic->log_cluster_size);
 
-	workspace_size = ZSTD_DStreamWorkspaceBound(max_window_size);
+	workspace_size = zstd_dstream_workspace_bound(max_window_size);
 
 	workspace = f2fs_kvmalloc(F2FS_I_SB(dic->inode),
 					workspace_size, GFP_NOFS);
 	if (!workspace)
 		return -ENOMEM;
 
-	stream = ZSTD_initDStream(max_window_size, workspace, workspace_size);
+	stream = zstd_init_dstream(max_window_size, workspace, workspace_size);
 	if (!stream) {
-		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_initDStream failed\n",
+		printk_ratelimited("%sF2FS-fs (%s): %s zstd_init_dstream failed\n",
 				KERN_ERR, F2FS_I_SB(dic->inode)->sb->s_id,
 				__func__);
 		kvfree(workspace);
@@ -440,9 +440,9 @@ static void zstd_destroy_decompress_ctx(struct decompress_io_ctx *dic)
 
 static int zstd_decompress_pages(struct decompress_io_ctx *dic)
 {
-	ZSTD_DStream *stream = dic->private2;
-	ZSTD_inBuffer inbuf;
-	ZSTD_outBuffer outbuf;
+	zstd_dstream *stream = dic->private2;
+	struct zstd_in_buffer inbuf;
+	struct zstd_out_buffer outbuf;
 	int ret;
 
 	inbuf.pos = 0;
@@ -453,11 +453,11 @@ static int zstd_decompress_pages(struct decompress_io_ctx *dic)
 	outbuf.dst = dic->rbuf;
 	outbuf.size = dic->rlen;
 
-	ret = ZSTD_decompressStream(stream, &outbuf, &inbuf);
-	if (ZSTD_isError(ret)) {
-		printk_ratelimited("%sF2FS-fs (%s): %s ZSTD_compressStream failed, ret: %d\n",
+	ret = zstd_decompress_stream(stream, &outbuf, &inbuf);
+	if (zstd_is_error(ret)) {
+		printk_ratelimited("%sF2FS-fs (%s): %s zstd_decompress_stream failed, ret: %d\n",
 				KERN_ERR, F2FS_I_SB(dic->inode)->sb->s_id,
-				__func__, ZSTD_getErrorCode(ret));
+				__func__, zstd_get_error_code(ret));
 		return -EIO;
 	}
 
diff --git a/fs/pstore/platform.c b/fs/pstore/platform.c
index 36714df37d5d..8a252e3faeb3 100644
--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -218,7 +218,7 @@ static int zbufsize_842(size_t size)
 #if IS_ENABLED(CONFIG_PSTORE_ZSTD_COMPRESS)
 static int zbufsize_zstd(size_t size)
 {
-	return ZSTD_compressBound(size);
+	return zstd_compress_bound(size);
 }
 #endif
 
diff --git a/fs/squashfs/zstd_wrapper.c b/fs/squashfs/zstd_wrapper.c
index b7cb1faa652d..149a9c5de6ec 100644
--- a/fs/squashfs/zstd_wrapper.c
+++ b/fs/squashfs/zstd_wrapper.c
@@ -34,7 +34,7 @@ static void *zstd_init(struct squashfs_sb_info *msblk, void *buff)
 		goto failed;
 	wksp->window_size = max_t(size_t,
 			msblk->block_size, SQUASHFS_METADATA_SIZE);
-	wksp->mem_size = ZSTD_DStreamWorkspaceBound(wksp->window_size);
+	wksp->mem_size = zstd_dstream_workspace_bound(wksp->window_size);
 	wksp->mem = vmalloc(wksp->mem_size);
 	if (wksp->mem == NULL)
 		goto failed;
@@ -63,15 +63,15 @@ static int zstd_uncompress(struct squashfs_sb_info *msblk, void *strm,
 	struct squashfs_page_actor *output)
 {
 	struct workspace *wksp = strm;
-	ZSTD_DStream *stream;
+	zstd_dstream *stream;
 	size_t total_out = 0;
 	int error = 0;
-	ZSTD_inBuffer in_buf = { NULL, 0, 0 };
-	ZSTD_outBuffer out_buf = { NULL, 0, 0 };
+	struct zstd_in_buffer in_buf = { NULL, 0, 0 };
+	struct zstd_out_buffer out_buf = { NULL, 0, 0 };
 	struct bvec_iter_all iter_all = {};
 	struct bio_vec *bvec = bvec_init_iter_all(&iter_all);
 
-	stream = ZSTD_initDStream(wksp->window_size, wksp->mem, wksp->mem_size);
+	stream = zstd_init_dstream(wksp->window_size, wksp->mem, wksp->mem_size);
 
 	if (!stream) {
 		ERROR("Failed to initialize zstd decompressor\n");
@@ -116,14 +116,14 @@ static int zstd_uncompress(struct squashfs_sb_info *msblk, void *strm,
 		}
 
 		total_out -= out_buf.pos;
-		zstd_err = ZSTD_decompressStream(stream, &out_buf, &in_buf);
+		zstd_err = zstd_decompress_stream(stream, &out_buf, &in_buf);
 		total_out += out_buf.pos; /* add the additional data produced */
 		if (zstd_err == 0)
 			break;
 
-		if (ZSTD_isError(zstd_err)) {
+		if (zstd_is_error(zstd_err)) {
 			ERROR("zstd decompression error: %d\n",
-					(int)ZSTD_getErrorCode(zstd_err));
+					(int)zstd_get_error_code(zstd_err));
 			error = -EIO;
 			break;
 		}
diff --git a/include/linux/zstd.h b/include/linux/zstd.h
index 249575e2485f..71abce8f48f7 100644
--- a/include/linux/zstd.h
+++ b/include/linux/zstd.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (c) 2016-present, Yann Collet, Facebook, Inc.
  * All rights reserved.
@@ -14,1144 +15,444 @@
  * ("BSD").
  */
 
-#ifndef ZSTD_H
-#define ZSTD_H
-
-/* ======   Dependency   ======*/
-#include <linux/types.h>   /* size_t */
-
-
-/*-*****************************************************************************
- * Introduction
- *
- * zstd, short for Zstandard, is a fast lossless compression algorithm,
- * targeting real-time compression scenarios at zlib-level and better
- * compression ratios. The zstd compression library provides in-memory
- * compression and decompression functions. The library supports compression
- * levels from 1 up to ZSTD_maxCLevel() which is 22. Levels >= 20, labeled
- * ultra, should be used with caution, as they require more memory.
- * Compression can be done in:
- *  - a single step, reusing a context (described as Explicit memory management)
- *  - unbounded multiple steps (described as Streaming compression)
- * The compression ratio achievable on small data can be highly improved using
- * compression with a dictionary in:
- *  - a single step (described as Simple dictionary API)
- *  - a single step, reusing a dictionary (described as Fast dictionary API)
- ******************************************************************************/
-
-/*======  Helper functions  ======*/
+#ifndef LINUX_ZSTD_H
+#define LINUX_ZSTD_H
 
 /**
- * enum ZSTD_ErrorCode - zstd error codes
- *
- * Functions that return size_t can be checked for errors using ZSTD_isError()
- * and the ZSTD_ErrorCode can be extracted using ZSTD_getErrorCode().
+ * This is a kernel-style API that wraps the upstream zstd API, which cannot be
+ * used directly because the symbols aren't exported. It exposes the minimal
+ * functionality which is currently required by users of zstd in the kernel.
+ * Expose extra functions from lib/zstd/zstd.h as needed.
  */
-typedef enum {
-	ZSTD_error_no_error,
-	ZSTD_error_GENERIC,
-	ZSTD_error_prefix_unknown,
-	ZSTD_error_version_unsupported,
-	ZSTD_error_parameter_unknown,
-	ZSTD_error_frameParameter_unsupported,
-	ZSTD_error_frameParameter_unsupportedBy32bits,
-	ZSTD_error_frameParameter_windowTooLarge,
-	ZSTD_error_compressionParameter_unsupported,
-	ZSTD_error_init_missing,
-	ZSTD_error_memory_allocation,
-	ZSTD_error_stage_wrong,
-	ZSTD_error_dstSize_tooSmall,
-	ZSTD_error_srcSize_wrong,
-	ZSTD_error_corruption_detected,
-	ZSTD_error_checksum_wrong,
-	ZSTD_error_tableLog_tooLarge,
-	ZSTD_error_maxSymbolValue_tooLarge,
-	ZSTD_error_maxSymbolValue_tooSmall,
-	ZSTD_error_dictionary_corrupted,
-	ZSTD_error_dictionary_wrong,
-	ZSTD_error_dictionaryCreation_failed,
-	ZSTD_error_maxCode
-} ZSTD_ErrorCode;
 
-/**
- * ZSTD_maxCLevel() - maximum compression level available
- *
- * Return: Maximum compression level available.
- */
-int ZSTD_maxCLevel(void);
-/**
- * ZSTD_compressBound() - maximum compressed size in worst case scenario
- * @srcSize: The size of the data to compress.
- *
- * Return:   The maximum compressed size in the worst case scenario.
- */
-size_t ZSTD_compressBound(size_t srcSize);
-/**
- * ZSTD_isError() - tells if a size_t function result is an error code
- * @code:  The function result to check for error.
- *
- * Return: Non-zero iff the code is an error.
- */
-static __attribute__((unused)) unsigned int ZSTD_isError(size_t code)
-{
-	return code > (size_t)-ZSTD_error_maxCode;
-}
-/**
- * ZSTD_getErrorCode() - translates an error function result to a ZSTD_ErrorCode
- * @functionResult: The result of a function for which ZSTD_isError() is true.
- *
- * Return:          The ZSTD_ErrorCode corresponding to the functionResult or 0
- *                  if the functionResult isn't an error.
- */
-static __attribute__((unused)) ZSTD_ErrorCode ZSTD_getErrorCode(
-	size_t functionResult)
-{
-	if (!ZSTD_isError(functionResult))
-		return (ZSTD_ErrorCode)0;
-	return (ZSTD_ErrorCode)(0 - functionResult);
-}
+/* ======   Dependency   ====== */
+#include <linux/types.h>
 
+/* ======   Helper Functions   ====== */
 /**
- * enum ZSTD_strategy - zstd compression search strategy
+ * zstd_compress_bound() - maximum compressed size in worst case scenario
+ * @src_size: The size of the data to compress.
  *
- * From faster to stronger.
- */
-typedef enum {
-	ZSTD_fast,
-	ZSTD_dfast,
-	ZSTD_greedy,
-	ZSTD_lazy,
-	ZSTD_lazy2,
-	ZSTD_btlazy2,
-	ZSTD_btopt,
-	ZSTD_btopt2
-} ZSTD_strategy;
-
-/**
- * struct ZSTD_compressionParameters - zstd compression parameters
- * @windowLog:    Log of the largest match distance. Larger means more
- *                compression, and more memory needed during decompression.
- * @chainLog:     Fully searched segment. Larger means more compression, slower,
- *                and more memory (useless for fast).
- * @hashLog:      Dispatch table. Larger means more compression,
- *                slower, and more memory.
- * @searchLog:    Number of searches. Larger means more compression and slower.
- * @searchLength: Match length searched. Larger means faster decompression,
- *                sometimes less compression.
- * @targetLength: Acceptable match size for optimal parser (only). Larger means
- *                more compression, and slower.
- * @strategy:     The zstd compression strategy.
+ * Return:    The maximum compressed size in the worst case scenario.
  */
-typedef struct {
-	unsigned int windowLog;
-	unsigned int chainLog;
-	unsigned int hashLog;
-	unsigned int searchLog;
-	unsigned int searchLength;
-	unsigned int targetLength;
-	ZSTD_strategy strategy;
-} ZSTD_compressionParameters;
+size_t zstd_compress_bound(size_t src_size);
 
 /**
- * struct ZSTD_frameParameters - zstd frame parameters
- * @contentSizeFlag: Controls whether content size will be present in the frame
- *                   header (when known).
- * @checksumFlag:    Controls whether a 32-bit checksum is generated at the end
- *                   of the frame for error detection.
- * @noDictIDFlag:    Controls whether dictID will be saved into the frame header
- *                   when using dictionary compression.
+ * zstd_is_error() - tells if a size_t function result is an error code
+ * @code:  The function result to check for error.
  *
- * The default value is all fields set to 0.
- */
-typedef struct {
-	unsigned int contentSizeFlag;
-	unsigned int checksumFlag;
-	unsigned int noDictIDFlag;
-} ZSTD_frameParameters;
-
-/**
- * struct ZSTD_parameters - zstd parameters
- * @cParams: The compression parameters.
- * @fParams: The frame parameters.
+ * Return: Non-zero iff the code is an error.
  */
-typedef struct {
-	ZSTD_compressionParameters cParams;
-	ZSTD_frameParameters fParams;
-} ZSTD_parameters;
+unsigned int zstd_is_error(size_t code);
 
 /**
- * ZSTD_getCParams() - returns ZSTD_compressionParameters for selected level
- * @compressionLevel: The compression level from 1 to ZSTD_maxCLevel().
- * @estimatedSrcSize: The estimated source size to compress or 0 if unknown.
- * @dictSize:         The dictionary size or 0 if a dictionary isn't being used.
+ * zstd_get_error_code() - translates an error function result to an error code
+ * @code:  The function result for which zstd_is_error(code) is true.
  *
- * Return:            The selected ZSTD_compressionParameters.
+ * Return: A unique error code for this error.
  */
-ZSTD_compressionParameters ZSTD_getCParams(int compressionLevel,
-	unsigned long long estimatedSrcSize, size_t dictSize);
+int zstd_get_error_code(size_t code);
 
 /**
- * ZSTD_getParams() - returns ZSTD_parameters for selected level
- * @compressionLevel: The compression level from 1 to ZSTD_maxCLevel().
- * @estimatedSrcSize: The estimated source size to compress or 0 if unknown.
- * @dictSize:         The dictionary size or 0 if a dictionary isn't being used.
+ * zstd_get_error_name() - translates an error function result to a string
+ * @code:  The function result for which zstd_is_error(code) is true.
  *
- * The same as ZSTD_getCParams() except also selects the default frame
- * parameters (all zero).
- *
- * Return:            The selected ZSTD_parameters.
+ * Return: An error string corresponding to the error code.
  */
-ZSTD_parameters ZSTD_getParams(int compressionLevel,
-	unsigned long long estimatedSrcSize, size_t dictSize);
-
-/*-*************************************
- * Explicit memory management
- **************************************/
+const char *zstd_get_error_name(size_t code);
 
-/**
- * ZSTD_CCtxWorkspaceBound() - amount of memory needed to initialize a ZSTD_CCtx
- * @cParams: The compression parameters to be used for compression.
- *
- * If multiple compression parameters might be used, the caller must call
- * ZSTD_CCtxWorkspaceBound() for each set of parameters and use the maximum
- * size.
- *
- * Return:   A lower bound on the size of the workspace that is passed to
- *           ZSTD_initCCtx().
- */
-size_t ZSTD_CCtxWorkspaceBound(ZSTD_compressionParameters cParams);
+/* ======   Parameter Selection   ====== */
 
 /**
- * struct ZSTD_CCtx - the zstd compression context
- *
- * When compressing many times it is recommended to allocate a context just once
- * and reuse it for each successive compression operation.
- */
-typedef struct ZSTD_CCtx_s ZSTD_CCtx;
-/**
- * ZSTD_initCCtx() - initialize a zstd compression context
- * @workspace:     The workspace to emplace the context into. It must outlive
- *                 the returned context.
- * @workspaceSize: The size of workspace. Use ZSTD_CCtxWorkspaceBound() to
- *                 determine how large the workspace must be.
+ * enum zstd_strategy - zstd compression search strategy
  *
- * Return:         A compression context emplaced into workspace.
+ * From faster to stronger.
  */
-ZSTD_CCtx *ZSTD_initCCtx(void *workspace, size_t workspaceSize);
-
-/**
- * ZSTD_compressCCtx() - compress src into dst
- * @ctx:         The context. Must have been initialized with a workspace at
- *               least as large as ZSTD_CCtxWorkspaceBound(params.cParams).
- * @dst:         The buffer to compress src into.
- * @dstCapacity: The size of the destination buffer. May be any size, but
- *               ZSTD_compressBound(srcSize) is guaranteed to be large enough.
- * @src:         The data to compress.
- * @srcSize:     The size of the data to compress.
- * @params:      The parameters to use for compression. See ZSTD_getParams().
+enum zstd_strategy {
+	zstd_fast,
+	zstd_dfast,
+	zstd_greedy,
+	zstd_lazy,
+	zstd_lazy2,
+	zstd_btlazy2,
+	zstd_btopt,
+	zstd_btopt2
+};
+
+/**
+ * struct zstd_compression_parameters - zstd compression parameters
+ * @window_log:    Log of the largest match distance. Larger means more
+ *                 compression, and more memory needed during decompression.
+ * @chain_log:     Fully searched segment. Larger means more compression,
+ *                 slower, and more memory (useless for fast).
+ * @hash_log:      Dispatch table. Larger means more compression,
+ *                 slower, and more memory.
+ * @search_log:    Number of searches. Larger means more compression and slower.
+ * @search_length: Match length searched. Larger means faster decompression,
+ *                 sometimes less compression.
+ * @target_length: Acceptable match size for optimal parser (only). Larger means
+ *                 more compression, and slower.
+ * @strategy:      The zstd compression strategy.
+ */
+struct zstd_compression_parameters {
+	unsigned int window_log;
+	unsigned int chain_log;
+	unsigned int hash_log;
+	unsigned int search_log;
+	unsigned int search_length;
+	unsigned int target_length;
+	enum zstd_strategy strategy;
+};
+
+/**
+ * struct zstd_frame_parameters - zstd frame parameters
+ * @content_size_flag: Controls whether content size will be present in the
+ *                     frame header (when known).
+ * @checksum_flag:     Controls whether a 32-bit checksum is generated at the
+ *                     end of the frame for error detection.
+ * @no_dict_id_flag:   Controls whether dictID will be saved into the frame
+ *                     header when using dictionary compression.
  *
- * Return:       The compressed size or an error, which can be checked using
- *               ZSTD_isError().
+ * The default value is all fields set to 0.
  */
-size_t ZSTD_compressCCtx(ZSTD_CCtx *ctx, void *dst, size_t dstCapacity,
-	const void *src, size_t srcSize, ZSTD_parameters params);
+struct zstd_frame_parameters {
+	unsigned int content_size_flag;
+	unsigned int checksum_flag;
+	unsigned int no_dict_id_flag;
+};
 
 /**
- * ZSTD_DCtxWorkspaceBound() - amount of memory needed to initialize a ZSTD_DCtx
- *
- * Return: A lower bound on the size of the workspace that is passed to
- *         ZSTD_initDCtx().
+ * struct zstd_parameters - zstd parameters
+ * @cparams: The compression parameters.
+ * @fparams: The frame parameters.
  */
-size_t ZSTD_DCtxWorkspaceBound(void);
+struct zstd_parameters {
+	struct zstd_compression_parameters cparams;
+	struct zstd_frame_parameters fparams;
+};
 
 /**
- * struct ZSTD_DCtx - the zstd decompression context
+ * zstd_get_params() - returns zstd_parameters for selected level
+ * @level:              The compression level
+ * @estimated_src_size: The estimated source size to compress or 0
+ *                      if unknown.
  *
- * When decompressing many times it is recommended to allocate a context just
- * once and reuse it for each successive decompression operation.
+ * Return:              The selected zstd_parameters.
  */
-typedef struct ZSTD_DCtx_s ZSTD_DCtx;
-/**
- * ZSTD_initDCtx() - initialize a zstd decompression context
- * @workspace:     The workspace to emplace the context into. It must outlive
- *                 the returned context.
- * @workspaceSize: The size of workspace. Use ZSTD_DCtxWorkspaceBound() to
- *                 determine how large the workspace must be.
- *
- * Return:         A decompression context emplaced into workspace.
- */
-ZSTD_DCtx *ZSTD_initDCtx(void *workspace, size_t workspaceSize);
+struct zstd_parameters zstd_get_params(int level,
+	unsigned long long estimated_src_size);
 
-/**
- * ZSTD_decompressDCtx() - decompress zstd compressed src into dst
- * @ctx:         The decompression context.
- * @dst:         The buffer to decompress src into.
- * @dstCapacity: The size of the destination buffer. Must be at least as large
- *               as the decompressed size. If the caller cannot upper bound the
- *               decompressed size, then it's better to use the streaming API.
- * @src:         The zstd compressed data to decompress. Multiple concatenated
- *               frames and skippable frames are allowed.
- * @srcSize:     The exact size of the data to decompress.
- *
- * Return:       The decompressed size or an error, which can be checked using
- *               ZSTD_isError().
- */
-size_t ZSTD_decompressDCtx(ZSTD_DCtx *ctx, void *dst, size_t dstCapacity,
-	const void *src, size_t srcSize);
+/* ======   Single-pass Compression   ====== */
 
-/*-************************
- * Simple dictionary API
- **************************/
+typedef struct ZSTD_CCtx_s zstd_cctx;
 
 /**
- * ZSTD_compress_usingDict() - compress src into dst using a dictionary
- * @ctx:         The context. Must have been initialized with a workspace at
- *               least as large as ZSTD_CCtxWorkspaceBound(params.cParams).
- * @dst:         The buffer to compress src into.
- * @dstCapacity: The size of the destination buffer. May be any size, but
- *               ZSTD_compressBound(srcSize) is guaranteed to be large enough.
- * @src:         The data to compress.
- * @srcSize:     The size of the data to compress.
- * @dict:        The dictionary to use for compression.
- * @dictSize:    The size of the dictionary.
- * @params:      The parameters to use for compression. See ZSTD_getParams().
+ * zstd_cctx_workspace_bound() - max memory needed to initialize a zstd_cctx
+ * @parameters: The compression parameters to be used.
  *
- * Compression using a predefined dictionary. The same dictionary must be used
- * during decompression.
- *
- * Return:       The compressed size or an error, which can be checked using
- *               ZSTD_isError().
- */
-size_t ZSTD_compress_usingDict(ZSTD_CCtx *ctx, void *dst, size_t dstCapacity,
-	const void *src, size_t srcSize, const void *dict, size_t dictSize,
-	ZSTD_parameters params);
-
-/**
- * ZSTD_decompress_usingDict() - decompress src into dst using a dictionary
- * @ctx:         The decompression context.
- * @dst:         The buffer to decompress src into.
- * @dstCapacity: The size of the destination buffer. Must be at least as large
- *               as the decompressed size. If the caller cannot upper bound the
- *               decompressed size, then it's better to use the streaming API.
- * @src:         The zstd compressed data to decompress. Multiple concatenated
- *               frames and skippable frames are allowed.
- * @srcSize:     The exact size of the data to decompress.
- * @dict:        The dictionary to use for decompression. The same dictionary
- *               must've been used to compress the data.
- * @dictSize:    The size of the dictionary.
+ * If multiple compression parameters might be used, the caller must call
+ * zstd_cctx_workspace_bound() for each set of parameters and use the maximum
+ * size.
  *
- * Return:       The decompressed size or an error, which can be checked using
- *               ZSTD_isError().
+ * Return:      A lower bound on the size of the workspace that is passed to
+ *              zstd_init_cctx().
  */
-size_t ZSTD_decompress_usingDict(ZSTD_DCtx *ctx, void *dst, size_t dstCapacity,
-	const void *src, size_t srcSize, const void *dict, size_t dictSize);
-
-/*-**************************
- * Fast dictionary API
- ***************************/
+size_t zstd_cctx_workspace_bound(
+	const struct zstd_compression_parameters *parameters);
 
 /**
- * ZSTD_CDictWorkspaceBound() - memory needed to initialize a ZSTD_CDict
- * @cParams: The compression parameters to be used for compression.
+ * zstd_init_cctx() - initialize a zstd compression context
+ * @workspace:      The workspace to emplace the context into. It must outlive
+ *                  the returned context.
+ * @workspace_size: The size of workspace. Use zstd_cctx_workspace_bound() to
+ *                  determine how large the workspace must be.
  *
- * Return:   A lower bound on the size of the workspace that is passed to
- *           ZSTD_initCDict().
- */
-size_t ZSTD_CDictWorkspaceBound(ZSTD_compressionParameters cParams);
-
-/**
- * struct ZSTD_CDict - a digested dictionary to be used for compression
+ * Return:          A zstd compression context or NULL on error.
  */
-typedef struct ZSTD_CDict_s ZSTD_CDict;
+zstd_cctx *zstd_init_cctx(void *workspace, size_t workspace_size);
 
 /**
- * ZSTD_initCDict() - initialize a digested dictionary for compression
- * @dictBuffer:    The dictionary to digest. The buffer is referenced by the
- *                 ZSTD_CDict so it must outlive the returned ZSTD_CDict.
- * @dictSize:      The size of the dictionary.
- * @params:        The parameters to use for compression. See ZSTD_getParams().
- * @workspace:     The workspace. It must outlive the returned ZSTD_CDict.
- * @workspaceSize: The workspace size. Must be at least
- *                 ZSTD_CDictWorkspaceBound(params.cParams).
- *
- * When compressing multiple messages / blocks with the same dictionary it is
- * recommended to load it just once. The ZSTD_CDict merely references the
- * dictBuffer, so it must outlive the returned ZSTD_CDict.
+ * zstd_compress_cctx() - compress src into dst with the initialized parameters
+ * @cctx:         The context. Must have been initialized with zstd_init_cctx().
+ * @dst:          The buffer to compress src into.
+ * @dst_capacity: The size of the destination buffer. May be any size, but
+ *                ZSTD_compressBound(srcSize) is guaranteed to be large enough.
+ * @src:          The data to compress.
+ * @src_size:     The size of the data to compress.
+ * @parameters:   The compression parameters to be used.
  *
- * Return:         The digested dictionary emplaced into workspace.
+ * Return:        The compressed size or an error, which can be checked using
+ *                zstd_is_error().
  */
-ZSTD_CDict *ZSTD_initCDict(const void *dictBuffer, size_t dictSize,
-	ZSTD_parameters params, void *workspace, size_t workspaceSize);
+size_t zstd_compress_cctx(zstd_cctx *cctx, void *dst, size_t dst_capacity,
+	const void *src, size_t src_size, const struct zstd_parameters *parameters);
 
-/**
- * ZSTD_compress_usingCDict() - compress src into dst using a ZSTD_CDict
- * @ctx:         The context. Must have been initialized with a workspace at
- *               least as large as ZSTD_CCtxWorkspaceBound(cParams) where
- *               cParams are the compression parameters used to initialize the
- *               cdict.
- * @dst:         The buffer to compress src into.
- * @dstCapacity: The size of the destination buffer. May be any size, but
- *               ZSTD_compressBound(srcSize) is guaranteed to be large enough.
- * @src:         The data to compress.
- * @srcSize:     The size of the data to compress.
- * @cdict:       The digested dictionary to use for compression.
- * @params:      The parameters to use for compression. See ZSTD_getParams().
- *
- * Compression using a digested dictionary. The same dictionary must be used
- * during decompression.
- *
- * Return:       The compressed size or an error, which can be checked using
- *               ZSTD_isError().
- */
-size_t ZSTD_compress_usingCDict(ZSTD_CCtx *cctx, void *dst, size_t dstCapacity,
-	const void *src, size_t srcSize, const ZSTD_CDict *cdict);
+/* ======   Single-pass Decompression   ====== */
 
+typedef struct ZSTD_DCtx_s zstd_dctx;
 
 /**
- * ZSTD_DDictWorkspaceBound() - memory needed to initialize a ZSTD_DDict
+ * zstd_dctx_workspace_bound() - max memory needed to initialize a zstd_dctx
  *
- * Return:  A lower bound on the size of the workspace that is passed to
- *          ZSTD_initDDict().
- */
-size_t ZSTD_DDictWorkspaceBound(void);
-
-/**
- * struct ZSTD_DDict - a digested dictionary to be used for decompression
+ * Return: A lower bound on the size of the workspace that is passed to
+ *         zstd_init_dctx().
  */
-typedef struct ZSTD_DDict_s ZSTD_DDict;
+size_t zstd_dctx_workspace_bound(void);
 
 /**
- * ZSTD_initDDict() - initialize a digested dictionary for decompression
- * @dictBuffer:    The dictionary to digest. The buffer is referenced by the
- *                 ZSTD_DDict so it must outlive the returned ZSTD_DDict.
- * @dictSize:      The size of the dictionary.
- * @workspace:     The workspace. It must outlive the returned ZSTD_DDict.
- * @workspaceSize: The workspace size. Must be at least
- *                 ZSTD_DDictWorkspaceBound().
- *
- * When decompressing multiple messages / blocks with the same dictionary it is
- * recommended to load it just once. The ZSTD_DDict merely references the
- * dictBuffer, so it must outlive the returned ZSTD_DDict.
+ * zstd_init_dctx() - initialize a zstd decompression context
+ * @workspace:      The workspace to emplace the context into. It must outlive
+ *                  the returned context.
+ * @workspace_size: The size of workspace. Use zstd_dctx_workspace_bound() to
+ *                  determine how large the workspace must be.
  *
- * Return:         The digested dictionary emplaced into workspace.
+ * Return:          A zstd decompression context or NULL on error.
  */
-ZSTD_DDict *ZSTD_initDDict(const void *dictBuffer, size_t dictSize,
-	void *workspace, size_t workspaceSize);
+zstd_dctx *zstd_init_dctx(void *workspace, size_t workspace_size);
 
 /**
- * ZSTD_decompress_usingDDict() - decompress src into dst using a ZSTD_DDict
- * @ctx:         The decompression context.
- * @dst:         The buffer to decompress src into.
- * @dstCapacity: The size of the destination buffer. Must be at least as large
- *               as the decompressed size. If the caller cannot upper bound the
- *               decompressed size, then it's better to use the streaming API.
- * @src:         The zstd compressed data to decompress. Multiple concatenated
- *               frames and skippable frames are allowed.
- * @srcSize:     The exact size of the data to decompress.
- * @ddict:       The digested dictionary to use for decompression. The same
- *               dictionary must've been used to compress the data.
+ * zstd_decompress_dctx() - decompress zstd compressed src into dst
+ * @dctx:         The decompression context.
+ * @dst:          The buffer to decompress src into.
+ * @dst_capacity: The size of the destination buffer. Must be at least as large
+ *                as the decompressed size. If the caller cannot upper bound the
+ *                decompressed size, then it's better to use the streaming API.
+ * @src:          The zstd compressed data to decompress. Multiple concatenated
+ *                frames and skippable frames are allowed.
+ * @src_size:     The exact size of the data to decompress.
  *
- * Return:       The decompressed size or an error, which can be checked using
- *               ZSTD_isError().
+ * Return:        The decompressed size or an error, which can be checked using
+ *                zstd_is_error().
  */
-size_t ZSTD_decompress_usingDDict(ZSTD_DCtx *dctx, void *dst,
-	size_t dstCapacity, const void *src, size_t srcSize,
-	const ZSTD_DDict *ddict);
-
+size_t zstd_decompress_dctx(zstd_dctx *dctx, void *dst, size_t dst_capacity,
+	const void *src, size_t src_size);
 
-/*-**************************
- * Streaming
- ***************************/
+/* ======   Streaming Buffers   ====== */
 
 /**
- * struct ZSTD_inBuffer - input buffer for streaming
+ * struct zstd_in_buffer - input buffer for streaming
  * @src:  Start of the input buffer.
  * @size: Size of the input buffer.
  * @pos:  Position where reading stopped. Will be updated.
  *        Necessarily 0 <= pos <= size.
  */
-typedef struct ZSTD_inBuffer_s {
+struct zstd_in_buffer {
 	const void *src;
 	size_t size;
 	size_t pos;
-} ZSTD_inBuffer;
+};
 
 /**
- * struct ZSTD_outBuffer - output buffer for streaming
+ * struct zstd_out_buffer - output buffer for streaming
  * @dst:  Start of the output buffer.
  * @size: Size of the output buffer.
  * @pos:  Position where writing stopped. Will be updated.
  *        Necessarily 0 <= pos <= size.
  */
-typedef struct ZSTD_outBuffer_s {
+struct zstd_out_buffer {
 	void *dst;
 	size_t size;
 	size_t pos;
-} ZSTD_outBuffer;
-
+};
 
+/* ======   Streaming Compression   ====== */
 
-/*-*****************************************************************************
- * Streaming compression - HowTo
- *
- * A ZSTD_CStream object is required to track streaming operation.
- * Use ZSTD_initCStream() to initialize a ZSTD_CStream object.
- * ZSTD_CStream objects can be reused multiple times on consecutive compression
- * operations. It is recommended to re-use ZSTD_CStream in situations where many
- * streaming operations will be achieved consecutively. Use one separate
- * ZSTD_CStream per thread for parallel execution.
- *
- * Use ZSTD_compressStream() repetitively to consume input stream.
- * The function will automatically update both `pos` fields.
- * Note that it may not consume the entire input, in which case `pos < size`,
- * and it's up to the caller to present again remaining data.
- * It returns a hint for the preferred number of bytes to use as an input for
- * the next function call.
- *
- * At any moment, it's possible to flush whatever data remains within internal
- * buffer, using ZSTD_flushStream(). `output->pos` will be updated. There might
- * still be some content left within the internal buffer if `output->size` is
- * too small. It returns the number of bytes left in the internal buffer and
- * must be called until it returns 0.
- *
- * ZSTD_endStream() instructs to finish a frame. It will perform a flush and
- * write frame epilogue. The epilogue is required for decoders to consider a
- * frame completed. Similar to ZSTD_flushStream(), it may not be able to flush
- * the full content if `output->size` is too small. In which case, call again
- * ZSTD_endStream() to complete the flush. It returns the number of bytes left
- * in the internal buffer and must be called until it returns 0.
- ******************************************************************************/
+typedef struct ZSTD_CStream_s zstd_cstream;
 
 /**
- * ZSTD_CStreamWorkspaceBound() - memory needed to initialize a ZSTD_CStream
- * @cParams: The compression parameters to be used for compression.
+ * zstd_cstream_workspace_bound() - memory needed to initialize a zstd_cstream
+ * @cparams: The compression parameters to be used for compression.
  *
  * Return:   A lower bound on the size of the workspace that is passed to
- *           ZSTD_initCStream() and ZSTD_initCStream_usingCDict().
- */
-size_t ZSTD_CStreamWorkspaceBound(ZSTD_compressionParameters cParams);
-
-/**
- * struct ZSTD_CStream - the zstd streaming compression context
- */
-typedef struct ZSTD_CStream_s ZSTD_CStream;
-
-/*===== ZSTD_CStream management functions =====*/
-/**
- * ZSTD_initCStream() - initialize a zstd streaming compression context
- * @params:         The zstd compression parameters.
- * @pledgedSrcSize: If params.fParams.contentSizeFlag == 1 then the caller must
- *                  pass the source size (zero means empty source). Otherwise,
- *                  the caller may optionally pass the source size, or zero if
- *                  unknown.
- * @workspace:      The workspace to emplace the context into. It must outlive
- *                  the returned context.
- * @workspaceSize:  The size of workspace.
- *                  Use ZSTD_CStreamWorkspaceBound(params.cParams) to determine
- *                  how large the workspace must be.
- *
- * Return:          The zstd streaming compression context.
+ *           zstd_init_cstream().
  */
-ZSTD_CStream *ZSTD_initCStream(ZSTD_parameters params,
-	unsigned long long pledgedSrcSize, void *workspace,
-	size_t workspaceSize);
+size_t zstd_cstream_workspace_bound(
+	const struct zstd_compression_parameters *cparams);
 
 /**
- * ZSTD_initCStream_usingCDict() - initialize a streaming compression context
- * @cdict:          The digested dictionary to use for compression.
- * @pledgedSrcSize: Optionally the source size, or zero if unknown.
- * @workspace:      The workspace to emplace the context into. It must outlive
- *                  the returned context.
- * @workspaceSize:  The size of workspace. Call ZSTD_CStreamWorkspaceBound()
- *                  with the cParams used to initialize the cdict to determine
- *                  how large the workspace must be.
+ * zstd_init_cstream() - initialize a zstd streaming compression context
+ * @parameters        The zstd parameters to use for compression.
+ * @pledged_src_size: If params.fParams.contentSizeFlag == 1 then the caller
+ *                    must pass the source size (zero means empty source).
+ *                    Otherwise, the caller may optionally pass the source
+ *                    size, or zero if unknown.
+ * @workspace:        The workspace to emplace the context into. It must outlive
+ *                    the returned context.
+ * @workspace_size:   The size of workspace.
+ *                    Use zstd_cstream_workspace_bound(params->cparams) to
+ *                    determine how large the workspace must be.
  *
- * Return:          The zstd streaming compression context.
+ * Return:            The zstd streaming compression context or NULL on error.
  */
-ZSTD_CStream *ZSTD_initCStream_usingCDict(const ZSTD_CDict *cdict,
-	unsigned long long pledgedSrcSize, void *workspace,
-	size_t workspaceSize);
+zstd_cstream *zstd_init_cstream(const struct zstd_parameters *parameters,
+	unsigned long long pledged_src_size, void *workspace, size_t workspace_size);
 
-/*===== Streaming compression functions =====*/
 /**
- * ZSTD_resetCStream() - reset the context using parameters from creation
- * @zcs:            The zstd streaming compression context to reset.
- * @pledgedSrcSize: Optionally the source size, or zero if unknown.
+ * zstd_reset_cstream() - reset the context using parameters from creation
+ * @cstream:          The zstd streaming compression context to reset.
+ * @pledged_src_size: Optionally the source size, or zero if unknown.
  *
  * Resets the context using the parameters from creation. Skips dictionary
- * loading, since it can be reused. If `pledgedSrcSize` is non-zero the frame
+ * loading, since it can be reused. If `pledged_src_size` is non-zero the frame
  * content size is always written into the frame header.
  *
- * Return:          Zero or an error, which can be checked using ZSTD_isError().
+ * Return:            Zero or an error, which can be checked using
+ *                    zstd_is_error().
  */
-size_t ZSTD_resetCStream(ZSTD_CStream *zcs, unsigned long long pledgedSrcSize);
+size_t zstd_reset_cstream(zstd_cstream *cstream,
+	unsigned long long pledged_src_size);
+
 /**
- * ZSTD_compressStream() - streaming compress some of input into output
- * @zcs:    The zstd streaming compression context.
- * @output: Destination buffer. `output->pos` is updated to indicate how much
- *          compressed data was written.
- * @input:  Source buffer. `input->pos` is updated to indicate how much data was
- *          read. Note that it may not consume the entire input, in which case
- *          `input->pos < input->size`, and it's up to the caller to present
- *          remaining data again.
+ * zstd_compress_stream() - streaming compress some of input into output
+ * @cstream: The zstd streaming compression context.
+ * @output:  Destination buffer. `output->pos` is updated to indicate how much
+ *           compressed data was written.
+ * @input:   Source buffer. `input->pos` is updated to indicate how much data
+ *           was read. Note that it may not consume the entire input, in which
+ *           case `input->pos < input->size`, and it's up to the caller to
+ *           present remaining data again.
  *
  * The `input` and `output` buffers may be any size. Guaranteed to make some
  * forward progress if `input` and `output` are not empty.
  *
- * Return:  A hint for the number of bytes to use as the input for the next
- *          function call or an error, which can be checked using
- *          ZSTD_isError().
+ * Return:   A hint for the number of bytes to use as the input for the next
+ *           function call or an error, which can be checked using
+ *           zstd_is_error().
  */
-size_t ZSTD_compressStream(ZSTD_CStream *zcs, ZSTD_outBuffer *output,
-	ZSTD_inBuffer *input);
+size_t zstd_compress_stream(zstd_cstream *cstream,
+	struct zstd_out_buffer *output, struct zstd_in_buffer *input);
+
 /**
- * ZSTD_flushStream() - flush internal buffers into output
- * @zcs:    The zstd streaming compression context.
- * @output: Destination buffer. `output->pos` is updated to indicate how much
- *          compressed data was written.
+ * zstd_flush_stream() - flush internal buffers into output
+ * @cstream: The zstd streaming compression context.
+ * @output:  Destination buffer. `output->pos` is updated to indicate how much
+ *           compressed data was written.
  *
- * ZSTD_flushStream() must be called until it returns 0, meaning all the data
- * has been flushed. Since ZSTD_flushStream() causes a block to be ended,
+ * zstd_flush_stream() must be called until it returns 0, meaning all the data
+ * has been flushed. Since zstd_flush_stream() causes a block to be ended,
  * calling it too often will degrade the compression ratio.
  *
- * Return:  The number of bytes still present within internal buffers or an
- *          error, which can be checked using ZSTD_isError().
- */
-size_t ZSTD_flushStream(ZSTD_CStream *zcs, ZSTD_outBuffer *output);
-/**
- * ZSTD_endStream() - flush internal buffers into output and end the frame
- * @zcs:    The zstd streaming compression context.
- * @output: Destination buffer. `output->pos` is updated to indicate how much
- *          compressed data was written.
- *
- * ZSTD_endStream() must be called until it returns 0, meaning all the data has
- * been flushed and the frame epilogue has been written.
- *
- * Return:  The number of bytes still present within internal buffers or an
- *          error, which can be checked using ZSTD_isError().
+ * Return:   The number of bytes still present within internal buffers or an
+ *           error, which can be checked using zstd_is_error().
  */
-size_t ZSTD_endStream(ZSTD_CStream *zcs, ZSTD_outBuffer *output);
+size_t zstd_flush_stream(zstd_cstream *cstream, struct zstd_out_buffer *output);
 
 /**
- * ZSTD_CStreamInSize() - recommended size for the input buffer
- *
- * Return: The recommended size for the input buffer.
- */
-size_t ZSTD_CStreamInSize(void);
-/**
- * ZSTD_CStreamOutSize() - recommended size for the output buffer
+ * zstd_end_stream() - flush internal buffers into output and end the frame
+ * @cstream: The zstd streaming compression context.
+ * @output:  Destination buffer. `output->pos` is updated to indicate how much
+ *           compressed data was written.
  *
- * When the output buffer is at least this large, it is guaranteed to be large
- * enough to flush at least one complete compressed block.
+ * zstd_end_stream() must be called until it returns 0, meaning all the data has
+ * been flushed and the frame epilogue has been written.
  *
- * Return: The recommended size for the output buffer.
+ * Return:   The number of bytes still present within internal buffers or an
+ *           error, which can be checked using zstd_is_error().
  */
-size_t ZSTD_CStreamOutSize(void);
-
+size_t zstd_end_stream(zstd_cstream *cstream, struct zstd_out_buffer *output);
 
+/* ======   Streaming Decompression   ====== */
 
-/*-*****************************************************************************
- * Streaming decompression - HowTo
- *
- * A ZSTD_DStream object is required to track streaming operations.
- * Use ZSTD_initDStream() to initialize a ZSTD_DStream object.
- * ZSTD_DStream objects can be re-used multiple times.
- *
- * Use ZSTD_decompressStream() repetitively to consume your input.
- * The function will update both `pos` fields.
- * If `input->pos < input->size`, some input has not been consumed.
- * It's up to the caller to present again remaining data.
- * If `output->pos < output->size`, decoder has flushed everything it could.
- * Returns 0 iff a frame is completely decoded and fully flushed.
- * Otherwise it returns a suggested next input size that will never load more
- * than the current frame.
- ******************************************************************************/
+typedef struct ZSTD_DStream_s zstd_dstream;
 
 /**
- * ZSTD_DStreamWorkspaceBound() - memory needed to initialize a ZSTD_DStream
- * @maxWindowSize: The maximum window size allowed for compressed frames.
+ * zstd_dstream_workspace_bound() - memory needed to initialize a zstd_dstream
+ * @max_window_size: The maximum window size allowed for compressed frames.
  *
- * Return:         A lower bound on the size of the workspace that is passed to
- *                 ZSTD_initDStream() and ZSTD_initDStream_usingDDict().
+ * Return:           A lower bound on the size of the workspace that is passed
+ *                   to zstd_init_dstream().
  */
-size_t ZSTD_DStreamWorkspaceBound(size_t maxWindowSize);
+size_t zstd_dstream_workspace_bound(size_t max_window_size);
 
 /**
- * struct ZSTD_DStream - the zstd streaming decompression context
- */
-typedef struct ZSTD_DStream_s ZSTD_DStream;
-/*===== ZSTD_DStream management functions =====*/
-/**
- * ZSTD_initDStream() - initialize a zstd streaming decompression context
- * @maxWindowSize: The maximum window size allowed for compressed frames.
- * @workspace:     The workspace to emplace the context into. It must outlive
- *                 the returned context.
- * @workspaceSize: The size of workspace.
- *                 Use ZSTD_DStreamWorkspaceBound(maxWindowSize) to determine
- *                 how large the workspace must be.
- *
- * Return:         The zstd streaming decompression context.
- */
-ZSTD_DStream *ZSTD_initDStream(size_t maxWindowSize, void *workspace,
-	size_t workspaceSize);
-/**
- * ZSTD_initDStream_usingDDict() - initialize streaming decompression context
- * @maxWindowSize: The maximum window size allowed for compressed frames.
- * @ddict:         The digested dictionary to use for decompression.
- * @workspace:     The workspace to emplace the context into. It must outlive
- *                 the returned context.
- * @workspaceSize: The size of workspace.
- *                 Use ZSTD_DStreamWorkspaceBound(maxWindowSize) to determine
- *                 how large the workspace must be.
+ * zstd_init_dstream() - initialize a zstd streaming decompression context
+ * @max_window_size: The maximum window size allowed for compressed frames.
+ * @workspace:       The workspace to emplace the context into. It must outlive
+ *                   the returned context.
+ * @workspaceSize:   The size of workspace.
+ *                   Use zstd_dstream_workspace_bound(max_window_size) to
+ *                   determine how large the workspace must be.
  *
- * Return:         The zstd streaming decompression context.
+ * Return:           The zstd streaming decompression context.
  */
-ZSTD_DStream *ZSTD_initDStream_usingDDict(size_t maxWindowSize,
-	const ZSTD_DDict *ddict, void *workspace, size_t workspaceSize);
+zstd_dstream *zstd_init_dstream(size_t max_window_size, void *workspace,
+	size_t workspace_size);
 
-/*===== Streaming decompression functions =====*/
 /**
- * ZSTD_resetDStream() - reset the context using parameters from creation
- * @zds:   The zstd streaming decompression context to reset.
+ * zstd_reset_dstream() - reset the context using parameters from creation
+ * @dstream: The zstd streaming decompression context to reset.
  *
  * Resets the context using the parameters from creation. Skips dictionary
  * loading, since it can be reused.
  *
- * Return: Zero or an error, which can be checked using ZSTD_isError().
+ * Return:   Zero or an error, which can be checked using zstd_is_error().
  */
-size_t ZSTD_resetDStream(ZSTD_DStream *zds);
+size_t zstd_reset_dstream(zstd_dstream *dstream);
+
 /**
- * ZSTD_decompressStream() - streaming decompress some of input into output
- * @zds:    The zstd streaming decompression context.
- * @output: Destination buffer. `output.pos` is updated to indicate how much
- *          decompressed data was written.
- * @input:  Source buffer. `input.pos` is updated to indicate how much data was
- *          read. Note that it may not consume the entire input, in which case
- *          `input.pos < input.size`, and it's up to the caller to present
- *          remaining data again.
+ * zstd_decompress_stream() - streaming decompress some of input into output
+ * @dstream: The zstd streaming decompression context.
+ * @output:  Destination buffer. `output.pos` is updated to indicate how much
+ *           decompressed data was written.
+ * @input:   Source buffer. `input.pos` is updated to indicate how much data was
+ *           read. Note that it may not consume the entire input, in which case
+ *           `input.pos < input.size`, and it's up to the caller to present
+ *           remaining data again.
  *
  * The `input` and `output` buffers may be any size. Guaranteed to make some
  * forward progress if `input` and `output` are not empty.
- * ZSTD_decompressStream() will not consume the last byte of the frame until
+ * zstd_decompress_stream() will not consume the last byte of the frame until
  * the entire frame is flushed.
  *
- * Return:  Returns 0 iff a frame is completely decoded and fully flushed.
- *          Otherwise returns a hint for the number of bytes to use as the input
- *          for the next function call or an error, which can be checked using
- *          ZSTD_isError(). The size hint will never load more than the frame.
- */
-size_t ZSTD_decompressStream(ZSTD_DStream *zds, ZSTD_outBuffer *output,
-	ZSTD_inBuffer *input);
-
-/**
- * ZSTD_DStreamInSize() - recommended size for the input buffer
- *
- * Return: The recommended size for the input buffer.
+ * Return:   Returns 0 iff a frame is completely decoded and fully flushed.
+ *           Otherwise returns a hint for the number of bytes to use as the
+ *           input for the next function call or an error, which can be checked
+ *           using zstd_is_error(). The size hint will never load more than the
+ *           frame.
  */
-size_t ZSTD_DStreamInSize(void);
-/**
- * ZSTD_DStreamOutSize() - recommended size for the output buffer
- *
- * When the output buffer is at least this large, it is guaranteed to be large
- * enough to flush at least one complete decompressed block.
- *
- * Return: The recommended size for the output buffer.
- */
-size_t ZSTD_DStreamOutSize(void);
-
-
-/* --- Constants ---*/
-#define ZSTD_MAGICNUMBER            0xFD2FB528   /* >= v0.8.0 */
-#define ZSTD_MAGIC_SKIPPABLE_START  0x184D2A50U
-
-#define ZSTD_CONTENTSIZE_UNKNOWN (0ULL - 1)
-#define ZSTD_CONTENTSIZE_ERROR   (0ULL - 2)
-
-#define ZSTD_WINDOWLOG_MAX_32  27
-#define ZSTD_WINDOWLOG_MAX_64  27
-#define ZSTD_WINDOWLOG_MAX \
-	((unsigned int)(sizeof(size_t) == 4 \
-		? ZSTD_WINDOWLOG_MAX_32 \
-		: ZSTD_WINDOWLOG_MAX_64))
-#define ZSTD_WINDOWLOG_MIN 10
-#define ZSTD_HASHLOG_MAX ZSTD_WINDOWLOG_MAX
-#define ZSTD_HASHLOG_MIN        6
-#define ZSTD_CHAINLOG_MAX     (ZSTD_WINDOWLOG_MAX+1)
-#define ZSTD_CHAINLOG_MIN      ZSTD_HASHLOG_MIN
-#define ZSTD_HASHLOG3_MAX      17
-#define ZSTD_SEARCHLOG_MAX    (ZSTD_WINDOWLOG_MAX-1)
-#define ZSTD_SEARCHLOG_MIN      1
-/* only for ZSTD_fast, other strategies are limited to 6 */
-#define ZSTD_SEARCHLENGTH_MAX   7
-/* only for ZSTD_btopt, other strategies are limited to 4 */
-#define ZSTD_SEARCHLENGTH_MIN   3
-#define ZSTD_TARGETLENGTH_MIN   4
-#define ZSTD_TARGETLENGTH_MAX 999
-
-/* for static allocation */
-#define ZSTD_FRAMEHEADERSIZE_MAX 18
-#define ZSTD_FRAMEHEADERSIZE_MIN  6
-static const size_t ZSTD_frameHeaderSize_prefix = 5;
-static const size_t ZSTD_frameHeaderSize_min = ZSTD_FRAMEHEADERSIZE_MIN;
-static const size_t ZSTD_frameHeaderSize_max = ZSTD_FRAMEHEADERSIZE_MAX;
-/* magic number + skippable frame length */
-static const size_t ZSTD_skippableHeaderSize = 8;
-
-
-/*-*************************************
- * Compressed size functions
- **************************************/
-
-/**
- * ZSTD_findFrameCompressedSize() - returns the size of a compressed frame
- * @src:     Source buffer. It should point to the start of a zstd encoded frame
- *           or a skippable frame.
- * @srcSize: The size of the source buffer. It must be at least as large as the
- *           size of the frame.
- *
- * Return:   The compressed size of the frame pointed to by `src` or an error,
- *           which can be check with ZSTD_isError().
- *           Suitable to pass to ZSTD_decompress() or similar functions.
- */
-size_t ZSTD_findFrameCompressedSize(const void *src, size_t srcSize);
+size_t zstd_decompress_stream(zstd_dstream *dstream,
+	struct zstd_out_buffer *output, struct zstd_in_buffer *input);
 
-/*-*************************************
- * Decompressed size functions
- **************************************/
-/**
- * ZSTD_getFrameContentSize() - returns the content size in a zstd frame header
- * @src:     It should point to the start of a zstd encoded frame.
- * @srcSize: The size of the source buffer. It must be at least as large as the
- *           frame header. `ZSTD_frameHeaderSize_max` is always large enough.
- *
- * Return:   The frame content size stored in the frame header if known.
- *           `ZSTD_CONTENTSIZE_UNKNOWN` if the content size isn't stored in the
- *           frame header. `ZSTD_CONTENTSIZE_ERROR` on invalid input.
- */
-unsigned long long ZSTD_getFrameContentSize(const void *src, size_t srcSize);
+/* ======   Frame Inspection Functions ====== */
 
 /**
- * ZSTD_findDecompressedSize() - returns decompressed size of a series of frames
- * @src:     It should point to the start of a series of zstd encoded and/or
- *           skippable frames.
- * @srcSize: The exact size of the series of frames.
+ * zstd_find_frame_compressed_size() - returns the size of a compressed frame
+ * @src:      Source buffer. It should point to the start of a zstd encoded
+ *            frame or a skippable frame.
+ * @src_size: The size of the source buffer. It must be at least as large as the
+ *            size of the frame.
  *
- * If any zstd encoded frame in the series doesn't have the frame content size
- * set, `ZSTD_CONTENTSIZE_UNKNOWN` is returned. But frame content size is always
- * set when using ZSTD_compress(). The decompressed size can be very large.
- * If the source is untrusted, the decompressed size could be wrong or
- * intentionally modified. Always ensure the result fits within the
- * application's authorized limits. ZSTD_findDecompressedSize() handles multiple
- * frames, and so it must traverse the input to read each frame header. This is
- * efficient as most of the data is skipped, however it does mean that all frame
- * data must be present and valid.
- *
- * Return:   Decompressed size of all the data contained in the frames if known.
- *           `ZSTD_CONTENTSIZE_UNKNOWN` if the decompressed size is unknown.
- *           `ZSTD_CONTENTSIZE_ERROR` if an error occurred.
+ * Return:    The compressed size of the frame pointed to by `src` or an error,
+ *            which can be check with zstd_is_error().
+ *            Suitable to pass to ZSTD_decompress() or similar functions.
  */
-unsigned long long ZSTD_findDecompressedSize(const void *src, size_t srcSize);
+size_t zstd_find_frame_compressed_size(const void *src, size_t src_size);
 
-/*-*************************************
- * Advanced compression functions
- **************************************/
 /**
- * ZSTD_checkCParams() - ensure parameter values remain within authorized range
- * @cParams: The zstd compression parameters.
- *
- * Return:   Zero or an error, which can be checked using ZSTD_isError().
+ * struct zstd_frame_params - zstd frame parameters stored in the frame header
+ * @frame_content_size: The frame content size, or 0 if not present.
+ * @window_size:        The window size, or 0 if the frame is a skippable frame.
+ * @dict_id:            The dictionary id, or 0 if not present.
+ * @checksum_flag:      Whether a checksum was used.
  */
-size_t ZSTD_checkCParams(ZSTD_compressionParameters cParams);
+struct zstd_frame_params {
+	unsigned long long frame_content_size;
+	unsigned int window_size;
+	unsigned int dict_id;
+	unsigned int checksum_flag;
+};
 
 /**
- * ZSTD_adjustCParams() - optimize parameters for a given srcSize and dictSize
- * @srcSize:  Optionally the estimated source size, or zero if unknown.
- * @dictSize: Optionally the estimated dictionary size, or zero if unknown.
+ * zstd_get_frame_params() - extracts parameters from a zstd or skippable frame
+ * @params:   On success the frame parameters are written here.
+ * @src:      The source buffer. It must point to a zstd or skippable frame.
+ * @src_size: The size of the source buffer.
  *
- * Return:    The optimized parameters.
+ * Return:    0 on success. If more data is required it returns how many bytes
+ *            must be provided to make forward progress. Otherwise it returns
+ *            an error, which can be checked using zstd_is_error().
  */
-ZSTD_compressionParameters ZSTD_adjustCParams(
-	ZSTD_compressionParameters cParams, unsigned long long srcSize,
-	size_t dictSize);
-
-/*--- Advanced decompression functions ---*/
-
-/**
- * ZSTD_isFrame() - returns true iff the buffer starts with a valid frame
- * @buffer: The source buffer to check.
- * @size:   The size of the source buffer, must be at least 4 bytes.
- *
- * Return: True iff the buffer starts with a zstd or skippable frame identifier.
- */
-unsigned int ZSTD_isFrame(const void *buffer, size_t size);
-
-/**
- * ZSTD_getDictID_fromDict() - returns the dictionary id stored in a dictionary
- * @dict:     The dictionary buffer.
- * @dictSize: The size of the dictionary buffer.
- *
- * Return:    The dictionary id stored within the dictionary or 0 if the
- *            dictionary is not a zstd dictionary. If it returns 0 the
- *            dictionary can still be loaded as a content-only dictionary.
- */
-unsigned int ZSTD_getDictID_fromDict(const void *dict, size_t dictSize);
-
-/**
- * ZSTD_getDictID_fromDDict() - returns the dictionary id stored in a ZSTD_DDict
- * @ddict: The ddict to find the id of.
- *
- * Return: The dictionary id stored within `ddict` or 0 if the dictionary is not
- *         a zstd dictionary. If it returns 0 `ddict` will be loaded as a
- *         content-only dictionary.
- */
-unsigned int ZSTD_getDictID_fromDDict(const ZSTD_DDict *ddict);
-
-/**
- * ZSTD_getDictID_fromFrame() - returns the dictionary id stored in a zstd frame
- * @src:     Source buffer. It must be a zstd encoded frame.
- * @srcSize: The size of the source buffer. It must be at least as large as the
- *           frame header. `ZSTD_frameHeaderSize_max` is always large enough.
- *
- * Return:   The dictionary id required to decompress the frame stored within
- *           `src` or 0 if the dictionary id could not be decoded. It can return
- *           0 if the frame does not require a dictionary, the dictionary id
- *           wasn't stored in the frame, `src` is not a zstd frame, or `srcSize`
- *           is too small.
- */
-unsigned int ZSTD_getDictID_fromFrame(const void *src, size_t srcSize);
-
-/**
- * struct ZSTD_frameParams - zstd frame parameters stored in the frame header
- * @frameContentSize: The frame content size, or 0 if not present.
- * @windowSize:       The window size, or 0 if the frame is a skippable frame.
- * @dictID:           The dictionary id, or 0 if not present.
- * @checksumFlag:     Whether a checksum was used.
- */
-typedef struct {
-	unsigned long long frameContentSize;
-	unsigned int windowSize;
-	unsigned int dictID;
-	unsigned int checksumFlag;
-} ZSTD_frameParams;
-
-/**
- * ZSTD_getFrameParams() - extracts parameters from a zstd or skippable frame
- * @fparamsPtr: On success the frame parameters are written here.
- * @src:        The source buffer. It must point to a zstd or skippable frame.
- * @srcSize:    The size of the source buffer. `ZSTD_frameHeaderSize_max` is
- *              always large enough to succeed.
- *
- * Return:      0 on success. If more data is required it returns how many bytes
- *              must be provided to make forward progress. Otherwise it returns
- *              an error, which can be checked using ZSTD_isError().
- */
-size_t ZSTD_getFrameParams(ZSTD_frameParams *fparamsPtr, const void *src,
-	size_t srcSize);
-
-/*-*****************************************************************************
- * Buffer-less and synchronous inner streaming functions
- *
- * This is an advanced API, giving full control over buffer management, for
- * users which need direct control over memory.
- * But it's also a complex one, with many restrictions (documented below).
- * Prefer using normal streaming API for an easier experience
- ******************************************************************************/
-
-/*-*****************************************************************************
- * Buffer-less streaming compression (synchronous mode)
- *
- * A ZSTD_CCtx object is required to track streaming operations.
- * Use ZSTD_initCCtx() to initialize a context.
- * ZSTD_CCtx object can be re-used multiple times within successive compression
- * operations.
- *
- * Start by initializing a context.
- * Use ZSTD_compressBegin(), or ZSTD_compressBegin_usingDict() for dictionary
- * compression,
- * or ZSTD_compressBegin_advanced(), for finer parameter control.
- * It's also possible to duplicate a reference context which has already been
- * initialized, using ZSTD_copyCCtx()
- *
- * Then, consume your input using ZSTD_compressContinue().
- * There are some important considerations to keep in mind when using this
- * advanced function :
- * - ZSTD_compressContinue() has no internal buffer. It uses externally provided
- *   buffer only.
- * - Interface is synchronous : input is consumed entirely and produce 1+
- *   (or more) compressed blocks.
- * - Caller must ensure there is enough space in `dst` to store compressed data
- *   under worst case scenario. Worst case evaluation is provided by
- *   ZSTD_compressBound().
- *   ZSTD_compressContinue() doesn't guarantee recover after a failed
- *   compression.
- * - ZSTD_compressContinue() presumes prior input ***is still accessible and
- *   unmodified*** (up to maximum distance size, see WindowLog).
- *   It remembers all previous contiguous blocks, plus one separated memory
- *   segment (which can itself consists of multiple contiguous blocks)
- * - ZSTD_compressContinue() detects that prior input has been overwritten when
- *   `src` buffer overlaps. In which case, it will "discard" the relevant memory
- *   section from its history.
- *
- * Finish a frame with ZSTD_compressEnd(), which will write the last block(s)
- * and optional checksum. It's possible to use srcSize==0, in which case, it
- * will write a final empty block to end the frame. Without last block mark,
- * frames will be considered unfinished (corrupted) by decoders.
- *
- * `ZSTD_CCtx` object can be re-used (ZSTD_compressBegin()) to compress some new
- * frame.
- ******************************************************************************/
-
-/*=====   Buffer-less streaming compression functions  =====*/
-size_t ZSTD_compressBegin(ZSTD_CCtx *cctx, int compressionLevel);
-size_t ZSTD_compressBegin_usingDict(ZSTD_CCtx *cctx, const void *dict,
-	size_t dictSize, int compressionLevel);
-size_t ZSTD_compressBegin_advanced(ZSTD_CCtx *cctx, const void *dict,
-	size_t dictSize, ZSTD_parameters params,
-	unsigned long long pledgedSrcSize);
-size_t ZSTD_copyCCtx(ZSTD_CCtx *cctx, const ZSTD_CCtx *preparedCCtx,
-	unsigned long long pledgedSrcSize);
-size_t ZSTD_compressBegin_usingCDict(ZSTD_CCtx *cctx, const ZSTD_CDict *cdict,
-	unsigned long long pledgedSrcSize);
-size_t ZSTD_compressContinue(ZSTD_CCtx *cctx, void *dst, size_t dstCapacity,
-	const void *src, size_t srcSize);
-size_t ZSTD_compressEnd(ZSTD_CCtx *cctx, void *dst, size_t dstCapacity,
-	const void *src, size_t srcSize);
-
-
-
-/*-*****************************************************************************
- * Buffer-less streaming decompression (synchronous mode)
- *
- * A ZSTD_DCtx object is required to track streaming operations.
- * Use ZSTD_initDCtx() to initialize a context.
- * A ZSTD_DCtx object can be re-used multiple times.
- *
- * First typical operation is to retrieve frame parameters, using
- * ZSTD_getFrameParams(). It fills a ZSTD_frameParams structure which provide
- * important information to correctly decode the frame, such as the minimum
- * rolling buffer size to allocate to decompress data (`windowSize`), and the
- * dictionary ID used.
- * Note: content size is optional, it may not be present. 0 means unknown.
- * Note that these values could be wrong, either because of data malformation,
- * or because an attacker is spoofing deliberate false information. As a
- * consequence, check that values remain within valid application range,
- * especially `windowSize`, before allocation. Each application can set its own
- * limit, depending on local restrictions. For extended interoperability, it is
- * recommended to support at least 8 MB.
- * Frame parameters are extracted from the beginning of the compressed frame.
- * Data fragment must be large enough to ensure successful decoding, typically
- * `ZSTD_frameHeaderSize_max` bytes.
- * Result: 0: successful decoding, the `ZSTD_frameParams` structure is filled.
- *        >0: `srcSize` is too small, provide at least this many bytes.
- *        errorCode, which can be tested using ZSTD_isError().
- *
- * Start decompression, with ZSTD_decompressBegin() or
- * ZSTD_decompressBegin_usingDict(). Alternatively, you can copy a prepared
- * context, using ZSTD_copyDCtx().
- *
- * Then use ZSTD_nextSrcSizeToDecompress() and ZSTD_decompressContinue()
- * alternatively.
- * ZSTD_nextSrcSizeToDecompress() tells how many bytes to provide as 'srcSize'
- * to ZSTD_decompressContinue().
- * ZSTD_decompressContinue() requires this _exact_ amount of bytes, or it will
- * fail.
- *
- * The result of ZSTD_decompressContinue() is the number of bytes regenerated
- * within 'dst' (necessarily <= dstCapacity). It can be zero, which is not an
- * error; it just means ZSTD_decompressContinue() has decoded some metadata
- * item. It can also be an error code, which can be tested with ZSTD_isError().
- *
- * ZSTD_decompressContinue() needs previous data blocks during decompression, up
- * to `windowSize`. They should preferably be located contiguously, prior to
- * current block. Alternatively, a round buffer of sufficient size is also
- * possible. Sufficient size is determined by frame parameters.
- * ZSTD_decompressContinue() is very sensitive to contiguity, if 2 blocks don't
- * follow each other, make sure that either the compressor breaks contiguity at
- * the same place, or that previous contiguous segment is large enough to
- * properly handle maximum back-reference.
- *
- * A frame is fully decoded when ZSTD_nextSrcSizeToDecompress() returns zero.
- * Context can then be reset to start a new decompression.
- *
- * Note: it's possible to know if next input to present is a header or a block,
- * using ZSTD_nextInputType(). This information is not required to properly
- * decode a frame.
- *
- * == Special case: skippable frames ==
- *
- * Skippable frames allow integration of user-defined data into a flow of
- * concatenated frames. Skippable frames will be ignored (skipped) by a
- * decompressor. The format of skippable frames is as follows:
- * a) Skippable frame ID - 4 Bytes, Little endian format, any value from
- *    0x184D2A50 to 0x184D2A5F
- * b) Frame Size - 4 Bytes, Little endian format, unsigned 32-bits
- * c) Frame Content - any content (User Data) of length equal to Frame Size
- * For skippable frames ZSTD_decompressContinue() always returns 0.
- * For skippable frames ZSTD_getFrameParams() returns fparamsPtr->windowLog==0
- * what means that a frame is skippable.
- * Note: If fparamsPtr->frameContentSize==0, it is ambiguous: the frame might
- *       actually be a zstd encoded frame with no content. For purposes of
- *       decompression, it is valid in both cases to skip the frame using
- *       ZSTD_findFrameCompressedSize() to find its size in bytes.
- * It also returns frame size as fparamsPtr->frameContentSize.
- ******************************************************************************/
-
-/*=====   Buffer-less streaming decompression functions  =====*/
-size_t ZSTD_decompressBegin(ZSTD_DCtx *dctx);
-size_t ZSTD_decompressBegin_usingDict(ZSTD_DCtx *dctx, const void *dict,
-	size_t dictSize);
-void   ZSTD_copyDCtx(ZSTD_DCtx *dctx, const ZSTD_DCtx *preparedDCtx);
-size_t ZSTD_nextSrcSizeToDecompress(ZSTD_DCtx *dctx);
-size_t ZSTD_decompressContinue(ZSTD_DCtx *dctx, void *dst, size_t dstCapacity,
-	const void *src, size_t srcSize);
-typedef enum {
-	ZSTDnit_frameHeader,
-	ZSTDnit_blockHeader,
-	ZSTDnit_block,
-	ZSTDnit_lastBlock,
-	ZSTDnit_checksum,
-	ZSTDnit_skippableFrame
-} ZSTD_nextInputType_e;
-ZSTD_nextInputType_e ZSTD_nextInputType(ZSTD_DCtx *dctx);
-
-/*-*****************************************************************************
- * Block functions
- *
- * Block functions produce and decode raw zstd blocks, without frame metadata.
- * Frame metadata cost is typically ~18 bytes, which can be non-negligible for
- * very small blocks (< 100 bytes). User will have to take in charge required
- * information to regenerate data, such as compressed and content sizes.
- *
- * A few rules to respect:
- * - Compressing and decompressing require a context structure
- *   + Use ZSTD_initCCtx() and ZSTD_initDCtx()
- * - It is necessary to init context before starting
- *   + compression : ZSTD_compressBegin()
- *   + decompression : ZSTD_decompressBegin()
- *   + variants _usingDict() are also allowed
- *   + copyCCtx() and copyDCtx() work too
- * - Block size is limited, it must be <= ZSTD_getBlockSizeMax()
- *   + If you need to compress more, cut data into multiple blocks
- *   + Consider using the regular ZSTD_compress() instead, as frame metadata
- *     costs become negligible when source size is large.
- * - When a block is considered not compressible enough, ZSTD_compressBlock()
- *   result will be zero. In which case, nothing is produced into `dst`.
- *   + User must test for such outcome and deal directly with uncompressed data
- *   + ZSTD_decompressBlock() doesn't accept uncompressed data as input!!!
- *   + In case of multiple successive blocks, decoder must be informed of
- *     uncompressed block existence to follow proper history. Use
- *     ZSTD_insertBlock() in such a case.
- ******************************************************************************/
-
-/* Define for static allocation */
-#define ZSTD_BLOCKSIZE_ABSOLUTEMAX (128 * 1024)
-/*=====   Raw zstd block functions  =====*/
-size_t ZSTD_getBlockSizeMax(ZSTD_CCtx *cctx);
-size_t ZSTD_compressBlock(ZSTD_CCtx *cctx, void *dst, size_t dstCapacity,
-	const void *src, size_t srcSize);
-size_t ZSTD_decompressBlock(ZSTD_DCtx *dctx, void *dst, size_t dstCapacity,
-	const void *src, size_t srcSize);
-size_t ZSTD_insertBlock(ZSTD_DCtx *dctx, const void *blockStart,
-	size_t blockSize);
+size_t zstd_get_frame_params(struct zstd_frame_params *params, const void *src,
+	size_t src_size);
 
-#endif  /* ZSTD_H */
+#endif  /* LINUX_ZSTD_H */
diff --git a/lib/decompress_unzstd.c b/lib/decompress_unzstd.c
index 790abc472f5b..87ff567fd76d 100644
--- a/lib/decompress_unzstd.c
+++ b/lib/decompress_unzstd.c
@@ -80,7 +80,8 @@
 #include <linux/zstd.h>
 
 /* 128MB is the maximum window size supported by zstd. */
-#define ZSTD_WINDOWSIZE_MAX	(1 << ZSTD_WINDOWLOG_MAX)
+#define UNZSTD_WINDOWLOG_MAX 27
+#define UNZSTD_WINDOWSIZE_MAX	(1 << UNZSTD_WINDOWLOG_MAX)
 /*
  * Size of the input and output buffers in multi-call mode.
  * Pick a larger size because it isn't used during kernel decompression,
@@ -91,27 +92,10 @@
 
 static int INIT handle_zstd_error(size_t ret, void (*error)(char *x))
 {
-	const int err = ZSTD_getErrorCode(ret);
-
-	if (!ZSTD_isError(ret))
+	if (!zstd_is_error(ret))
 		return 0;
 
-	switch (err) {
-	case ZSTD_error_memory_allocation:
-		error("ZSTD decompressor ran out of memory");
-		break;
-	case ZSTD_error_prefix_unknown:
-		error("Input is not in the ZSTD format (wrong magic bytes)");
-		break;
-	case ZSTD_error_dstSize_tooSmall:
-	case ZSTD_error_corruption_detected:
-	case ZSTD_error_checksum_wrong:
-		error("ZSTD-compressed data is corrupt");
-		break;
-	default:
-		error("ZSTD-compressed data is probably corrupt");
-		break;
-	}
+	error("ZSTD decompression failed");
 	return -1;
 }
 
@@ -124,28 +108,28 @@ static int INIT decompress_single(const u8 *in_buf, long in_len, u8 *out_buf,
 				  long out_len, long *in_pos,
 				  void (*error)(char *x))
 {
-	const size_t wksp_size = ZSTD_DCtxWorkspaceBound();
+	const size_t wksp_size = zstd_dctx_workspace_bound();
 	void *wksp = large_malloc(wksp_size);
-	ZSTD_DCtx *dctx = ZSTD_initDCtx(wksp, wksp_size);
+	zstd_dctx *dctx = zstd_init_dctx(wksp, wksp_size);
 	int err;
 	size_t ret;
 
 	if (dctx == NULL) {
-		error("Out of memory while allocating ZSTD_DCtx");
+		error("Out of memory while allocating zstd_dctx");
 		err = -1;
 		goto out;
 	}
 	/*
 	 * Find out how large the frame actually is, there may be junk at
-	 * the end of the frame that ZSTD_decompressDCtx() can't handle.
+	 * the end of the frame that zstd_decompress_dctx() can't handle.
 	 */
-	ret = ZSTD_findFrameCompressedSize(in_buf, in_len);
+	ret = zstd_find_frame_compressed_size(in_buf, in_len);
 	err = handle_zstd_error(ret, error);
 	if (err)
 		goto out;
 	in_len = (long)ret;
 
