| Message ID | 20230518141105.24741-5-quic_anusha@quicinc.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Enable crypto for ipq9574 | expand |
On 18/05/2023 16:11, Anusha Rao wrote: > Enable crypto support for ipq9574. > > Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> > --- Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On 5/18/23 7:41 PM, Anusha Rao <quic_anusha@quicinc.com> wrote: > Enable crypto support for ipq9574. > > Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> > --- > Changes in V3: > - No change. > > arch/arm64/boot/dts/qcom/ipq9574.dtsi | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > index fea15f3cf910..6e52d35a6a15 100644 > --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi > +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > @@ -123,6 +123,26 @@ > clock-names = "core"; > }; > > + cryptobam: dma-controller@704000 { > + compatible = "qcom,bam-v1.7.0"; Please confirm if this is "qcom,bam-v1.7.4" or "qcom,bam-v1.7.0". If "qcom,bam-v1.7.4" please use the newer compatible format. Thanks, Bhupesh > + reg = <0x00704000 0x20000>; > + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; > + #dma-cells = <1>; > + qcom,ee = <1>; > + qcom,controlled-remotely; > + }; > + > + crypto: crypto@73a000 { > + compatible = "qcom,ipq9574-qce", "qcom,ipq4019-qce", "qcom,qce"; > + reg = <0x0073a000 0x6000>; > + clocks = <&gcc GCC_CRYPTO_AHB_CLK>, > + <&gcc GCC_CRYPTO_AXI_CLK>, > + <&gcc GCC_CRYPTO_CLK>; > + clock-names = "iface", "bus", "core"; > + dmas = <&cryptobam 2>, <&cryptobam 3>; > + dma-names = "rx", "tx"; > + }; > + > tlmm: pinctrl@1000000 { > compatible = "qcom,ipq9574-tlmm"; > reg = <0x01000000 0x300000>; >
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi index fea15f3cf910..6e52d35a6a15 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -123,6 +123,26 @@ clock-names = "core"; }; + cryptobam: dma-controller@704000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x00704000 0x20000>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <1>; + qcom,controlled-remotely; + }; + + crypto: crypto@73a000 { + compatible = "qcom,ipq9574-qce", "qcom,ipq4019-qce", "qcom,qce"; + reg = <0x0073a000 0x6000>; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_CLK>; + clock-names = "iface", "bus", "core"; + dmas = <&cryptobam 2>, <&cryptobam 3>; + dma-names = "rx", "tx"; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,ipq9574-tlmm"; reg = <0x01000000 0x300000>;
Enable crypto support for ipq9574. Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> --- Changes in V3: - No change. arch/arm64/boot/dts/qcom/ipq9574.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)