| Message ID | 20210727101051.24418-1-yunfei.dong@mediatek.com |
|---|---|
| Headers | show |
| Series | Using component framework to support multi hardware decode | expand |
Thank you for the patchset. Could you provide information on how you tested the code. Did you test it on chromeos userspace? Did you use the test-tast framework? What tests did you run? Dafna On 27.07.21 12:10, Yunfei Dong wrote: > This series adds support for multi hardware decode into mtk-vcodec, by first > adding component framework to manage each hardware information: interrupt, > clock, register bases and power. Secondly add core thread to deal with core > hardware message, at the same time, add msg queue for different hardware > share messages. Lastly, the architecture of different specs are not the same, > using specs type to separate them. > > This series has been tested with both MT8183 and MT8173. Decoding was working > for both chips. > > Patches 1,2 rewrite get register bases and power on/off interface. > > Patch 3-5 add component framework to support multi hardware. > > Patches 6-14 add interfaces to support core hardware. > ---- > This patch dependents on "media: mtk-vcodec: support for MT8183 decoder"[1]. > > Multi hardware decode is based on stateless decoder, MT8183 is the first time > to add stateless decoder. Otherwise it will cause conflict. Please also accept > this patch together with [1]. > > [1]https://lore.kernel.org/patchwork/project/lkml/list/?series=507084 > ---- > Changes compared with v2: > - Fix return value for patch 1/15 > - Add this new patch to align vdec and venc wake up ctx interface for patch 2/15 > - Fix comments for patch 4/15 > - Change txt files to yaml for patch 5/15 > - Generalize wake up ctx interface for stateless and stateful decode for patch 7/15 > - Add document for structs and functions for patch 8/15 > - Add condition to check the return value of kthread_run for patch 11/15 > - Fix yaml check fail for patch 13/15 > > Changes compared with v1: > - Fix many comments for patch 3/14 > - Remove unnecessary code for patch 4/14 > - Using enum mtk_vdec_hw_count instead of magic numbers for patch 6/14 > - Reconstructed get/put lat buffer for lat and core hardware for patch 7/14 > - Using yaml format to instead of txt file for patch 12/14 > > Yunfei Dong (15): > media: mtk-vcodec: Get numbers of register bases from DT > media: mtk-vcodec: Align vcodec wake up interrupt interface > media: mtk-vcodec: Refactor vcodec pm interface > media: mtk-vcodec: Use component framework to manage each hardware > information > dt-bindings: media: mtk-vcodec: Separate video encoder and decoder > dt-bindings > media: mtk-vcodec: Use pure single core for MT8183 > media: mtk-vcodec: Add irq interface for multi hardware > media: mtk-vcodec: Add msg queue feature for lat and core architecture > media: mtk-vcodec: Generalize power and clock on/off interfaces > media: mtk-vcodec: Add new interface to lock different hardware > media: mtk-vcodec: Add core thread > media: mtk-vcodec: Support 34bits dma address for vdec > dt-bindings: media: mtk-vcodec: Adds decoder dt-bindings for mt8192 > media: mtk-vcodec: Add core dec and dec end ipi msg > media: mtk-vcodec: Use codec type to separate different hardware > > .../media/mediatek,vcodec-comp-decoder.yaml | 154 +++++++++ > .../media/mediatek,vcodec-decoder.yaml | 138 ++++++++ > .../media/mediatek,vcodec-encoder.yaml | 128 ++++++++ > .../bindings/media/mediatek-vcodec.txt | 130 -------- > drivers/media/platform/mtk-vcodec/Makefile | 2 + > .../platform/mtk-vcodec/mtk_vcodec_dec.c | 4 +- > .../platform/mtk-vcodec/mtk_vcodec_dec.h | 1 + > .