mbox series

[net-next,v5,00/10] net: axienet: Introduce dmaengine

Message ID 1691387509-2113129-1-git-send-email-radhey.shyam.pandey@amd.com
Headers show
Series net: axienet: Introduce dmaengine | expand

Message

Radhey Shyam Pandey Aug. 7, 2023, 5:51 a.m. UTC 
The axiethernet driver can use the dmaengine framework to communicate
with the xilinx DMAengine driver(AXIDMA, MCDMA). The inspiration behind
this dmaengine adoption is to reuse the in-kernel xilinx dma engine
driver[1] and remove redundant dma programming sequence[2] from the
ethernet driver. This simplifies the ethernet driver and also makes
it generic to be hooked to any complaint dma IP i.e AXIDMA, MCDMA
without any modification.

The dmaengine framework was extended for metadata API support during
the axidma RFC[3] discussion. However, it still needs further
enhancements to make it well suited for ethernet usecases.

Comments, suggestions, thoughts to implement remaining functional
features are very welcome!

[1]: https://github.com/torvalds/linux/blob/master/drivers/dma/xilinx/xilinx_dma.c
[2]: https://github.com/torvalds/linux/blob/master/drivers/net/ethernet/xilinx/xilinx_axienet_main.c#L238
[3]: http://lkml.iu.edu/hypermail/linux/kernel/1804.0/00367.html
[4]: https://lore.kernel.org/all/20221124102745.2620370-1-sarath.babu.naidu.gaddam@amd.com


Changes in v5:
- Fix git am failure on net-next
- Addressed DT binding review comments i.e Modified commit description to
  remove dmaengine framework references and instead describe how
  axiethernet IP uses DMA channels.
- Fix "^[tr]x_chan[0-9]|1[0-5]$" -> "^[tr]x_chan([0-9]|1[0-5])$"
- Drop generic dmas description.
- Fix kmem_cache resource leak.
- Merge Xilinx DMA enhancements and optimization[4] into this series.

Changes in V4:
- Updated commit description about tx/rx channels name(1/3).
- Removed "dt-bindings" and "dmaengine" strings in subject(1/3).
- Extended dmas and dma-names to support MCDMA channel names(1/3).
- Rename has_dmas to use_dmaegine(2/3).
- Remove the AXIENET_USE_DMA(2/3).
- Remove the AXIENET_USE_DMA(3/3).
- Add dev_err_probe for dma_request_chan error handling(3/3).
- Add kmem_cache_destroy for create in axienet_setup_dma_chan(3/3).

Changes in V3:
- Moved RFC to PATCH.
- Removed ethtool get/set coalesce, will be added later.
- Added backward comapatible support.
- Split the dmaengine support patch of V2 into two patches(2/3 and 3/3).
https://lore.kernel.org/all/20220920055703.13246-4-sarath.babu.naidu.gaddam@amd.com/

Changes in V2:
- Add ethtool get/set coalesce and DMA reset using DMAengine framework.
- Add performance numbers.
- Remove .txt and change the name of file to xlnx,axiethernet.yaml.
- Fix DT check warning(Fix DT check warning('device_type' does not match
   any of the regexes:'pinctrl-[0-9]+' From schema: Documentation/
   devicetree/bindings/net/xilinx_axienet.yaml).

Radhey Shyam Pandey (9):
  dt-bindings: dmaengine: xilinx_dma:Add xlnx,axistream-connected
    property
  dt-bindings: dmaengine: xilinx_dma: Add xlnx,irq-delay property
  dmaengine: xilinx_dma: Pass AXI4-Stream control words to dma client
  dmaengine: xilinx_dma: Increase AXI DMA transaction segment count
  dmaengine: xilinx_dma: Freeup active list based on descriptor
    completion bit
  dmaengine: xilinx_dma: Use tasklet_hi_schedule for timing critical
    usecase
  dmaengine: xilinx_dma: Program interrupt delay timeout
  dt-bindings: net: xlnx,axi-ethernet: Introduce DMA support
  net: axienet: Introduce dmaengine support

Sarath Babu Naidu Gaddam (1):
  net: axienet: Preparatory changes for dmaengine support

 .../bindings/dma/xilinx/xilinx_dma.txt        |   6 +
 .../bindings/net/xlnx,axi-ethernet.yaml       |  16 +
 drivers/dma/xilinx/xilinx_dma.c               |  70 +-
 drivers/net/ethernet/xilinx/Kconfig           |   1 +
 drivers/net/ethernet/xilinx/xilinx_axienet.h  |  10 +
 .../net/ethernet/xilinx/xilinx_axienet_main.c | 622 ++++++++++++++----
 6 files changed, 591 insertions(+), 134 deletions(-)

Comments

Jakub Kicinski Aug. 8, 2023, 10:53 p.m. UTC | #1 
On Mon, 7 Aug 2023 11:21:39 +0530 Radhey Shyam Pandey wrote:
> The axiethernet driver can use the dmaengine framework to communicate
> with the xilinx DMAengine driver(AXIDMA, MCDMA). The inspiration behind
> this dmaengine adoption is to reuse the in-kernel xilinx dma engine
> driver[1] and remove redundant dma programming sequence[2] from the
> ethernet driver. This simplifies the ethernet driver and also makes
> it generic to be hooked to any complaint dma IP i.e AXIDMA, MCDMA
> without any modification.
> 
> The dmaengine framework was extended for metadata API support during
> the axidma RFC[3] discussion. However, it still needs further
> enhancements to make it well suited for ethernet usecases.
> 
> Comments, suggestions, thoughts to implement remaining functional
> features are very welcome!

Vinod, any preference on how this gets merged?
Since we're already at -rc5 if the dmaengine parts look good to you 
taking those in for 6.6 and delaying the networking bits until 6.7
could be on the table? Possibly?