mbox series

[0/4] Add support for Qcom SMEM based NAND parser

Message ID 20201117173909.23585-1-manivannan.sadhasivam@linaro.org
Headers show
Series Add support for Qcom SMEM based NAND parser | expand

Message

Manivannan Sadhasivam Nov. 17, 2020, 5:39 p.m. UTC 
Hello,

This series adds support for parsing the partitions defined in Shared
Memory (SMEM) of the Qualcomm platforms supporting NAND interface.
Current parser only supports V3 and V4 of the partition tables.

This series has been tested on SDX55 MTP board which has an onboard NAND
device.

Thanks,
Mani

Manivannan Sadhasivam (4):
  dt-bindings: mtd: partitions: Add binding for Qcom SMEM parser
  mtd: parsers: Add Qcom SMEM parser
  mtd: rawnand: qcom: Add support for Qcom SMEM parser
  mtd: parsers: afs: Fix freeing the part name memory in failure

 .../mtd/partitions/qcom,smem-part.yaml        |  31 ++++
 drivers/mtd/nand/raw/qcom_nandc.c             |   4 +-
 drivers/mtd/parsers/Kconfig                   |   8 +
 drivers/mtd/parsers/Makefile                  |   1 +
 drivers/mtd/parsers/afs.c                     |   4 +-
 drivers/mtd/parsers/qcomsmempart.c            | 169 ++++++++++++++++++
 6 files changed, 213 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
 create mode 100644 drivers/mtd/parsers/qcomsmempart.c