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 296 +++++++++++++++--- > .../platform/mtk-vcodec/mtk_vcodec_dec_hw.c | 184 +++++++++++ > .../platform/mtk-vcodec/mtk_vcodec_dec_hw.h | 48 +++ > .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 98 ++++-- > .../platform/mtk-vcodec/mtk_vcodec_dec_pm.h | 13 +- > .../mtk-vcodec/mtk_vcodec_dec_stateful.c | 1 + > .../mtk-vcodec/mtk_vcodec_dec_stateless.c | 1 + > .../platform/mtk-vcodec/mtk_vcodec_drv.h | 76 ++++- > .../platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 12 +- > .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 1 - > .../platform/mtk-vcodec/mtk_vcodec_intr.c | 27 +- > .../platform/mtk-vcodec/mtk_vcodec_intr.h | 4 +- > .../platform/mtk-vcodec/mtk_vcodec_util.c | 87 ++++- > .../platform/mtk-vcodec/mtk_vcodec_util.h | 8 +- > .../platform/mtk-vcodec/vdec/vdec_h264_if.c | 2 +- > .../mtk-vcodec/vdec/vdec_h264_req_if.c | 2 +- > .../platform/mtk-vcodec/vdec/vdec_vp8_if.c | 2 +- > .../platform/mtk-vcodec/vdec/vdec_vp9_if.c | 2 +- > .../media/platform/mtk-vcodec/vdec_drv_if.c | 21 +- > .../media/platform/mtk-vcodec/vdec_ipi_msg.h | 16 +- > .../platform/mtk-vcodec/vdec_msg_queue.c | 290 +++++++++++++++++ > .../platform/mtk-vcodec/vdec_msg_queue.h | 157 ++++++++++ > .../media/platform/mtk-vcodec/vdec_vpu_if.c | 46 ++- > .../media/platform/mtk-vcodec/vdec_vpu_if.h | 22 ++ > .../platform/mtk-vcodec/venc/venc_h264_if.c | 2 +- > .../platform/mtk-vcodec/venc/venc_vp8_if.c | 2 +- > 33 files changed, 1697 insertions(+), 280 deletions(-) > create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-comp-decoder.yaml > create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml > create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml > delete mode 100644 Documentation/devicetree/bindings/media/mediatek-vcodec.txt > create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.c > create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h > create mode 100644 drivers/media/platform/mtk-vcodec/vdec_msg_queue.c > create mode 100644 drivers/media/platform/mtk-vcodec/vdec_msg_queue.h >
On Tue, 2021-07-27 at 12:55 +0200, Dafna Hirschfeld wrote: > Thank you for the patchset. > > Could you provide information on how you > tested the code. > Did you test it on chromeos userspace? > Did you use the test-tast framework? > What tests did you run? > > Dafna > Hi Dafna, I just merge the code to kernel 4.19 and build pass. When the system boot up, I will play some vdec h264/vp8/vp9 bitstreams. The code should be ok when all bitstreams can play well. For MT8173 is statefull decode, I won't change the arch and component is used for stateless decode(mt8192), mt8183 not use component arch also. Only if decode driver can play well, the change should be ok for mt8173. I needn't to do tast test for mt8173 for the arch not be changed. Thanks, Yunfei Dong > > On 27.07.21 12:10, Yunfei Dong wrote: > > This series adds support for multi hardware decode into mtk-vcodec, by first > > adding component framework to manage each hardware information: interrupt, > > clock, register bases and power. Secondly add core thread to deal with core > > hardware message, at the same time, add msg queue for different hardware > > share messages. Lastly, the architecture of different specs are not the same, > > using specs type to separate them. > > > > This series has been tested with both MT8183 and MT8173. Decoding was working > > for both chips. > > > > Patches 1,2 rewrite get register bases and power on/off interface. > > > > Patch 3-5 add component framework to support multi hardware. > > > > Patches 6-14 add interfaces to support core hardware. > > ---- > > This patch dependents on "media: mtk-vcodec: support for MT8183 decoder"[1]. > > > > