mbox series

[0/9] arm64: dts: ti: UDMAP and McASP support

Message ID 20191112143301.3168-1-peter.ujfalusi@ti.com
Headers show
Series arm64: dts: ti: UDMAP and McASP support | expand

Message

Peter Ujfalusi Nov. 12, 2019, 2:32 p.m. UTC 
Hi,

This series will enable DMA and adds the McASP nodes for am654 and j721e.

The DT bindings for DMA is not expected to change much anymore:
v5 of the UDMAP bindings patch is:
https://lore.kernel.org/lkml/20191111135330.8235-9-peter.ujfalusi@ti.com/

While adding the DMA support I have noticed few issues which is also fixed by
this series.

I have included the McASP nodes as well to have examples for other peripherals
on how he binding should be used.

I have been using this set on top of linux-next (the series is generated on top
of next-20191112) with audio on am654-evm and j721e evm + ivi card.

Regards,
Peter
---
Peter Ujfalusi (9):
  arm64: dts: ti: k3-am65-main: Correct main NAVSS representation
  arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss
  arm64: dts: ti: k3-am65: DMA support
  arm64: dts: ti: k3-am654-main: Add McASP nodes
  arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS
  arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation
  arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under
    main_navss
  arm64: dts: ti: k3-j721e: DMA support
  arm64: dts: ti: k3-j721e-main: Add McASP nodes

 arch/arm64/boot/dts/ti/k3-am65-main.dtsi      | 122 ++++++-
 arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi       |  46 +++
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 312 ++++++++++++++++--
 .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi      |  45 +++
 arch/arm64/boot/dts/ti/k3-j721e.dtsi          |   2 +-
 5 files changed, 491 insertions(+), 36 deletions(-)

-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki