mbox series

[0/3] phy: cadence: j721e-wiz: Add Type-C plug flip support

Message ID 20191022132249.869-1-rogerq@ti.com
Headers show
Series phy: cadence: j721e-wiz: Add Type-C plug flip support | expand

Message

Roger Quadros Oct. 22, 2019, 1:22 p.m. UTC 
Hi,

On J721e platform, the 2 lanes of SERDES PHY are used to achieve
USB Type-C plug flip support without any additional MUX component
by using a lane swap feature.

However, the driver needs to know the Type-C plug orientation before
it can decide whether to swap the lanes or not. This is achieved via a
GPIO named DIR.

Another constraint is that the lane swap must happen only when the PHY
is in inactive state. This is achieved by sampling the GPIO and
programming the lane swap before bringing the PHY out of reset.

This series adds support to read the GPIO and accordingly program
the Lane swap for Type-C plug flip support.

Series must be applied on top of
https://lkml.org/lkml/2019/10/16/517

cheers,
-roger

Roger Quadros (3):
  phy: cadence: Sierra: add phy_reset hook
  dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO
  phy: ti: j721e-wiz: Manage typec-gpio-dir

 .../bindings/phy/ti,phy-j721e-wiz.txt         |  9 ++++
 drivers/phy/cadence/phy-cadence-sierra.c      | 10 +++++
 drivers/phy/ti/phy-j721e-wiz.c                | 41 +++++++++++++++++++
 3 files changed, 60 insertions(+)

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki