| Message ID | 20210429073050.21039-1-peng.fan@oss.nxp.com |
|---|---|
| Headers | show |
| Series | soc: imx: gpcv2: support i.MX8MM | expand |
On Thu, Apr 29, 2021 at 1:59 AM Peng Fan (OSS) <peng.fan@oss.nxp.com> wrote: > > From: Peng Fan <peng.fan@nxp.com> > > This patchset is a pick up Lucas's gpcv2 work for i.MX8MM and several > minor changes from me to make it could work with i.MX BLK-CTL driver. > > Thanks for Lucas's work and suggestion, Frieder Schrempf for collecting > all the patches, Jacky Bai on help debug issues. Thank for you all the work. I have an i.MX8M Nano that I'll work to add support for gpcv2 unless NXP has started this already. At one time, I posted some patches for Nano based on Lucas' work, but since that work wasn't accepted, mine wasn't either. adam > > Lucas Stach (12): > soc: imx: gpcv2: move to more ideomatic error handling in probe > soc: imx: gpcv2: move domain mapping to domain driver probe > soc: imx: gpcv2: switch to clk_bulk_* API > soc: imx: gpcv2: split power up and power down sequence control > soc: imx: gpcv2: wait for ADB400 handshake > soc: imx: gpcv2: add runtime PM support for power-domains > soc: imx: gpcv2: allow domains without power-sequence control > dt-bindings: imx: gpcv2: add support for optional resets > soc: imx: gpcv2: add support for optional resets > dt-bindings: power: add defines for i.MX8MM power domains > soc: imx: gpcv2: add support for i.MX8MM power domains > soc: imx: gpcv2: Add support for missing i.MX8MM VPU/DISPMIX power > domains > > Peng Fan (4): > soc: imx: gpcv2: correct pm_runtime_get_sync usage > soc: imx: gpcv2: move reset assert after requesting domain power up > soc: imx: gpcv2: support reset defer probe > soc: imx: gpcv2: remove waiting handshake in power up > > .../bindings/power/fsl,imx-gpcv2.yaml | 9 + > drivers/soc/imx/gpcv2.c | 534 ++++++++++++++---- > include/dt-bindings/power/imx8mm-power.h | 22 + > 3 files changed, 450 insertions(+), 115 deletions(-) > create mode 100644 include/dt-bindings/power/imx8mm-power.h > > -- > 2.30.0 >
> Subject: Re: [PATCH 00/16] soc: imx: gpcv2: support i.MX8MM > > On Thu, Apr 29, 2021 at 1:59 AM Peng Fan (OSS) <peng.fan@oss.nxp.com> > wrote: > > > > From: Peng Fan <peng.fan@nxp.com> > > > > This patchset is a pick up Lucas's gpcv2 work for i.MX8MM and several > > minor changes from me to make it could work with i.MX BLK-CTL driver. > > > > Thanks for Lucas's work and suggestion, Frieder Schrempf for > > collecting all the patches, Jacky Bai on help debug issues. > > Thank for you all the work. I have an i.MX8M Nano that I'll work to add > support for gpcv2 unless NXP has started this already. At one time, I posted > some patches for Nano based on Lucas' work, but since that work wasn't > accepted, mine wasn't either. Please continue your work on i.MX8MN, I not work on this. The following work from me is i.MX8MP. Thanks, Peng. > > adam > > > > Lucas Stach (12): > > soc: imx: gpcv2: move to more ideomatic error handling in probe > > soc: imx: gpcv2: move domain mapping to domain driver probe > > soc: imx: gpcv2: switch to clk_bulk_* API > > soc: imx: gpcv2: split power up and power down sequence control > > soc: imx: gpcv2: wait for ADB400 handshake > > soc: imx: gpcv2: add runtime PM support for power-domains > > soc: imx: gpcv2: allow domains without power-sequence control > > dt-bindings: imx: gpcv2: add support for optional resets > > soc: imx: gpcv2: add support for optional resets > > dt-bindings: power: add defines for i.MX8MM power domains > > soc: imx: gpcv2: add support for i.MX8MM power domains > > soc: imx: gpcv2: Add support for missing i.MX8MM VPU/DISPMIX power > > domains > > > > Peng Fan (4): > > soc: imx: gpcv2: correct pm_runtime_get_sync usage > > soc: imx: gpcv2: move reset assert after requesting domain power up > > soc: imx: gpcv2: support reset defer probe > > soc: imx: gpcv2: remove waiting handshake in power up > > > > .../bindings/power/fsl,imx-gpcv2.yaml | 9 + > > drivers/soc/imx/gpcv2.c | 534 > ++++++++++++++---- > > include/dt-bindings/power/imx8mm-power.h | 22 + > > 3 files changed, 450 insertions(+), 115 deletions(-) create mode > > 100644 include/dt-bindings/power/imx8mm-power.h > > > > -- > > 2.30.0 > >
On Thu, Apr 29, 2021 at 8:34 PM Peng Fan <peng.fan@nxp.com> wrote: > > > Subject: Re: [PATCH 00/16] soc: imx: gpcv2: support i.MX8MM > > > > On Thu, Apr 29, 2021 at 1:59 AM Peng Fan (OSS) <peng.fan@oss.nxp.com> > > wrote: > > > > > > From: Peng Fan <peng.fan@nxp.com> > > > > > > This patchset is a pick up Lucas's gpcv2 work for i.MX8MM and several > > > minor changes from me to make it could work with i.MX BLK-CTL driver. > > > > > > Thanks for Lucas's work and suggestion, Frieder Schrempf for > > > collecting all the patches, Jacky Bai on help debug issues. > > > > Thank for you all the work. I have an i.MX8M Nano that I'll work to add > > support for gpcv2 unless NXP has started this already. At one time, I posted > > some patches for Nano based on Lucas' work, but since that work wasn't > > accepted, mine wasn't either. > > Please continue your work on i.MX8MN, I not work on this. The following > work from me is i.MX8MP. No problem. I thought the focus would be on the 8MP,m so I went ahead and posted a series [1] for enabling the gpcv2 for the Nano and the power domains which don't require blk-ctl for now which include the USB OTG, and the GPU. If you and/or your colleagues have time to review it, it would be appreciated. I was able to suspend and resume with USB attached, and it continued to operate. I didn't do extensive testing yet. I'm starting on the blk-ctl stuff now. It seems to have changed quite a bit since the initial submission from Abel, so I'll have to spend a bit more time porting what I had before. Thanks again for this series. It will be nice to have the Mini, Nano and Plus domains functional. adam [1] - https://patchwork.kernel.org/project/linux-arm-kernel/patch/20210429211625.1835702-2-aford173@gmail.com/ > > Thanks, > Peng. > > > > > adam > > > > > > Lucas Stach (12): > > > soc: imx: gpcv2: move to more ideomatic error handling in probe > > > soc: imx: gpcv2: move domain mapping to domain driver probe > > > soc: imx: gpcv2: switch to clk_bulk_* API > > > soc: imx: gpcv2: split power up and power down sequence control > > > soc: imx: gpcv2: wait for ADB400 handshake > > > soc: imx: gpcv2: add runtime PM support for power-domains > > > soc: imx: gpcv2: allow domains without power-sequence control > > > dt-bindings: imx: gpcv2: add support for optional resets > > > soc: imx: gpcv2: add support for optional resets > > > dt-bindings: power: add defines for i.MX8MM power domains > > > soc: imx: gpcv2: add support for i.MX8MM power domains > > > soc: imx: gpcv2: Add support for missing i.MX8MM VPU/DISPMIX power > > > domains > > > > > > Peng Fan (4): > > > soc: imx: gpcv2: correct pm_runtime_get_sync usage > > > soc: imx: gpcv2: move reset assert after requesting domain power up > > > soc: imx: gpcv2: support reset defer probe > > > soc: imx: gpcv2: remove waiting handshake in power up > > > > > > .../bindings/power/fsl,imx-gpcv2.yaml | 9 + > > > drivers/soc/imx/gpcv2.c | 534 > > ++++++++++++++---- > > > include/dt-bindings/power/imx8mm-power.h | 22 + > > > 3 files changed, 450 insertions(+), 115 deletions(-) create mode > > > 100644 include/dt-bindings/power/imx8mm-power.h > > > > > > -- > > > 2.30.0 > > >
From: Peng Fan <peng.fan@nxp.com> This patchset is a pick up Lucas's gpcv2 work for i.MX8MM and several minor changes from me to make it could work with i.MX BLK-CTL driver. Thanks for Lucas's work and suggestion, Frieder Schrempf for collecting all the patches, Jacky Bai on help debug issues. Lucas Stach (12): soc: imx: gpcv2: move to more ideomatic error handling in probe soc: imx: gpcv2: move domain mapping to domain driver probe soc: imx: gpcv2: switch to clk_bulk_* API soc: imx: gpcv2: split power up and power down sequence control soc: imx: gpcv2: wait for ADB400 handshake soc: imx: gpcv2: add runtime PM support for power-domains soc: imx: gpcv2: allow domains without power-sequence control dt-bindings: imx: gpcv2: add support for optional resets soc: imx: gpcv2: add support for optional resets dt-bindings: power: add defines for i.MX8MM power domains soc: imx: gpcv2: add support for i.MX8MM power domains soc: imx: gpcv2: Add support for missing i.MX8MM VPU/DISPMIX power domains Peng Fan (4): soc: imx: gpcv2: correct pm_runtime_get_sync usage soc: imx: gpcv2: move reset assert after requesting domain power up soc: imx: gpcv2: support reset defer probe soc: imx: gpcv2: remove waiting handshake in power up .../bindings/power/fsl,imx-gpcv2.yaml | 9 + drivers/soc/imx/gpcv2.c | 534 ++++++++++++++---- include/dt-bindings/power/imx8mm-power.h | 22 + 3 files changed, 450 insertions(+), 115 deletions(-) create mode 100644 include/dt-bindings/power/imx8mm-power.h -- 2.30.0