mbox series

[v5,0/2] Add support for ANX7688

Message ID 20210305124351.15079-1-dafna.hirschfeld@collabora.com
Headers show
Series Add support for ANX7688 | expand

Message

Dafna Hirschfeld March 5, 2021, 12:43 p.m. UTC 
ANX7688 is a typec port controller that also converts HDMI to DP.
ANX7688 is found on Acer Chromebook R13 (elm) and on Pine64 PinePhone.

On Acer Chromebook R13, the device is powered-up and controller by the
Embedded Controller. Therefore the dt-bindings requires
only the 'compatible' and 'reg' properties.

In v4 of this set, the device was added as an 'mfd' device
and an additional 'bridge' device for the HDMI-DP conversion, see [1].
In this version we add the device as a typec controller.

[1] https://lkml.org/lkml/2020/3/18/64

Changes from v4:
Send the device as a typec controller instead of mfd.
The bridge driver should therefore convert from a platform
driver to an i2c driver.

Dafna Hirschfeld (1):
  dt-bindings: usb: add analogix,anx7688.yaml

Enric Balletbo i Serra (1):
  drm/bridge: anx7688: Add ANX7688 bridge driver support

 .../bindings/usb/analogix,anx7688.yaml        | 177 +++++++++++++++++
 drivers/gpu/drm/bridge/analogix/Kconfig       |  11 ++
 drivers/gpu/drm/bridge/analogix/Makefile      |   1 +
 .../drm/bridge/analogix/analogix-anx7688.c    | 186 ++++++++++++++++++
 4 files changed, 375 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/analogix,anx7688.yaml
 create mode 100644 drivers/gpu/drm/bridge/analogix/analogix-anx7688.c