-	ret = ZSTD_decompressDCtx(dctx, out_buf, out_len, in_buf, in_len);
+	ret = zstd_decompress_dctx(dctx, out_buf, out_len, in_buf, in_len);
 	err = handle_zstd_error(ret, error);
 	if (err)
 		goto out;
@@ -167,14 +151,14 @@ static int INIT __unzstd(unsigned char *in_buf, long in_len,
 			 long *in_pos,
 			 void (*error)(char *x))
 {
-	ZSTD_inBuffer in;
-	ZSTD_outBuffer out;
-	ZSTD_frameParams params;
+	struct zstd_in_buffer in;
+	struct zstd_out_buffer out;
+	struct zstd_frame_params params;
 	void *in_allocated = NULL;
 	void *out_allocated = NULL;
 	void *wksp = NULL;
 	size_t wksp_size;
-	ZSTD_DStream *dstream;
+	zstd_dstream *dstream;
 	int err;
 	size_t ret;
 
@@ -238,13 +222,13 @@ static int INIT __unzstd(unsigned char *in_buf, long in_len,
 	out.size = out_len;
 
 	/*
-	 * We need to know the window size to allocate the ZSTD_DStream.
+	 * We need to know the window size to allocate the zstd_dstream.
 	 * Since we are streaming, we need to allocate a buffer for the sliding
-	 * window. The window size varies from 1 KB to ZSTD_WINDOWSIZE_MAX
+	 * window. The window size varies from 1 KB to UNZSTD_WINDOWSIZE_MAX
 	 * (8 MB), so it is important to use the actual value so as not to
 	 * waste memory when it is smaller.
 	 */
-	ret = ZSTD_getFrameParams(&params, in.src, in.size);
+	ret = zstd_get_frame_params(&params, in.src, in.size);
 	err = handle_zstd_error(ret, error);
 	if (err)
 		goto out;
@@ -253,19 +237,19 @@ static int INIT __unzstd(unsigned char *in_buf, long in_len,
 		err = -1;
 		goto out;
 	}
-	if (params.windowSize > ZSTD_WINDOWSIZE_MAX) {
+	if (params.window_size > UNZSTD_WINDOWSIZE_MAX) {
 		error("ZSTD-compressed data has too large a window size");
 		err = -1;
 		goto out;
 	}
 
 	/*
-	 * Allocate the ZSTD_DStream now that we know how much memory is
+	 * Allocate the zstd_dstream now that we know how much memory is
 	 * required.
 	 */
-	wksp_size = ZSTD_DStreamWorkspaceBound(params.windowSize);
+	wksp_size = zstd_dstream_workspace_bound(params.window_size);
 	wksp = large_malloc(wksp_size);
-	dstream = ZSTD_initDStream(params.windowSize, wksp, wksp_size);
+	dstream = zstd_init_dstream(params.window_size, wksp, wksp_size);
 	if (dstream == NULL) {
 		error("Out of memory while allocating ZSTD_DStream");
 		err = -1;
@@ -298,7 +282,7 @@ static int INIT __unzstd(unsigned char *in_buf, long in_len,
 			in.size = in_len;
 		}
 		/* Returns zero when the frame is complete. */
-		ret = ZSTD_decompressStream(dstream, &out, &in);
+		ret = zstd_decompress_stream(dstream, &out, &in);
 		err = handle_zstd_error(ret, error);
 		if (err)
 			goto out;
diff --git a/lib/zstd/compress.c b/lib/zstd/compress.c
index 5e0b67003e55..293fa8e99e92 100644
--- a/lib/zstd/compress.c
+++ b/lib/zstd/compress.c
@@ -3443,43 +3443,179 @@ ZSTD_parameters ZSTD_getParams(int compressionLevel, unsigned long long srcSize,
 	return params;
 }
 
-EXPORT_SYMBOL(ZSTD_maxCLevel);
-EXPORT_SYMBOL(ZSTD_compressBound);
-
-EXPORT_SYMBOL(ZSTD_CCtxWorkspaceBound);
-EXPORT_SYMBOL(ZSTD_initCCtx);
-EXPORT_SYMBOL(ZSTD_compressCCtx);
-EXPORT_SYMBOL(ZSTD_compress_usingDict);
-
-EXPORT_SYMBOL(ZSTD_CDictWorkspaceBound);
-EXPORT_SYMBOL(ZSTD_initCDict);
-EXPORT_SYMBOL(ZSTD_compress_usingCDict);
-
-EXPORT_SYMBOL(ZSTD_CStreamWorkspaceBound);
-EXPORT_SYMBOL(ZSTD_initCStream);
-EXPORT_SYMBOL(ZSTD_initCStream_usingCDict);
-EXPORT_SYMBOL(ZSTD_resetCStream);
-EXPORT_SYMBOL(ZSTD_compressStream);
-EXPORT_SYMBOL(ZSTD_flushStream);
-EXPORT_SYMBOL(ZSTD_endStream);
-EXPORT_SYMBOL(ZSTD_CStreamInSize);
-EXPORT_SYMBOL(ZSTD_CStreamOutSize);
-
-EXPORT_SYMBOL(ZSTD_getCParams);
-EXPORT_SYMBOL(ZSTD_getParams);
-EXPORT_SYMBOL(ZSTD_checkCParams);
-EXPORT_SYMBOL(ZSTD_adjustCParams);
-
-EXPORT_SYMBOL(ZSTD_compressBegin);
-EXPORT_SYMBOL(ZSTD_compressBegin_usingDict);
-EXPORT_SYMBOL(ZSTD_compressBegin_advanced);
-EXPORT_SYMBOL(ZSTD_copyCCtx);
-EXPORT_SYMBOL(ZSTD_compressBegin_usingCDict);
-EXPORT_SYMBOL(ZSTD_compressContinue);
-EXPORT_SYMBOL(ZSTD_compressEnd);
-
-EXPORT_SYMBOL(ZSTD_getBlockSizeMax);
-EXPORT_SYMBOL(ZSTD_compressBlock);
+static void zstd_check_structs(void)
+{
+	/* Check that the structs have the same size. */
+	ZSTD_STATIC_ASSERT(sizeof(ZSTD_parameters) ==
+		sizeof(struct zstd_parameters));
+	ZSTD_STATIC_ASSERT(sizeof(ZSTD_compressionParameters) ==
+		sizeof(struct zstd_compression_parameters));
+	ZSTD_STATIC_ASSERT(sizeof(ZSTD_frameParameters) ==
+		sizeof(struct zstd_frame_parameters));
+	/* Zstd guarantees that the layout of the structs never change. Verify it. */
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_parameters, cParams) ==
+		offsetof(struct zstd_parameters, cparams));
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_parameters, fParams) ==
+		offsetof(struct zstd_parameters, fparams));
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_compressionParameters, windowLog) ==
+		offsetof(struct zstd_compression_parameters, window_log));
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_compressionParameters, chainLog) ==
+		offsetof(struct zstd_compression_parameters, chain_log));
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_compressionParameters, hashLog) ==
+		offsetof(struct zstd_compression_parameters, hash_log));
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_compressionParameters, searchLog) ==
+		offsetof(struct zstd_compression_parameters, search_log));
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_compressionParameters, searchLength) ==
+		offsetof(struct zstd_compression_parameters, search_length));
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_compressionParameters, targetLength) ==
+		offsetof(struct zstd_compression_parameters, target_length));
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_compressionParameters, strategy) ==
+		offsetof(struct zstd_compression_parameters, strategy));
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_frameParameters, contentSizeFlag) ==
+		offsetof(struct zstd_frame_parameters, content_size_flag));
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_frameParameters, checksumFlag) ==
+		offsetof(struct zstd_frame_parameters, checksum_flag));
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_frameParameters, noDictIDFlag) ==
+		offsetof(struct zstd_frame_parameters, no_dict_id_flag));
+	/* Check that the strategies are the same. This can change. */
+	ZSTD_STATIC_ASSERT((int)ZSTD_fast == (int)zstd_fast);
+	ZSTD_STATIC_ASSERT((int)ZSTD_dfast == (int)zstd_dfast);
+	ZSTD_STATIC_ASSERT((int)ZSTD_greedy == (int)zstd_greedy);
+	ZSTD_STATIC_ASSERT((int)ZSTD_lazy == (int)zstd_lazy);
+	ZSTD_STATIC_ASSERT((int)ZSTD_lazy2 == (int)zstd_lazy2);
+	ZSTD_STATIC_ASSERT((int)ZSTD_btlazy2 == (int)zstd_btlazy2);
+	ZSTD_STATIC_ASSERT((int)ZSTD_btopt == (int)zstd_btopt);
+	ZSTD_STATIC_ASSERT((int)ZSTD_btopt2 == (int)zstd_btopt2);
+	/* Check input buffer */
+	ZSTD_STATIC_ASSERT(sizeof(ZSTD_inBuffer) == sizeof(struct zstd_in_buffer));
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_inBuffer, src) ==
+		offsetof(struct zstd_in_buffer, src));
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_inBuffer, size) ==
+		offsetof(struct zstd_in_buffer, size));
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_inBuffer, pos) ==
+		offsetof(struct zstd_in_buffer, pos));
+	/* Check output buffer */
+	ZSTD_STATIC_ASSERT(sizeof(ZSTD_outBuffer) ==
+		sizeof(struct zstd_out_buffer));
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_outBuffer, dst) ==
+		offsetof(struct zstd_out_buffer, dst));
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_outBuffer, size) ==
+		offsetof(struct zstd_out_buffer, size));
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_outBuffer, pos) ==
+		offsetof(struct zstd_out_buffer, pos));
+}
+
+size_t zstd_compress_bound(size_t src_size)
+{
+	return ZSTD_compressBound(src_size);
+}
+EXPORT_SYMBOL(zstd_compress_bound);
+
+struct zstd_parameters zstd_get_params(int level,
+	unsigned long long estimated_src_size)
+{
+	const ZSTD_parameters params = ZSTD_getParams(level, estimated_src_size, 0);
+	struct zstd_parameters out;
+
+	/* no-op */
+	zstd_check_structs();
+	memcpy(&out, &params, sizeof(out));
+	return out;
+}
+EXPORT_SYMBOL(zstd_get_params);
+
+size_t zstd_cctx_workspace_bound(
+	const struct zstd_compression_parameters *cparams)
+{
+	ZSTD_compressionParameters p;
+
+	memcpy(&p, cparams, sizeof(p));
+	return ZSTD_CCtxWorkspaceBound(p);
+}
+EXPORT_SYMBOL(zstd_cctx_workspace_bound);
+
+zstd_cctx *zstd_init_cctx(void *workspace, size_t workspace_size)
+{
+	return ZSTD_initCCtx(workspace, workspace_size);
+}
+EXPORT_SYMBOL(zstd_init_cctx);
+
+size_t zstd_compress_cctx(zstd_cctx *cctx, void *dst, size_t dst_capacity,
+	const void *src, size_t src_size, const struct zstd_parameters *parameters)
+{
+	ZSTD_parameters p;
+
+	memcpy(&p, parameters, sizeof(p));
+	return ZSTD_compressCCtx(cctx, dst, dst_capacity, src, src_size, p);
+}
+EXPORT_SYMBOL(zstd_compress_cctx);
+
+size_t zstd_cstream_workspace_bound(
+	const struct zstd_compression_parameters *cparams)
+{
+	ZSTD_compressionParameters p;
+
+	memcpy(&p, cparams, sizeof(p));
+	return ZSTD_CStreamWorkspaceBound(p);
+}
+EXPORT_SYMBOL(zstd_cstream_workspace_bound);
+
+zstd_cstream *zstd_init_cstream(const struct zstd_parameters *parameters,
+	unsigned long long pledged_src_size, void *workspace, size_t workspace_size)
+{
+	ZSTD_parameters p;
+
+	memcpy(&p, parameters, sizeof(p));
+	return ZSTD_initCStream(p, pledged_src_size, workspace, workspace_size);
+}
+EXPORT_SYMBOL(zstd_init_cstream);
+
+size_t zstd_reset_cstream(zstd_cstream *cstream,
+	unsigned long long pledged_src_size)
+{
+	return ZSTD_resetCStream(cstream, pledged_src_size);
+}
+EXPORT_SYMBOL(zstd_reset_cstream);
+
+size_t zstd_compress_stream(zstd_cstream *cstream,
+	struct zstd_out_buffer *output, struct zstd_in_buffer *input)
+{
+	ZSTD_outBuffer o;
+	ZSTD_inBuffer i;
+	size_t ret;
+
+	memcpy(&o, output, sizeof(o));
+	memcpy(&i, input, sizeof(i));
+	ret = ZSTD_compressStream(cstream, &o, &i);
+	memcpy(output, &o, sizeof(o));
+	memcpy(input, &i, sizeof(i));
+	return ret;
+}
+EXPORT_SYMBOL(zstd_compress_stream);
+
+size_t zstd_flush_stream(zstd_cstream *cstream, struct zstd_out_buffer *output)
+{
+	ZSTD_outBuffer o;
+	size_t ret;
+
+	memcpy(&o, output, sizeof(o));
+	ret = ZSTD_flushStream(cstream, &o);
+	memcpy(output, &o, sizeof(o));
+	return ret;
+}
+EXPORT_SYMBOL(zstd_flush_stream);
+
+size_t zstd_end_stream(zstd_cstream *cstream, struct zstd_out_buffer *output)
+{
+	ZSTD_outBuffer o;
+	size_t ret;
+
+	memcpy(&o, output, sizeof(o));
+	ret = ZSTD_endStream(cstream, &o);
+	memcpy(output, &o, sizeof(o));
+	return ret;
+}
+EXPORT_SYMBOL(zstd_end_stream);
 
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_DESCRIPTION("Zstd Compressor");
diff --git a/lib/zstd/decompress.c b/lib/zstd/decompress.c
index db6761ea4deb..abbf86ac1ca5 100644
--- a/lib/zstd/decompress.c
+++ b/lib/zstd/decompress.c
@@ -2490,42 +2490,110 @@ size_t ZSTD_decompressStream(ZSTD_DStream *zds, ZSTD_outBuffer *output, ZSTD_inB
 	}
 }
 
-EXPORT_SYMBOL(ZSTD_DCtxWorkspaceBound);
-EXPORT_SYMBOL(ZSTD_initDCtx);
-EXPORT_SYMBOL(ZSTD_decompressDCtx);
-EXPORT_SYMBOL(ZSTD_decompress_usingDict);
-
-EXPORT_SYMBOL(ZSTD_DDictWorkspaceBound);
-EXPORT_SYMBOL(ZSTD_initDDict);
-EXPORT_SYMBOL(ZSTD_decompress_usingDDict);
-
-EXPORT_SYMBOL(ZSTD_DStreamWorkspaceBound);
-EXPORT_SYMBOL(ZSTD_initDStream);
-EXPORT_SYMBOL(ZSTD_initDStream_usingDDict);
-EXPORT_SYMBOL(ZSTD_resetDStream);
-EXPORT_SYMBOL(ZSTD_decompressStream);
-EXPORT_SYMBOL(ZSTD_DStreamInSize);
-EXPORT_SYMBOL(ZSTD_DStreamOutSize);
-
-EXPORT_SYMBOL(ZSTD_findFrameCompressedSize);
-EXPORT_SYMBOL(ZSTD_getFrameContentSize);
-EXPORT_SYMBOL(ZSTD_findDecompressedSize);
-
-EXPORT_SYMBOL(ZSTD_isFrame);
-EXPORT_SYMBOL(ZSTD_getDictID_fromDict);
-EXPORT_SYMBOL(ZSTD_getDictID_fromDDict);
-EXPORT_SYMBOL(ZSTD_getDictID_fromFrame);
-
-EXPORT_SYMBOL(ZSTD_getFrameParams);
-EXPORT_SYMBOL(ZSTD_decompressBegin);
-EXPORT_SYMBOL(ZSTD_decompressBegin_usingDict);
-EXPORT_SYMBOL(ZSTD_copyDCtx);
-EXPORT_SYMBOL(ZSTD_nextSrcSizeToDecompress);
-EXPORT_SYMBOL(ZSTD_decompressContinue);
-EXPORT_SYMBOL(ZSTD_nextInputType);
-
-EXPORT_SYMBOL(ZSTD_decompressBlock);
-EXPORT_SYMBOL(ZSTD_insertBlock);
+unsigned int zstd_is_error(size_t code)
+{
+	return ZSTD_isError(code);
+}
+EXPORT_SYMBOL(zstd_is_error);
+
+int zstd_get_error_code(size_t code)
+{
+	return ZSTD_getErrorCode(code);
+}
+EXPORT_SYMBOL(zstd_get_error_code);
+
+const char *zstd_get_error_name(size_t code)
+{
+	return "GENERIC";
+}
+EXPORT_SYMBOL(zstd_get_error_name);
+
+size_t zstd_dctx_workspace_bound(void)
+{
+	return ZSTD_DCtxWorkspaceBound();
+}
+EXPORT_SYMBOL(zstd_dctx_workspace_bound);
+
+zstd_dctx *zstd_init_dctx(void *workspace, size_t workspace_size)
+{
+	return ZSTD_initDCtx(workspace, workspace_size);
+}
+EXPORT_SYMBOL(zstd_init_dctx);
+
+size_t zstd_decompress_dctx(zstd_dctx *dctx, void *dst, size_t dst_capacity,
+	const void *src, size_t src_size)
+{
+	return ZSTD_decompressDCtx(dctx, dst, dst_capacity, src, src_size);
+}
+EXPORT_SYMBOL(zstd_decompress_dctx);
+
+size_t zstd_dstream_workspace_bound(size_t max_window_size)
+{
+	return ZSTD_DStreamWorkspaceBound(max_window_size);
+}
+EXPORT_SYMBOL(zstd_dstream_workspace_bound);
+
+zstd_dstream *zstd_init_dstream(size_t max_window_size, void *workspace,
+	size_t workspace_size)
+{
+	return ZSTD_initDStream(max_window_size, workspace, workspace_size);
+}
+EXPORT_SYMBOL(zstd_init_dstream);
+
+size_t zstd_reset_dstream(zstd_dstream *dstream)
+{
+	return ZSTD_resetDStream(dstream);
+}
+EXPORT_SYMBOL(zstd_reset_dstream);
+
+size_t zstd_decompress_stream(zstd_dstream *dstream,
+	struct zstd_out_buffer *output, struct zstd_in_buffer *input)
+{
+	ZSTD_outBuffer o;
+	ZSTD_inBuffer i;
+	size_t ret;
+
+	memcpy(&o, output, sizeof(o));
+	memcpy(&i, input, sizeof(i));
+	ret = ZSTD_decompressStream(dstream, &o, &i);
+	memcpy(output, &o, sizeof(o));
+	memcpy(input, &i, sizeof(i));
+	return ret;
+}
+EXPORT_SYMBOL(zstd_decompress_stream);
+
+size_t zstd_find_frame_compressed_size(const void *src, size_t src_size)
+{
+	return ZSTD_findFrameCompressedSize(src, src_size);
+}
+EXPORT_SYMBOL(zstd_find_frame_compressed_size);
+
+static void zstd_check_frame_params(void)
+{
+	ZSTD_STATIC_ASSERT(sizeof(ZSTD_frameParams) ==
+		sizeof(struct zstd_frame_params));
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_frameParams, frameContentSize) ==
+		offsetof(struct zstd_frame_params, frame_content_size));
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_frameParams, windowSize) ==
+		offsetof(struct zstd_frame_params, window_size));
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_frameParams, dictID) ==
+		offsetof(struct zstd_frame_params, dict_id));
+	ZSTD_STATIC_ASSERT(offsetof(ZSTD_frameParams, checksumFlag) ==
+		offsetof(struct zstd_frame_params, checksum_flag));
+}
+
+size_t zstd_get_frame_params(struct zstd_frame_params *params, const void *src,
+	size_t src_size)
+{
+	ZSTD_frameParams p;
+	const size_t ret = ZSTD_getFrameParams(&p, src, src_size);
+
+	/* no-op */
+	zstd_check_frame_params();
+	memcpy(params, &p, sizeof(p));
+	return ret;
+}
+EXPORT_SYMBOL(zstd_get_frame_params);
 
