mbox series

[v2,0/2] Add IMX296 CMOS image sensor support

Message ID 20191025175118.13307-1-manivannan.sadhasivam@linaro.org
Headers show
Series Add IMX296 CMOS image sensor support | expand

Message

Manivannan Sadhasivam Oct. 25, 2019, 5:51 p.m. UTC 
Hello,

This patchset adds support for IMX296 CMOS image sensor from Sony.
Sensor can be programmed through I2C and 4-wire interface but the
current driver only supports I2C interface. The sensor is
capable of outputting frames in CSI2 format (1 Lane). In the case
of sensor resolution, driver only supports 1440x1088 at 30 FPS.

The driver has been validated using Framos IMX296 module interfaced to
96Boards Dragonboard410c.

Thanks,
Mani

Changes in v2:

* Switched to YAML binding

Manivannan Sadhasivam (2):
  dt-bindings: media: i2c: Add IMX296 CMOS sensor binding
  media: i2c: Add IMX296 CMOS image sensor driver

 .../devicetree/bindings/media/i2c/imx296.yaml |  98 +++
 MAINTAINERS                                   |   8 +
 drivers/media/i2c/Kconfig                     |  11 +
 drivers/media/i2c/Makefile                    |   1 +
 drivers/media/i2c/imx296.c                    | 733 ++++++++++++++++++
 5 files changed, 851 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/imx296.yaml
 create mode 100644 drivers/media/i2c/imx296.c

-- 
2.17.1