[v4,0/5] Add support for SCMIv3.0 Voltage Domain Protocol and SCMI-Regulator

Hi,

this series introduces the support for the new SCMI Voltage Domain Protocol
defined by the upcoming SCMIv3.0 specification, whose BETA release is
available at [1].

Afterwards, a new generic SCMI Regulator driver is developed on top of the
new SCMI VD Protocol.

Patch 3/5 introduces a needed fix in Regulator framework to cope with
generic named nodes.

The series is currently based on for-next/scmi [2] on top of:

commit b9ceca6be432 ("firmware: arm_scmi: Fix duplicate workqueue name")

Any feedback welcome,

Thanks,

Cristian

---

v3 --> v4
- DT bindings
 - using generic node names
 - listing explicitly subset of supported regulators bindings
- SCMI Regulator
 - using of_match_full_name core regulator flag
 - avoid coccinelle false flag complaints
- VD Protocol
 - avoid coccinelle false flag complaints
 - avoiding fixed size typing

v2 --> v3
- DT bindings
  - avoid awkard examples based on _cpu/_gpu regulators
- SCMI Regulator
  - remove multiple linear mappings support
  - removed duplicated voltage name printout
  - added a few comments
  - simplified return path in scmi_reg_set_voltage_sel()
- VD Protocol
  - restrict segmented voltage domain descriptors to one triplet
  - removed unneeded inline
  - free allocated resources for invalid voltage domain
  - added __must_check to info_get voltage operations
  - added a few comments
  - removed fixed size typing from struct voltage_info
    
v1 --> v2
- rebased on for-next/scmi v5.10
- DT bindings
  - removed any reference to negative voltages
- SCMI Regulator
  - removed duplicate regulator naming
  - removed redundant .get/set_voltage ops: only _sel variants implemented
  - removed condexpr on fail path to increase readability
- VD Protocol
  - fix voltage levels query loop to reload full cmd description
    between iterations as reported by Etienne Carriere
  - ensure transport rx buffer is properly sized calli scmi_reset_rx_to_maxsz
    between transfers

[1]:https://developer.arm.com/documentation/den0056/c/
[2]:https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux.git/log/?h=for-next/scmi


Cristian Marussi (5):
  firmware: arm_scmi: Add Voltage Domain Support
  firmware: arm_scmi: add SCMI Voltage Domain devname
  regulator: core: add of_match_full_name boolean flag
  regulator: add SCMI driver
  dt-bindings: arm: add support for SCMI Regulators

 .../devicetree/bindings/arm/arm,scmi.txt      |  43 ++
 drivers/firmware/arm_scmi/Makefile            |   2 +-
 drivers/firmware/arm_scmi/common.h            |   1 +
 drivers/firmware/arm_scmi/driver.c            |   3 +
 drivers/firmware/arm_scmi/voltage.c           | 397 +++++++++++++++++
 drivers/regulator/Kconfig                     |   9 +
 drivers/regulator/Makefile                    |   1 +
 drivers/regulator/of_regulator.c              |   8 +-
 drivers/regulator/scmi-regulator.c            | 409 ++++++++++++++++++
 include/linux/regulator/driver.h              |   3 +
 include/linux/scmi_protocol.h                 |  64 +++
 11 files changed, 937 insertions(+), 3 deletions(-)
 create mode 100644 drivers/firmware/arm_scmi/voltage.c
 create mode 100644 drivers/regulator/scmi-regulator.c