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_DESCRIPTION("Zstd Decompressor");
diff --git a/lib/zstd/error_private.h b/lib/zstd/error_private.h
index 1a60b31f706c..a1a6cdb69c6f 100644
--- a/lib/zstd/error_private.h
+++ b/lib/zstd/error_private.h
@@ -23,7 +23,7 @@
 *  Dependencies
 ******************************************/
 #include <linux/types.h> /* size_t */
-#include <linux/zstd.h>  /* enum list */
+#include "zstd.h"  /* enum list */
 
 /* ****************************************
 *  Compiler-specific
diff --git a/lib/zstd/zstd.h b/lib/zstd/zstd.h
new file mode 100644
index 000000000000..249575e2485f
--- /dev/null
+++ b/lib/zstd/zstd.h
@@ -0,0 +1,1157 @@
+/*
+ * Copyright (c) 2016-present, Yann Collet, Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under the BSD-style license found in the
+ * LICENSE file in the root directory of https://github.com/facebook/zstd.
+ * An additional grant of patent rights can be found in the PATENTS file in the
+ * same directory.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation. This program is dual-licensed; you may select
+ * either version 2 of the GNU General Public License ("GPL") or BSD license
+ * ("BSD").
+ */
+
+#ifndef ZSTD_H
+#define ZSTD_H
+
+/* ======   Dependency   ======*/
+#include <linux/types.h>   /* size_t */
+
+
+/*-*****************************************************************************
+ * Introduction
+ *
+ * zstd, short for Zstandard, is a fast lossless compression algorithm,
+ * targeting real-time compression scenarios at zlib-level and better
+ * compression ratios. The zstd compression library provides in-memory
+ * compression and decompression functions. The library supports compression
+ * levels from 1 up to ZSTD_maxCLevel() which is 22. Levels >= 20, labeled
+ * ultra, should be used with caution, as they require more memory.
+ * Compression can be done in:
+ *  - a single step, reusing a context (described as Explicit memory management)
+ *  - unbounded multiple steps (described as Streaming compression)
+ * The compression ratio achievable on small data can be highly improved using
+ * compression with a dictionary in:
+ *  - a single step (described as Simple dictionary API)
+ *  - a single step, reusing a dictionary (described as Fast dictionary API)
+ ******************************************************************************/
+
+/*======  Helper functions  ======*/
+
+/**
+ * enum ZSTD_ErrorCode - zstd error codes
+ *
+ * Functions that return size_t can be checked for errors using ZSTD_isError()
+ * and the ZSTD_ErrorCode can be extracted using ZSTD_getErrorCode().
+ */
+typedef enum {
+	ZSTD_error_no_error,
+	ZSTD_error_GENERIC,
+	ZSTD_error_prefix_unknown,
+	ZSTD_error_version_unsupported,
+	ZSTD_error_parameter_unknown,
+	ZSTD_error_frameParameter_unsupported,
+	ZSTD_error_frameParameter_unsupportedBy32bits,
+	ZSTD_error_frameParameter_windowTooLarge,
+	ZSTD_error_compressionParameter_unsupported,
+	ZSTD_error_init_missing,
+	ZSTD_error_memory_allocation,
+	ZSTD_error_stage_wrong,
+	ZSTD_error_dstSize_tooSmall,
+	ZSTD_error_srcSize_wrong,
+	ZSTD_error_corruption_detected,
+	ZSTD_error_checksum_wrong,
+	ZSTD_error_tableLog_tooLarge,
+	ZSTD_error_maxSymbolValue_tooLarge,
+	ZSTD_error_maxSymbolValue_tooSmall,
+	ZSTD_error_dictionary_corrupted,
+	ZSTD_error_dictionary_wrong,
+	ZSTD_error_dictionaryCreation_failed,
+	ZSTD_error_maxCode
+} ZSTD_ErrorCode;
+
+/**
+ * ZSTD_maxCLevel() - maximum compression level available
+ *
+ * Return: Maximum compression level available.
+ */
+int ZSTD_maxCLevel(void);
+/**
+ * ZSTD_compressBound() - maximum compressed size in worst case scenario
+ * @srcSize: The size of the data to compress.
+ *
+ * Return:   The maximum compressed size in the worst case scenario.
+ */
+size_t ZSTD_compressBound(size_t srcSize);
+/**
+ * ZSTD_isError() - tells if a size_t function result is an error code
+ * @code:  The function result to check for error.
+ *
+ * Return: Non-zero iff the code is an error.
+ */
+static __attribute__((unused)) unsigned int ZSTD_isError(size_t code)
+{
+	return code > (size_t)-ZSTD_error_maxCode;
+}
+/**
+ * ZSTD_getErrorCode() - translates an error function result to a ZSTD_ErrorCode
+ * @functionResult: The result of a function for which ZSTD_isError() is true.
+ *
+ * Return:          The ZSTD_ErrorCode corresponding to the functionResult or 0
+ *                  if the functionResult isn't an error.
+ */
+static __attribute__((unused)) ZSTD_ErrorCode ZSTD_getErrorCode(
+	size_t functionResult)
+{
+	if (!ZSTD_isError(functionResult))
+		return (ZSTD_ErrorCode)0;
+	return (ZSTD_ErrorCode)(0 - functionResult);
+}
+
+/**
+ * enum ZSTD_strategy - zstd compression search strategy
+ *
+ * From faster to stronger.
+ */
+typedef enum {
+	ZSTD_fast,
+	ZSTD_dfast,
+	ZSTD_greedy,
+	ZSTD_lazy,
+	ZSTD_lazy2,
+	ZSTD_btlazy2,
+	ZSTD_btopt,
+	ZSTD_btopt2
+} ZSTD_strategy;
+
+/**
+ * struct ZSTD_compressionParameters - zstd compression parameters
+ * @windowLog:    Log of the largest match distance. Larger means more
+ *                compression, and more memory needed during decompression.
+ * @chainLog:     Fully searched segment. Larger means more compression, slower,
+ *                and more memory (useless for fast).
+ * @hashLog:      Dispatch table. Larger means more compression,
+ *                slower, and more memory.
+ * @searchLog:    Number of searches. Larger means more compression and slower.
+ * @searchLength: Match length searched. Larger means faster decompression,
+ *                sometimes less compression.
+ * @targetLength: Acceptable match size for optimal parser (only). Larger means
+ *                more compression, and slower.
+ * @strategy:     The zstd compression strategy.
+ */
+typedef struct {
+	unsigned int windowLog;
+	unsigned int chainLog;
+	unsigned int hashLog;
+	unsigned int searchLog;
+	unsigned int searchLength;
+	unsigned int targetLength;
+	ZSTD_strategy strategy;
+} ZSTD_compressionParameters;
+
+/**
+ * struct ZSTD_frameParameters - zstd frame parameters
+ * @contentSizeFlag: Controls whether content size will be present in the frame
+ *                   header (when known).
+ * @checksumFlag:    Controls whether a 32-bit checksum is generated at the end
+ *                   of the frame for error detection.
+ * @noDictIDFlag:    Controls whether dictID will be saved into the frame header
+ *                   when using dictionary compression.
+ *
+ * The default value is all fields set to 0.
+ */
+typedef struct {
+	unsigned int contentSizeFlag;
+	unsigned int checksumFlag;
+	unsigned int noDictIDFlag;
+} ZSTD_frameParameters;
+
+/**
+ * struct ZSTD_parameters - zstd parameters
+ * @cParams: The compression parameters.
+ * @fParams: The frame parameters.
+ */
+typedef struct {
+	ZSTD_compressionParameters cParams;
+	ZSTD_frameParameters fParams;
+} ZSTD_parameters;
+
+/**
+ * ZSTD_getCParams() - returns ZSTD_compressionParameters for selected level
+ * @compressionLevel: The compression level from 1 to ZSTD_maxCLevel().
+ * @estimatedSrcSize: The estimated source size to compress or 0 if unknown.
+ * @dictSize:         The dictionary size or 0 if a dictionary isn't being used.
+ *
+ * Return:            The selected ZSTD_compressionParameters.
+ */
+ZSTD_compressionParameters ZSTD_getCParams(int compressionLevel,
+	unsigned long long estimatedSrcSize, size_t dictSize);
+
+/**
+ * ZSTD_getParams() - returns ZSTD_parameters for selected level
+ * @compressionLevel: The compression level from 1 to ZSTD_maxCLevel().
+ * @estimatedSrcSize: The estimated source size to compress or 0 if unknown.
+ * @dictSize:         The dictionary size or 0 if a dictionary isn't being used.
+ *
+ * The same as ZSTD_getCParams() except also selects the default frame
+ * parameters (all zero).
+ *
+ * Return:            The selected ZSTD_parameters.
+ */
+ZSTD_parameters ZSTD_getParams(int compressionLevel,
+	unsigned long long estimatedSrcSize, size_t dictSize);
+
+/*-*************************************
+ * Explicit memory management
+ **************************************/
+
+/**
+ * ZSTD_CCtxWorkspaceBound() - amount of memory needed to initialize a ZSTD_CCtx
+ * @cParams: The compression parameters to be used for compression.
+ *
+ * If multiple compression parameters might be used, the caller must call
+ * ZSTD_CCtxWorkspaceBound() for each set of parameters and use the maximum
+ * size.
+ *
+ * Return:   A lower bound on the size of the workspace that is passed to
+ *           ZSTD_initCCtx().
+ */
+size_t ZSTD_CCtxWorkspaceBound(ZSTD_compressionParameters cParams);
+
+/**
+ * struct ZSTD_CCtx - the zstd compression context
+ *
+ * When compressing many times it is recommended to allocate a context just once
+ * and reuse it for each successive compression operation.
+ */
+typedef struct ZSTD_CCtx_s ZSTD_CCtx;
+/**
+ * ZSTD_initCCtx() - initialize a zstd compression context
+ * @workspace:     The workspace to emplace the context into. It must outlive
+ *                 the returned context.
+ * @workspaceSize: The size of workspace. Use ZSTD_CCtxWorkspaceBound() to
+ *                 determine how large the workspace must be.
+ *
+ * Return:         A compression context emplaced into workspace.
+ */
+ZSTD_CCtx *ZSTD_initCCtx(void *workspace, size_t workspaceSize);
+
+/**
+ * ZSTD_compressCCtx() - compress src into dst
+ * @ctx:         The context. Must have been initialized with a workspace at
+ *               least as large as ZSTD_CCtxWorkspaceBound(params.cParams).
+ * @dst:         The buffer to compress src into.
+ * @dstCapacity: The size of the destination buffer. May be any size, but
+ *               ZSTD_compressBound(srcSize) is guaranteed to be large enough.
+ * @src:         The data to compress.
+ * @srcSize:     The size of the data to compress.
+ * @params:      The parameters to use for compression. See ZSTD_getParams().
+ *
+ * Return:       The compressed size or an error, which can be checked using
+ *               ZSTD_isError().
+ */
+size_t ZSTD_compressCCtx(ZSTD_CCtx *ctx, void *dst, size_t dstCapacity,
+	const void *src, size_t srcSize, ZSTD_parameters params);
+
+/**
+ * ZSTD_DCtxWorkspaceBound() - amount of memory needed to initialize a ZSTD_DCtx
+ *
+ * Return: A lower bound on the size of the workspace that is passed to
+ *         ZSTD_initDCtx().
+ */
+size_t ZSTD_DCtxWorkspaceBound(void);
+
+/**
+ * struct ZSTD_DCtx - the zstd decompression context
+ *
+ * When decompressing many times it is recommended to allocate a context just
+ * once and reuse it for each successive decompression operation.
+ */
+typedef struct ZSTD_DCtx_s ZSTD_DCtx;
+/**
+ * ZSTD_initDCtx() - initialize a zstd decompression context
+ * @workspace:     The workspace to emplace the context into. It must outlive
+ *                 the returned context.
+ * @workspaceSize: The size of workspace. Use ZSTD_DCtxWorkspaceBound() to
+ *                 determine how large the workspace must be.
+ *
+ * Return:         A decompression context emplaced into workspace.
+ */
+ZSTD_DCtx *ZSTD_initDCtx(void *workspace, size_t workspaceSize);
+
+/**
+ * ZSTD_decompressDCtx() - decompress zstd compressed src into dst
+ * @ctx:         The decompression context.
+ * @dst:         The buffer to decompress src into.
+ * @dstCapacity: The size of the destination buffer. Must be at least as large
+ *               as the decompressed size. If the caller cannot upper bound the
+ *               decompressed size, then it's better to use the streaming API.
+ * @src:         The zstd compressed data to decompress. Multiple concatenated
+ *               frames and skippable frames are allowed.
+ * @srcSize:     The exact size of the data to decompress.
+ *
+ * Return:       The decompressed size or an error, which can be checked using
+ *               ZSTD_isError().
+ */
+size_t ZSTD_decompressDCtx(ZSTD_DCtx *ctx, void *dst, size_t dstCapacity,
+	const void *src, size_t srcSize);
+
+/*-************************
+ * Simple dictionary API
+ **************************/
+
+/**
+ * ZSTD_compress_usingDict() - compress src into dst using a dictionary
+ * @ctx:         The context. Must have been initialized with a workspace at
+ *               least as large as ZSTD_CCtxWorkspaceBound(params.cParams).
+ * @dst:         The buffer to compress src into.
+ * @dstCapacity: The size of the destination buffer. May be any size, but
+ *               ZSTD_compressBound(srcSize) is guaranteed to be large enough.
+ * @src:         The data to compress.
+ * @srcSize:     The size of the data to compress.
+ * @dict:        The dictionary to use for compression.
+ * @dictSize:    The size of the dictionary.
+ * @params:      The parameters to use for compression. See ZSTD_getParams().
+ *
+ * Compression using a predefined dictionary. The same dictionary must be used
+ * during decompression.
+ *
+ * Return:       The compressed size or an error, which can be checked using
+ *               ZSTD_isError().
+ */
+size_t ZSTD_compress_usingDict(ZSTD_CCtx *ctx, void *dst, size_t dstCapacity,
+	const void *src, size_t srcSize, const void *dict, size_t dictSize,
+	ZSTD_parameters params);
+
+/**
+ * ZSTD_decompress_usingDict() - decompress src into dst using a dictionary
+ * @ctx:         The decompression context.
+ * @dst:         The buffer to decompress src into.
+ * @dstCapacity: The size of the destination buffer. Must be at least as large
+ *               as the decompressed size. If the caller cannot upper bound the
+ *               decompressed size, then it's better to use the streaming API.
+ * @src:         The zstd compressed data to decompress. Multiple concatenated
+ *               frames and skippable frames are allowed.
+ * @srcSize:     The exact size of the data to decompress.
+ * @dict:        The dictionary to use for decompression. The same dictionary
+ *               must've been used to compress the data.
+ * @dictSize:    The size of the dictionary.
+ *
+ * Return:       The decompressed size or an error, which can be checked using
+ *               ZSTD_isError().
+ */
+size_t ZSTD_decompress_usingDict(ZSTD_DCtx *ctx, void *dst, size_t dstCapacity,
+	const void *src, size_t srcSize, const void *dict, size_t dictSize);
+
+/*-**************************
+ * Fast dictionary API
+ ***************************/
+
+/**
+ * ZSTD_CDictWorkspaceBound() - memory needed to initialize a ZSTD_CDict
+ * @cParams: The compression parameters to be used for compression.
+ *
+ * Return:   A lower bound on the size of the workspace that is passed to
+ *           ZSTD_initCDict().
+ */
+size_t ZSTD_CDictWorkspaceBound(ZSTD_compressionParameters cParams);
+
+/**
+ * struct ZSTD_CDict - a digested dictionary to be used for compression
+ */
+typedef struct ZSTD_CDict_s ZSTD_CDict;
+
+/**
+ * ZSTD_initCDict() - initialize a digested dictionary for compression
+ * @dictBuffer:    The dictionary to digest. The buffer is referenced by the
+ *                 ZSTD_CDict so it must outlive the returned ZSTD_CDict.
+ * @dictSize:      The size of the dictionary.
+ * @params:        The parameters to use for compression. See ZSTD_getParams().
+ * @workspace:     The workspace. It must outlive the returned ZSTD_CDict.
+ * @workspaceSize: The workspace size. Must be at least
+ *                 ZSTD_CDictWorkspaceBound(params.cParams).
+ *
+ * When compressing multiple messages / blocks with the same dictionary it is
+ * recommended to load it just once. The ZSTD_CDict merely references the
+ * dictBuffer, so it must outlive the returned ZSTD_CDict.
+ *
+ * Return:         The digested dictionary emplaced into workspace.
+ */
+ZSTD_CDict *ZSTD_initCDict(const void *dictBuffer, size_t dictSize,
+	ZSTD_parameters params, void *workspace, size_t workspaceSize);
+
+/**
+ * ZSTD_compress_usingCDict() - compress src into dst using a ZSTD_CDict
+ * @ctx:         The context. Must have been initialized with a workspace at
+ *               least as large as ZSTD_CCtxWorkspaceBound(cParams) where
+ *               cParams are the compression parameters used to initialize the
+ *               cdict.
+ * @dst:         The buffer to compress src into.
+ * @dstCapacity: The size of the destination buffer. May be any size, but
+ *               ZSTD_compressBound(srcSize) is guaranteed to be large enough.
+ * @src:         The data to compress.
+ * @srcSize:     The size of the data to compress.
+ * @cdict:       The digested dictionary to use for compression.
+ * @params:      The parameters to use for compression. See ZSTD_getParams().
+ *
+ * Compression using a digested dictionary. The same dictionary must be used
+ * during decompression.
+ *
+ * Return:       The compressed size or an error, which can be checked using
+ *               ZSTD_isError().
+ */
+size_t ZSTD_compress_usingCDict(ZSTD_CCtx *cctx, void *dst, size_t dstCapacity,
+	const void *src, size_t srcSize, const ZSTD_CDict *cdict);
+
+
+/**
+ * ZSTD_DDictWorkspaceBound() - memory needed to initialize a ZSTD_DDict
+ *
+ * Return:  A lower bound on the size of the workspace that is passed to
+ *          ZSTD_initDDict().
+ */
+size_t ZSTD_DDictWorkspaceBound(void);
+
+/**
+ * struct ZSTD_DDict - a digested dictionary to be used for decompression
