@@ -16,6 +16,7 @@
#define HASH_DMA_ALIGN_SIZE 4
#define HASH_DMA_PERFORMANCE_MIN_SIZE 1024
#define HASH_BYTES_PER_WORD 4
+#define UX500_HASH_AUTOSUSPEND_DELAY_MS 50
/* Number of context swap registers */
#define HASH_CSR_COUNT 52
@@ -221,8 +222,6 @@ struct hash_device_data {
struct device *dev;
spinlock_t ctx_lock;
struct hash_ctx *current_ctx;
- bool power_state;
- spinlock_t power_state_lock;
struct regulator *regulator;
struct clk *clk;
struct hash_dma dma;
@@ -24,6 +24,7 @@
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/crypto.h>
#include <linux/dmaengine.h>
@@ -240,57 +241,6 @@ static int get_empty_message_digest(
return ret;
}
-/**
- * hash_disable_power - Request to disable power and clock.
- * @device_data: Structure for the hash device.
- *
- * This function request for disabling the clock.
- */
-static int hash_disable_power(struct hash_device_data *device_data)
-{
- int ret = 0;
-
- spin_lock(&device_data->power_state_lock);
- if (!device_data->power_state)
- goto out;
-
- clk_disable(device_data->clk);
-
- device_data->power_state = false;
-
-out:
- spin_unlock(&device_data->power_state_lock);
-
- return ret;
-}
-
-/**
- * hash_enable_power - Request to enable power and clock.
- * @device_data: Structure for the hash device.
- *
- * This function request for enabling the clock.
- */
-static int hash_enable_power(struct hash_device_data *device_data)
-{
- int ret = 0;
- struct device *dev = device_data->dev;
-
- spin_lock(&device_data->power_state_lock);
- if (!device_data->power_state) {
- ret = clk_enable(device_data->clk);
- if (ret) {
- dev_err(dev, "%s: clk_enable() failed!\n", __func__);
- goto out;
- }
- device_data->power_state = true;
- }
-
-out:
- spin_unlock(&device_data->power_state_lock);
-
- return ret;
-}
-
static void hash_wait_for_dcal(struct hash_device_data *device_data)
{
unsigned int val;
@@ -449,6 +399,10 @@ static int ux500_hash_init(struct ahash_request *req)
struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
+ struct hash_device_data *device_data = ctx->device;
+
+ /* Power up on init() power down on final() */
+ pm_runtime_get_sync(device_data->dev);
if (!ctx->key)
ctx->keylen = 0;
@@ -474,6 +428,7 @@ static int ux500_hash_init(struct ahash_request *req)
}
}
}
+
return 0;
}
@@ -782,6 +737,8 @@ static int hash_dma_final(struct ahash_request *req)
memcpy(req->result, digest, ctx->digestsize);
out:
+ pm_runtime_mark_last_busy(device_data->dev);
+ pm_runtime_put_autosuspend(device_data->dev);
/**
* Allocated in setkey, and only used in HMAC.
*/
@@ -1040,8 +997,11 @@ static int ahash_update(struct ahash_request *req)
*/
static int ahash_final(struct ahash_request *req)
{
- int ret = 0;
+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+ struct hash_ctx *ctx = crypto_ahash_ctx(tfm);
+ struct hash_device_data *device_data = ctx->device;
struct hash_req_ctx *req_ctx = ahash_request_ctx(req);
+ int ret = 0;
pr_debug("%s: data size: %d\n", __func__, req->nbytes);
@@ -1050,6 +1010,9 @@ static int ahash_final(struct ahash_request *req)
else
ret = hash_hw_final(req);
+ pm_runtime_mark_last_busy(device_data->dev);
+ pm_runtime_put_autosuspend(device_data->dev);
+
if (ret) {
pr_err("%s: hash_hw/dma_final() failed\n", __func__);
}
@@ -1150,6 +1113,9 @@ static int ahash_import(struct ahash_request *req, const void *in)
req_ctx->hw_initialized = hstate->hw_initialized;
memcpy(req_ctx->buffer, hstate->buffer, HASH_BLOCK_SIZE);
+ /* Power up as we may have lost power being exported */
+ pm_runtime_get_sync(device_data->dev);
+
/*
* Restore hardware state
* INIT bit. Set this bit to 0b1 to reset the HASH processor core and
@@ -1217,6 +1183,10 @@ static int ahash_export(struct ahash_request *req, void *out)
hstate->hw_initialized = req_ctx->hw_initialized;
memcpy(hstate->buffer, req_ctx->buffer, HASH_BLOCK_SIZE);
+ /* We can power down while exported */
+ pm_runtime_mark_last_busy(device_data->dev);
+ pm_runtime_put_autosuspend(device_data->dev);
+
return 0;
}
@@ -1593,7 +1563,6 @@ static int ux500_hash_probe(struct platform_device *pdev)
*/
regcache_cache_bypass(device_data->map, true);
spin_lock_init(&device_data->ctx_lock);
- spin_lock_init(&device_data->power_state_lock);
device_data->clk = devm_clk_get(dev, NULL);
if (IS_ERR(device_data->clk)) {
@@ -1602,25 +1571,24 @@ static int ux500_hash_probe(struct platform_device *pdev)
goto out;
}
- ret = clk_prepare(device_data->clk);
+ ret = clk_prepare_enable(device_data->clk);
if (ret) {
- dev_err(dev, "%s: clk_prepare() failed!\n", __func__);
+ dev_err(dev, "%s: clk_prepare_enable() failed!\n", __func__);
goto out;
}
- /* Enable device power (and clock) */
- ret = hash_enable_power(device_data);
- if (ret) {
- dev_err(dev, "%s: hash_enable_power() failed!\n", __func__);
- goto out_clk_unprepare;
- }
-
ret = hash_check_hw(device_data);
if (ret) {
dev_err(dev, "%s: hash_check_hw() failed!\n", __func__);
- goto out_power;
+ goto out_clk;
}
+ pm_runtime_set_autosuspend_delay(dev, UX500_HASH_AUTOSUSPEND_DELAY_MS);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_get_noresume(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
if (hash_mode == HASH_MODE_DMA)
hash_dma_setup_channel(device_data, dev);
@@ -1630,18 +1598,20 @@ static int ux500_hash_probe(struct platform_device *pdev)
if (ret) {
dev_err(dev, "%s: ahash_algs_register_all() failed!\n",
__func__);
- goto out_power;
+ goto out_pm_disable;
}
+ pm_runtime_put_sync(dev);
dev_info(dev, "successfully registered\n");
- return 0;
-
-out_power:
- hash_disable_power(device_data);
-out_clk_unprepare:
- clk_unprepare(device_data->clk);
+ return 0;
+out_pm_disable:
+ pm_runtime_get_sync(device_data->dev);
+ pm_runtime_put_noidle(device_data->dev);
+ pm_runtime_disable(device_data->dev);
+out_clk:
+ clk_disable_unprepare(device_data->clk);
out:
return ret;
}
@@ -1675,11 +1645,10 @@ static int ux500_hash_remove(struct platform_device *pdev)
ahash_algs_unregister_all(device_data);
- if (hash_disable_power(device_data))
- dev_err(dev, "%s: hash_disable_power() failed\n",
- __func__);
-
- clk_unprepare(device_data->clk);
+ pm_runtime_get_sync(device_data->dev);
+ pm_runtime_put_noidle(device_data->dev);
+ pm_runtime_disable(device_data->dev);
+ clk_disable_unprepare(device_data->clk);
return 0;
}
@@ -1714,17 +1683,17 @@ static void ux500_hash_shutdown(struct platform_device *pdev)
ahash_algs_unregister_all(device_data);
- if (hash_disable_power(device_data))
- dev_err(&pdev->dev, "%s: hash_disable_power() failed\n",
- __func__);
+ pm_runtime_get_sync(device_data->dev);
+ pm_runtime_put_noidle(device_data->dev);
+ pm_runtime_disable(device_data->dev);
+ clk_disable_unprepare(device_data->clk);
}
-#ifdef CONFIG_PM_SLEEP
/**
- * ux500_hash_suspend - Function that suspends the hash device.
+ * ux500_hash_runtime_suspend - Function that suspends the hash device.
* @dev: Device to suspend.
*/
-static int ux500_hash_suspend(struct device *dev)
+static int __maybe_unused ux500_hash_runtime_suspend(struct device *dev)
{
int ret;
struct hash_device_data *device_data;
@@ -1735,21 +1704,20 @@ static int ux500_hash_suspend(struct device *dev)
return -ENOMEM;
}
- ret = hash_disable_power(device_data);
- if (ret)
- dev_err(dev, "%s: hash_disable_power()\n", __func__);
+ clk_disable_unprepare(device_data->clk);
+ dev_info(dev, "runtime suspended\n");
return ret;
}
/**
- * ux500_hash_resume - Function that resume the hash device.
+ * ux500_hash_runtime_resume - Function that resume the hash device.
* @dev: Device to resume.
*/
-static int ux500_hash_resume(struct device *dev)
+static int __maybe_unused ux500_hash_runtime_resume(struct device *dev)
{
- int ret = 0;
struct hash_device_data *device_data;
+ int ret;
device_data = dev_get_drvdata(dev);
if (!device_data) {
@@ -1757,15 +1725,23 @@ static int ux500_hash_resume(struct device *dev)
return -ENOMEM;
}
- ret = hash_enable_power(device_data);
- if (ret)
- dev_err(dev, "%s: hash_enable_power() failed!\n", __func__);
+ ret = clk_prepare_enable(device_data->clk);
+ if (ret) {
+ dev_err(dev, "%s: clk_enable() failed!\n", __func__);
+ return ret;
+ }
- return ret;
+ dev_info(dev, "runtime resumed\n");
+
+ return 0;
}
-#endif
-static SIMPLE_DEV_PM_OPS(ux500_hash_pm, ux500_hash_suspend, ux500_hash_resume);
+static const struct dev_pm_ops ux500_hash_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ SET_RUNTIME_PM_OPS(ux500_hash_runtime_suspend,
+ ux500_hash_runtime_resume, NULL)
+};
static const struct of_device_id ux500_hash_match[] = {
{ .compatible = "stericsson,ux500-hash" },
@@ -1780,7 +1756,7 @@ static struct platform_driver ux500_hash_driver = {
.driver = {
.name = "hash1",
.of_match_table = ux500_hash_match,
- .pm = &ux500_hash_pm,
+ .pm = &ux500_hash_pm_ops,
}
};
module_platform_driver(ux500_hash_driver);
This implements runtime PM to gate the clock and regulator when the hash block is unused. Drop the own-invented "power state" and its associated lock: we don't need that when we have runtime PM. Delete the specific power functions and just enable/disable the clock in the runtime PM functions. Use the full *_prepare_enable() and *disable_unprepare() calls for really making sure the clock is off. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v2->v3: - Rebased on v6.0-rc1 ChangeLog v1->v2: - New patch to clean up also the custom PM. --- drivers/crypto/ux500/hash/hash_alg.h | 3 +- drivers/crypto/ux500/hash/hash_core.c | 164 +++++++++++--------------- 2 files changed, 71 insertions(+), 96 deletions(-)