+ */
+typedef struct ZSTD_DDict_s ZSTD_DDict;
+
+/**
+ * ZSTD_initDDict() - initialize a digested dictionary for decompression
+ * @dictBuffer:    The dictionary to digest. The buffer is referenced by the
+ *                 ZSTD_DDict so it must outlive the returned ZSTD_DDict.
+ * @dictSize:      The size of the dictionary.
+ * @workspace:     The workspace. It must outlive the returned ZSTD_DDict.
+ * @workspaceSize: The workspace size. Must be at least
+ *                 ZSTD_DDictWorkspaceBound().
+ *
+ * When decompressing multiple messages / blocks with the same dictionary it is
+ * recommended to load it just once. The ZSTD_DDict merely references the
+ * dictBuffer, so it must outlive the returned ZSTD_DDict.
+ *
+ * Return:         The digested dictionary emplaced into workspace.
+ */
+ZSTD_DDict *ZSTD_initDDict(const void *dictBuffer, size_t dictSize,
+	void *workspace, size_t workspaceSize);
+
+/**
+ * ZSTD_decompress_usingDDict() - decompress src into dst using a ZSTD_DDict
+ * @ctx:         The decompression context.
+ * @dst:         The buffer to decompress src into.
+ * @dstCapacity: The size of the destination buffer. Must be at least as large
+ *               as the decompressed size. If the caller cannot upper bound the
+ *               decompressed size, then it's better to use the streaming API.
+ * @src:         The zstd compressed data to decompress. Multiple concatenated
+ *               frames and skippable frames are allowed.
+ * @srcSize:     The exact size of the data to decompress.
+ * @ddict:       The digested dictionary to use for decompression. The same
+ *               dictionary must've been used to compress the data.
+ *
+ * Return:       The decompressed size or an error, which can be checked using
+ *               ZSTD_isError().
+ */
+size_t ZSTD_decompress_usingDDict(ZSTD_DCtx *dctx, void *dst,
+	size_t dstCapacity, const void *src, size_t srcSize,
+	const ZSTD_DDict *ddict);
+
+
+/*-**************************
+ * Streaming
+ ***************************/
+
+/**
+ * struct ZSTD_inBuffer - input buffer for streaming
+ * @src:  Start of the input buffer.
+ * @size: Size of the input buffer.
+ * @pos:  Position where reading stopped. Will be updated.
+ *        Necessarily 0 <= pos <= size.
+ */
+typedef struct ZSTD_inBuffer_s {
+	const void *src;
+	size_t size;
+	size_t pos;
+} ZSTD_inBuffer;
+
+/**
+ * struct ZSTD_outBuffer - output buffer for streaming
+ * @dst:  Start of the output buffer.
+ * @size: Size of the output buffer.
+ * @pos:  Position where writing stopped. Will be updated.
+ *        Necessarily 0 <= pos <= size.
+ */
+typedef struct ZSTD_outBuffer_s {
+	void *dst;
+	size_t size;
+	size_t pos;
+} ZSTD_outBuffer;
+
+
+
+/*-*****************************************************************************
+ * Streaming compression - HowTo
+ *
+ * A ZSTD_CStream object is required to track streaming operation.
+ * Use ZSTD_initCStream() to initialize a ZSTD_CStream object.
+ * ZSTD_CStream objects can be reused multiple times on consecutive compression
+ * operations. It is recommended to re-use ZSTD_CStream in situations where many
+ * streaming operations will be achieved consecutively. Use one separate
+ * ZSTD_CStream per thread for parallel execution.
+ *
+ * Use ZSTD_compressStream() repetitively to consume input stream.
+ * The function will automatically update both `pos` fields.
+ * Note that it may not consume the entire input, in which case `pos < size`,
+ * and it's up to the caller to present again remaining data.
+ * It returns a hint for the preferred number of bytes to use as an input for
+ * the next function call.
+ *
+ * At any moment, it's possible to flush whatever data remains within internal
+ * buffer, using ZSTD_flushStream(). `output->pos` will be updated. There might
+ * still be some content left within the internal buffer if `output->size` is
+ * too small. It returns the number of bytes left in the internal buffer and
+ * must be called until it returns 0.
+ *
+ * ZSTD_endStream() instructs to finish a frame. It will perform a flush and
+ * write frame epilogue. The epilogue is required for decoders to consider a
+ * frame completed. Similar to ZSTD_flushStream(), it may not be able to flush
+ * the full content if `output->size` is too small. In which case, call again
+ * ZSTD_endStream() to complete the flush. It returns the number of bytes left
+ * in the internal buffer and must be called until it returns 0.
+ ******************************************************************************/
+
+/**
+ * ZSTD_CStreamWorkspaceBound() - memory needed to initialize a ZSTD_CStream
+ * @cParams: The compression parameters to be used for compression.
+ *
+ * Return:   A lower bound on the size of the workspace that is passed to
+ *           ZSTD_initCStream() and ZSTD_initCStream_usingCDict().
+ */
+size_t ZSTD_CStreamWorkspaceBound(ZSTD_compressionParameters cParams);
+
+/**
+ * struct ZSTD_CStream - the zstd streaming compression context
+ */
+typedef struct ZSTD_CStream_s ZSTD_CStream;
+
+/*===== ZSTD_CStream management functions =====*/
+/**
+ * ZSTD_initCStream() - initialize a zstd streaming compression context
+ * @params:         The zstd compression parameters.
+ * @pledgedSrcSize: If params.fParams.contentSizeFlag == 1 then the caller must
+ *                  pass the source size (zero means empty source). Otherwise,
+ *                  the caller may optionally pass the source size, or zero if
+ *                  unknown.
+ * @workspace:      The workspace to emplace the context into. It must outlive
+ *                  the returned context.
+ * @workspaceSize:  The size of workspace.
+ *                  Use ZSTD_CStreamWorkspaceBound(params.cParams) to determine
+ *                  how large the workspace must be.
+ *
+ * Return:          The zstd streaming compression context.
+ */
+ZSTD_CStream *ZSTD_initCStream(ZSTD_parameters params,
+	unsigned long long pledgedSrcSize, void *workspace,
+	size_t workspaceSize);
+
+/**
+ * ZSTD_initCStream_usingCDict() - initialize a streaming compression context
+ * @cdict:          The digested dictionary to use for compression.
+ * @pledgedSrcSize: Optionally the source size, or zero if unknown.
+ * @workspace:      The workspace to emplace the context into. It must outlive
+ *                  the returned context.
+ * @workspaceSize:  The size of workspace. Call ZSTD_CStreamWorkspaceBound()
+ *                  with the cParams used to initialize the cdict to determine
+ *                  how large the workspace must be.
+ *
+ * Return:          The zstd streaming compression context.
+ */
+ZSTD_CStream *ZSTD_initCStream_usingCDict(const ZSTD_CDict *cdict,
+	unsigned long long pledgedSrcSize, void *workspace,
+	size_t workspaceSize);
+
+/*===== Streaming compression functions =====*/
+/**
+ * ZSTD_resetCStream() - reset the context using parameters from creation
+ * @zcs:            The zstd streaming compression context to reset.
+ * @pledgedSrcSize: Optionally the source size, or zero if unknown.
+ *
+ * Resets the context using the parameters from creation. Skips dictionary
+ * loading, since it can be reused. If `pledgedSrcSize` is non-zero the frame
+ * content size is always written into the frame header.
+ *
+ * Return:          Zero or an error, which can be checked using ZSTD_isError().
+ */
+size_t ZSTD_resetCStream(ZSTD_CStream *zcs, unsigned long long pledgedSrcSize);
+/**
+ * ZSTD_compressStream() - streaming compress some of input into output
+ * @zcs:    The zstd streaming compression context.
+ * @output: Destination buffer. `output->pos` is updated to indicate how much
+ *          compressed data was written.
+ * @input:  Source buffer. `input->pos` is updated to indicate how much data was
+ *          read. Note that it may not consume the entire input, in which case
+ *          `input->pos < input->size`, and it's up to the caller to present
+ *          remaining data again.
+ *
+ * The `input` and `output` buffers may be any size. Guaranteed to make some
+ * forward progress if `input` and `output` are not empty.
+ *
+ * Return:  A hint for the number of bytes to use as the input for the next
+ *          function call or an error, which can be checked using
+ *          ZSTD_isError().
+ */
+size_t ZSTD_compressStream(ZSTD_CStream *zcs, ZSTD_outBuffer *output,
+	ZSTD_inBuffer *input);
+/**
+ * ZSTD_flushStream() - flush internal buffers into output
+ * @zcs:    The zstd streaming compression context.
+ * @output: Destination buffer. `output->pos` is updated to indicate how much
+ *          compressed data was written.
+ *
+ * ZSTD_flushStream() must be called until it returns 0, meaning all the data
+ * has been flushed. Since ZSTD_flushStream() causes a block to be ended,
+ * calling it too often will degrade the compression ratio.
+ *
+ * Return:  The number of bytes still present within internal buffers or an
+ *          error, which can be checked using ZSTD_isError().
+ */
+size_t ZSTD_flushStream(ZSTD_CStream *zcs, ZSTD_outBuffer *output);
+/**
+ * ZSTD_endStream() - flush internal buffers into output and end the frame
+ * @zcs:    The zstd streaming compression context.
+ * @output: Destination buffer. `output->pos` is updated to indicate how much
+ *          compressed data was written.
+ *
+ * ZSTD_endStream() must be called until it returns 0, meaning all the data has
+ * been flushed and the frame epilogue has been written.
+ *
+ * Return:  The number of bytes still present within internal buffers or an
+ *          error, which can be checked using ZSTD_isError().
+ */
+size_t ZSTD_endStream(ZSTD_CStream *zcs, ZSTD_outBuffer *output);
+
+/**
+ * ZSTD_CStreamInSize() - recommended size for the input buffer
+ *
+ * Return: The recommended size for the input buffer.
+ */
+size_t ZSTD_CStreamInSize(void);
+/**
+ * ZSTD_CStreamOutSize() - recommended size for the output buffer
+ *
+ * When the output buffer is at least this large, it is guaranteed to be large
+ * enough to flush at least one complete compressed block.
+ *
+ * Return: The recommended size for the output buffer.
+ */
+size_t ZSTD_CStreamOutSize(void);
+
+
+
+/*-*****************************************************************************
+ * Streaming decompression - HowTo
+ *
+ * A ZSTD_DStream object is required to track streaming operations.
+ * Use ZSTD_initDStream() to initialize a ZSTD_DStream object.
+ * ZSTD_DStream objects can be re-used multiple times.
+ *
+ * Use ZSTD_decompressStream() repetitively to consume your input.
+ * The function will update both `pos` fields.
+ * If `input->pos < input->size`, some input has not been consumed.
+ * It's up to the caller to present again remaining data.
+ * If `output->pos < output->size`, decoder has flushed everything it could.
+ * Returns 0 iff a frame is completely decoded and fully flushed.
+ * Otherwise it returns a suggested next input size that will never load more
+ * than the current frame.
+ ******************************************************************************/
+
+/**
+ * ZSTD_DStreamWorkspaceBound() - memory needed to initialize a ZSTD_DStream
+ * @maxWindowSize: The maximum window size allowed for compressed frames.
+ *
+ * Return:         A lower bound on the size of the workspace that is passed to
+ *                 ZSTD_initDStream() and ZSTD_initDStream_usingDDict().
+ */
+size_t ZSTD_DStreamWorkspaceBound(size_t maxWindowSize);
+
+/**
+ * struct ZSTD_DStream - the zstd streaming decompression context
+ */
+typedef struct ZSTD_DStream_s ZSTD_DStream;
+/*===== ZSTD_DStream management functions =====*/
+/**
+ * ZSTD_initDStream() - initialize a zstd streaming decompression context
+ * @maxWindowSize: The maximum window size allowed for compressed frames.
+ * @workspace:     The workspace to emplace the context into. It must outlive
+ *                 the returned context.
+ * @workspaceSize: The size of workspace.
+ *                 Use ZSTD_DStreamWorkspaceBound(maxWindowSize) to determine
+ *                 how large the workspace must be.
+ *
+ * Return:         The zstd streaming decompression context.
+ */
+ZSTD_DStream *ZSTD_initDStream(size_t maxWindowSize, void *workspace,
+	size_t workspaceSize);
+/**
+ * ZSTD_initDStream_usingDDict() - initialize streaming decompression context
+ * @maxWindowSize: The maximum window size allowed for compressed frames.
+ * @ddict:         The digested dictionary to use for decompression.
+ * @workspace:     The workspace to emplace the context into. It must outlive
+ *                 the returned context.
+ * @workspaceSize: The size of workspace.
+ *                 Use ZSTD_DStreamWorkspaceBound(maxWindowSize) to determine
+ *                 how large the workspace must be.
+ *
+ * Return:         The zstd streaming decompression context.
+ */
+ZSTD_DStream *ZSTD_initDStream_usingDDict(size_t maxWindowSize,
+	const ZSTD_DDict *ddict, void *workspace, size_t workspaceSize);
+
+/*===== Streaming decompression functions =====*/
+/**
+ * ZSTD_resetDStream() - reset the context using parameters from creation
+ * @zds:   The zstd streaming decompression context to reset.
+ *
+ * Resets the context using the parameters from creation. Skips dictionary
+ * loading, since it can be reused.
+ *
+ * Return: Zero or an error, which can be checked using ZSTD_isError().
+ */
+size_t ZSTD_resetDStream(ZSTD_DStream *zds);
+/**
+ * ZSTD_decompressStream() - streaming decompress some of input into output
+ * @zds:    The zstd streaming decompression context.
+ * @output: Destination buffer. `output.pos` is updated to indicate how much
+ *          decompressed data was written.
+ * @input:  Source buffer. `input.pos` is updated to indicate how much data was
+ *          read. Note that it may not consume the entire input, in which case
+ *          `input.pos < input.size`, and it's up to the caller to present
+ *          remaining data again.
+ *
+ * The `input` and `output` buffers may be any size. Guaranteed to make some
+ * forward progress if `input` and `output` are not empty.
+ * ZSTD_decompressStream() will not consume the last byte of the frame until
+ * the entire frame is flushed.
+ *
+ * Return:  Returns 0 iff a frame is completely decoded and fully flushed.
+ *          Otherwise returns a hint for the number of bytes to use as the input
+ *          for the next function call or an error, which can be checked using
+ *          ZSTD_isError(). The size hint will never load more than the frame.
+ */
+size_t ZSTD_decompressStream(ZSTD_DStream *zds, ZSTD_outBuffer *output,
+	ZSTD_inBuffer *input);
+
+/**
+ * ZSTD_DStreamInSize() - recommended size for the input buffer
+ *
+ * Return: The recommended size for the input buffer.
+ */
+size_t ZSTD_DStreamInSize(void);
+/**
+ * ZSTD_DStreamOutSize() - recommended size for the output buffer
+ *
+ * When the output buffer is at least this large, it is guaranteed to be large
+ * enough to flush at least one complete decompressed block.
+ *
+ * Return: The recommended size for the output buffer.
+ */
+size_t ZSTD_DStreamOutSize(void);
+
+
+/* --- Constants ---*/
+#define ZSTD_MAGICNUMBER            0xFD2FB528   /* >= v0.8.0 */
+#define ZSTD_MAGIC_SKIPPABLE_START  0x184D2A50U
+
+#define ZSTD_CONTENTSIZE_UNKNOWN (0ULL - 1)
+#define ZSTD_CONTENTSIZE_ERROR   (0ULL - 2)
+
+#define ZSTD_WINDOWLOG_MAX_32  27
+#define ZSTD_WINDOWLOG_MAX_64  27
+#define ZSTD_WINDOWLOG_MAX \
+	((unsigned int)(sizeof(size_t) == 4 \
+		? ZSTD_WINDOWLOG_MAX_32 \
+		: ZSTD_WINDOWLOG_MAX_64))
+#define ZSTD_WINDOWLOG_MIN 10
+#define ZSTD_HASHLOG_MAX ZSTD_WINDOWLOG_MAX
+#define ZSTD_HASHLOG_MIN        6
+#define ZSTD_CHAINLOG_MAX     (ZSTD_WINDOWLOG_MAX+1)
+#define ZSTD_CHAINLOG_MIN      ZSTD_HASHLOG_MIN
+#define ZSTD_HASHLOG3_MAX      17
+#define ZSTD_SEARCHLOG_MAX    (ZSTD_WINDOWLOG_MAX-1)
+#define ZSTD_SEARCHLOG_MIN      1
+/* only for ZSTD_fast, other strategies are limited to 6 */
+#define ZSTD_SEARCHLENGTH_MAX   7
+/* only for ZSTD_btopt, other strategies are limited to 4 */
+#define ZSTD_SEARCHLENGTH_MIN   3
+#define ZSTD_TARGETLENGTH_MIN   4
+#define ZSTD_TARGETLENGTH_MAX 999
+
+/* for static allocation */
+#define ZSTD_FRAMEHEADERSIZE_MAX 18
+#define ZSTD_FRAMEHEADERSIZE_MIN  6
+static const size_t ZSTD_frameHeaderSize_prefix = 5;
+static const size_t ZSTD_frameHeaderSize_min = ZSTD_FRAMEHEADERSIZE_MIN;
+static const size_t ZSTD_frameHeaderSize_max = ZSTD_FRAMEHEADERSIZE_MAX;
+/* magic number + skippable frame length */
+static const size_t ZSTD_skippableHeaderSize = 8;
+
+
+/*-*************************************
+ * Compressed size functions
+ **************************************/
+
+/**
+ * ZSTD_findFrameCompressedSize() - returns the size of a compressed frame
+ * @src:     Source buffer. It should point to the start of a zstd encoded frame
+ *           or a skippable frame.
+ * @srcSize: The size of the source buffer. It must be at least as large as the
+ *           size of the frame.
+ *
+ * Return:   The compressed size of the frame pointed to by `src` or an error,
+ *           which can be check with ZSTD_isError().
+ *           Suitable to pass to ZSTD_decompress() or similar functions.
+ */
+size_t ZSTD_findFrameCompressedSize(const void *src, size_t srcSize);
+
+/*-*************************************
+ * Decompressed size functions
+ **************************************/
+/**
+ * ZSTD_getFrameContentSize() - returns the content size in a zstd frame header
+ * @src:     It should point to the start of a zstd encoded frame.
+ * @srcSize: The size of the source buffer. It must be at least as large as the
+ *           frame header. `ZSTD_frameHeaderSize_max` is always large enough.
+ *
+ * Return:   The frame content size stored in the frame header if known.
+ *           `ZSTD_CONTENTSIZE_UNKNOWN` if the content size isn't stored in the
+ *           frame header. `ZSTD_CONTENTSIZE_ERROR` on invalid input.
+ */
+unsigned long long ZSTD_getFrameContentSize(const void *src, size_t srcSize);
+
+/**
+ * ZSTD_findDecompressedSize() - returns decompressed size of a series of frames
+ * @src:     It should point to the start of a series of zstd encoded and/or
+ *           skippable frames.
+ * @srcSize: The exact size of the series of frames.
+ *
+ * If any zstd encoded frame in the series doesn't have the frame content size
+ * set, `ZSTD_CONTENTSIZE_UNKNOWN` is returned. But frame content size is always
+ * set when using ZSTD_compress(). The decompressed size can be very large.
+ * If the source is untrusted, the decompressed size could be wrong or
+ * intentionally modified. Always ensure the result fits within the
+ * application's authorized limits. ZSTD_findDecompressedSize() handles multiple
+ * frames, and so it must traverse the input to read each frame header. This is
+ * efficient as most of the data is skipped, however it does mean that all frame
+ * data must be present and valid.
+ *
+ * Return:   Decompressed size of all the data contained in the frames if known.
+ *           `ZSTD_CONTENTSIZE_UNKNOWN` if the decompressed size is unknown.
+ *           `ZSTD_CONTENTSIZE_ERROR` if an error occurred.
+ */
+unsigned long long ZSTD_findDecompressedSize(const void *src, size_t srcSize);
+
+/*-*************************************
+ * Advanced compression functions
+ **************************************/
+/**
+ * ZSTD_checkCParams() - ensure parameter values remain within authorized range
+ * @cParams: The zstd compression parameters.
+ *
+ * Return:   Zero or an error, which can be checked using ZSTD_isError().
+ */
+size_t ZSTD_checkCParams(ZSTD_compressionParameters cParams);
+
+/**
+ * ZSTD_adjustCParams() - optimize parameters for a given srcSize and dictSize
+ * @srcSize:  Optionally the estimated source size, or zero if unknown.
+ * @dictSize: Optionally the estimated dictionary size, or zero if unknown.
+ *
+ * Return:    The optimized parameters.
+ */
+ZSTD_compressionParameters ZSTD_adjustCParams(
+	ZSTD_compressionParameters cParams, unsigned long long srcSize,
+	size_t dictSize);
+
+/*--- Advanced decompression functions ---*/
+
+/**
+ * ZSTD_isFrame() - returns true iff the buffer starts with a valid frame
+ * @buffer: The source buffer to check.
+ * @size:   The size of the source buffer, must be at least 4 bytes.
+ *
+ * Return: True iff the buffer starts with a zstd or skippable frame identifier.
+ */
+unsigned int ZSTD_isFrame(const void *buffer, size_t size);
+
+/**
+ * ZSTD_getDictID_fromDict() - returns the dictionary id stored in a dictionary
+ * @dict:     The dictionary buffer.
+ * @dictSize: The size of the dictionary buffer.
+ *
+ * Return:    The dictionary id stored within the dictionary or 0 if the
+ *            dictionary is not a zstd dictionary. If it returns 0 the
+ *            dictionary can still be loaded as a content-only dictionary.
+ */
+unsigned int ZSTD_getDictID_fromDict(const void *dict, size_t dictSize);
+
+/**
+ * ZSTD_getDictID_fromDDict() - returns the dictionary id stored in a ZSTD_DDict
+ * @ddict: The ddict to find the id of.
+ *
+ * Return: The dictionary id stored within `ddict` or 0 if the dictionary is not
+ *         a zstd dictionary. If it returns 0 `ddict` will be loaded as a
+ *         content-only dictionary.
+ */
+unsigned int ZSTD_getDictID_fromDDict(const ZSTD_DDict *ddict);
+
+/**
+ * ZSTD_getDictID_fromFrame() - returns the dictionary id stored in a zstd frame
+ * @src:     Source buffer. It must be a zstd encoded frame.
+ * @srcSize: The size of the source buffer. It must be at least as large as the
+ *           frame header. `ZSTD_frameHeaderSize_max` is always large enough.
+ *
+ * Return:   The dictionary id required to decompress the frame stored within
+ *           `src` or 0 if the dictionary id could not be decoded. It can return
+ *           0 if the frame does not require a dictionary, the dictionary id
+ *           wasn't stored in the frame, `src` is not a zstd frame, or `srcSize`
+ *           is too small.
+ */
+unsigned int ZSTD_getDictID_fromFrame(const void *src, size_t srcSize);
+
+/**
+ * struct ZSTD_frameParams - zstd frame parameters stored in the frame header
+ * @frameContentSize: The frame content size, or 0 if not present.
+ * @windowSize:       The window size, or 0 if the frame is a skippable frame.
+ * @dictID:           The dictionary id, or 0 if not present.
+ * @checksumFlag:     Whether a checksum was used.
+ */
+typedef struct {
+	unsigned long long frameContentSize;
+	unsigned int windowSize;
+	unsigned int dictID;
+	unsigned int checksumFlag;
+} ZSTD_frameParams;
+
+/**
+ * ZSTD_getFrameParams() - extracts parameters from a zstd or skippable frame
+ * @fparamsPtr: On success the frame parameters are written here.
+ * @src:        The source buffer. It must point to a zstd or skippable frame.
+ * @srcSize:    The size of the source buffer. `ZSTD_frameHeaderSize_max` is
+ *              always large enough to succeed.
+ *
+ * Return:      0 on success. If more data is required it returns how many bytes
+ *              must be provided to make forward progress. Otherwise it returns
+ *              an error, which can be checked using ZSTD_isError().
+ */
+size_t ZSTD_getFrameParams(ZSTD_frameParams *fparamsPtr, const void *src,
+	size_t srcSize);
+
+/*-*****************************************************************************
+ * Buffer-less and synchronous inner streaming functions
+ *
+ * This is an advanced API, giving full control over buffer management, for
+ * users which need direct control over memory.
+ * But it's also a complex one, with many restrictions (documented below).
+ * Prefer using normal streaming API for an easier experience
+ ******************************************************************************/
+
+/*-*****************************************************************************
+ * Buffer-less streaming compression (synchronous mode)
+ *
+ * A ZSTD_CCtx object is required to track streaming operations.
+ * Use ZSTD_initCCtx() to initialize a context.
+ * ZSTD_CCtx object can be re-used multiple times within successive compression
+ * operations.
+ *
+ * Start by initializing a context.
+ * Use ZSTD_compressBegin(), or ZSTD_compressBegin_usingDict() for dictionary
+ * compression,
+ * or ZSTD_compressBegin_advanced(), for finer parameter control.
+ * It's also possible to duplicate a reference context which has already been
+ * initialized, using ZSTD_copyCCtx()
+ *
+ * Then, consume your input using ZSTD_compressContinue().
+ * There are some important considerations to keep in mind when using this
+ * advanced function :
+ * - ZSTD_compressContinue() has no internal buffer. It uses externally provided
+ *   buffer only.
+ * - Interface is synchronous : input is consumed entirely and produce 1+
+ *   (or more) compressed blocks.
+ * - Caller must ensure there is enough space in `dst` to store compressed data
+ *   under worst case scenario. Worst case evaluation is provided by
+ *   ZSTD_compressBound().
+ *   ZSTD_compressContinue() doesn't guarantee recover after a failed
+ *   compression.
+ * - ZSTD_compressContinue() presumes prior input ***is still accessible and
+ *   unmodified*** (up to maximum distance size, see WindowLog).
+ *   It remembers all previous contiguous blocks, plus one separated memory
+ *   segment (which can itself consists of multiple contiguous blocks)
+ * - ZSTD_compressContinue() detects that prior input has been overwritten when
+ *   `src` buffer overlaps. In which case, it will "discard" the relevant memory
+ *   section from its history.
+ *
+ * Finish a frame with ZSTD_compressEnd(), which will write the last block(s)
+ * and optional checksum. It's possible to use srcSize==0, in which case, it
+ * will write a final empty block to end the frame. Without last block mark,
+ * frames will be considered unfinished (corrupted) by decoders.
+ *
+ * `ZSTD_CCtx` object can be re-used (ZSTD_compressBegin()) to compress some new
+ * frame.
+ ******************************************************************************/
+
+/*=====   Buffer-less streaming compression functions  =====*/
+size_t ZSTD_compressBegin(ZSTD_CCtx *cctx, int compressionLevel);
+size_t ZSTD_compressBegin_usingDict(ZSTD_CCtx *cctx, const void *dict,
+	size_t dictSize, int compressionLevel);
+size_t ZSTD_compressBegin_advanced(ZSTD_CCtx *cctx, const void *dict,
+	size_t dictSize, ZSTD_parameters params,
+	unsigned long long pledgedSrcSize);
+size_t ZSTD_copyCCtx(ZSTD_CCtx *cctx, const ZSTD_CCtx *preparedCCtx,
+	unsigned long long pledgedSrcSize);
+size_t ZSTD_compressBegin_usingCDict(ZSTD_CCtx *cctx, const ZSTD_CDict *cdict,
+	unsigned long long pledgedSrcSize);
+size_t ZSTD_compressContinue(ZSTD_CCtx *cctx, void *dst, size_t dstCapacity,
+	const void *src, size_t srcSize);
+size_t ZSTD_compressEnd(ZSTD_CCtx *cctx, void *dst, size_t dstCapacity,
+	const void *src, size_t srcSize);
+
+
+
+/*-*****************************************************************************
+ * Buffer-less streaming decompression (synchronous mode)
+ *
+ * A ZSTD_DCtx object is required to track streaming operations.
+ * Use ZSTD_initDCtx() to initialize a context.
+ * A ZSTD_DCtx object can be re-used multiple times.
+ *
+ * First typical operation is to retrieve frame parameters, using
+ * ZSTD_getFrameParams(). It fills a ZSTD_frameParams structure which provide
+ * important information to correctly decode the frame, such as the minimum
+ * rolling buffer size to allocate to decompress data (`windowSize`), and the
+ * dictionary ID used.
+ * Note: content size is optional, it may not be present. 0 means unknown.
+ * Note that these values could be wrong, either because of data malformation,
+ * or because an attacker is spoofing deliberate false information. As a
+ * consequence, check that values remain within valid application range,
+ * especially `windowSize`, before allocation. Each application can set its own
+ * limit, depending on local restrictions. For extended interoperability, it is
+ * recommended to support at least 8 MB.
+ * Frame parameters are extracted from the beginning of the compressed frame.
+ * Data fragment must be large enough to ensure successful decoding, typically
+ * `ZSTD_frameHeaderSize_max` bytes.
+ * Result: 0: successful decoding, the `ZSTD_frameParams` structure is filled.
+ *        >0: `srcSize` is too small, provide at least this many bytes.
+ *        errorCode, which can be tested using ZSTD_isError().
+ *
+ * Start decompression, with ZSTD_decompressBegin() or
+ * ZSTD_decompressBegin_usingDict(). Alternatively, you can copy a prepared
+ * context, using ZSTD_copyDCtx().
+ *
+ * Then use ZSTD_nextSrcSizeToDecompress() and ZSTD_decompressContinue()
+ * alternatively.
+ * ZSTD_nextSrcSizeToDecompress() tells how many bytes to provide as 'srcSize'
+ * to ZSTD_decompressContinue().
+ * ZSTD_decompressContinue() requires this _exact_ amount of bytes, or it will
+ * fail.
+ *
+ * The result of ZSTD_decompressContinue() is the number of bytes regenerated
+ * within 'dst' (necessarily <= dstCapacity). It can be zero, which is not an
+ * error; it just means ZSTD_decompressContinue() has decoded some metadata
+ * item. It can also be an error code, which can be tested with ZSTD_isError().
+ *
+ * ZSTD_decompressContinue() needs previous data blocks during decompression, up
+ * to `windowSize`. They should preferably be located contiguously, prior to
+ * current block. Alternatively, a round buffer of sufficient size is also
+ * possible. Sufficient size is determined by frame parameters.
+ * ZSTD_decompressContinue() is very sensitive to contiguity, if 2 blocks don't
+ * follow each other, make sure that either the compressor breaks contiguity at
+ * the same place, or that previous contiguous segment is large enough to
+ * properly handle maximum back-reference.
+ *
+ * A frame is fully decoded when ZSTD_nextSrcSizeToDecompress() returns zero.
+ * Context can then be reset to start a new decompression.
+ *
+ * Note: it's possible to know if next input to present is a header or a block,
+ * using ZSTD_nextInputType(). This information is not required to properly
+ * decode a frame.
+ *
+ * == Special case: skippable frames ==
+ *
+ * Skippable frames allow integration of user-defined data into a flow of
+ * concatenated frames. Skippable frames will be ignored (skipped) by a
+ * decompressor. The format of skippable frames is as follows:
+ * a) Skippable frame ID - 4 Bytes, Little endian format, any value from
+ *    0x184D2A50 to 0x184D2A5F
+ * b) Frame Size - 4 Bytes, Little endian format, unsigned 32-bits
+ * c) Frame Content - any content (User Data) of length equal to Frame Size
+ * For skippable frames ZSTD_decompressContinue() always returns 0.
+ * For skippable frames ZSTD_getFrameParams() returns fparamsPtr->windowLog==0
+ * what means that a frame is skippable.
+ * Note: If fparamsPtr->frameContentSize==0, it is ambiguous: the frame might
+ *       actually be a zstd encoded frame with no content. For purposes of
+ *       decompression, it is valid in both cases to skip the frame using
+ *       ZSTD_findFrameCompressedSize() to find its size in bytes.
+ * It also returns frame size as fparamsPtr->frameContentSize.
+ ******************************************************************************/
+
+/*=====   Buffer-less streaming decompression functions  =====*/
+size_t ZSTD_decompressBegin(ZSTD_DCtx *dctx);
+size_t ZSTD_decompressBegin_usingDict(ZSTD_DCtx *dctx, const void *dict,
+	size_t dictSize);
+void   ZSTD_copyDCtx(ZSTD_DCtx *dctx, const ZSTD_DCtx *preparedDCtx);
+size_t ZSTD_nextSrcSizeToDecompress(ZSTD_DCtx *dctx);
+size_t ZSTD_decompressContinue(ZSTD_DCtx *dctx, void *dst, size_t dstCapacity,
+	const void *src, size_t srcSize);
+typedef enum {
+	ZSTDnit_frameHeader,
+	ZSTDnit_blockHeader,
+	ZSTDnit_block,
+	ZSTDnit_lastBlock,
+	ZSTDnit_checksum,
+	ZSTDnit_skippableFrame
+} ZSTD_nextInputType_e;
+ZSTD_nextInputType_e ZSTD_nextInputType(ZSTD_DCtx *dctx);
+
+/*-*****************************************************************************
+ * Block functions
+ *
+ * Block functions produce and decode raw zstd blocks, without frame metadata.
+ * Frame metadata cost is typically ~18 bytes, which can be non-negligible for
+ * very small blocks (< 100 bytes). User will have to take in charge required
+ * information to regenerate data, such as compressed and content sizes.
+ *
+ * A few rules to respect:
+ * - Compressing and decompressing require a context structure
+ *   + Use ZSTD_initCCtx() and ZSTD_initDCtx()
+ * - It is necessary to init context before starting
+ *   + compression : ZSTD_compressBegin()
+ *   + decompression : ZSTD_decompressBegin()
+ *   + variants _usingDict() are also allowed
+ *   + copyCCtx() and copyDCtx() work too
+ * - Block size is limited, it must be <= ZSTD_getBlockSizeMax()
+ *   + If you need to compress more, cut data into multiple blocks
+ *   + Consider using the regular ZSTD_compress() instead, as frame metadata
+ *     costs become negligible when source size is large.
+ * - When a block is considered not compressible enough, ZSTD_compressBlock()
+ *   result will be zero. In which case, nothing is produced into `dst`.
+ *   + User must test for such outcome and deal directly with uncompressed data
+ *   + ZSTD_decompressBlock() doesn't accept uncompressed data as input!!!
+ *   + In case of multiple successive blocks, decoder must be informed of
+ *     uncompressed block existence to follow proper history. Use
+ *     ZSTD_insertBlock() in such a case.
+ ******************************************************************************/
+
+/* Define for static allocation */
+#define ZSTD_BLOCKSIZE_ABSOLUTEMAX (128 * 1024)
+/*=====   Raw zstd block functions  =====*/
+size_t ZSTD_getBlockSizeMax(ZSTD_CCtx *cctx);
+size_t ZSTD_compressBlock(ZSTD_CCtx *cctx, void *dst, size_t dstCapacity,
+	const void *src, size_t srcSize);
+size_t ZSTD_decompressBlock(ZSTD_DCtx *dctx, void *dst, size_t dstCapacity,
+	const void *src, size_t srcSize);
+size_t ZSTD_insertBlock(ZSTD_DCtx *dctx, const void *blockStart,
+	size_t blockSize);
+
+#endif  /* ZSTD_H */
diff --git a/lib/zstd/zstd_internal.h b/lib/zstd/zstd_internal.h
index dac753397f86..db12614117f9 100644
--- a/lib/zstd/zstd_internal.h
+++ b/lib/zstd/zstd_internal.h
@@ -28,6 +28,7 @@
 ***************************************/
 #include "error_private.h"
 #include "mem.h"
+#include "zstd.h"
 #include <linux/compiler.h>
 #include <linux/kernel.h>
 #include <linux/xxhash.h>
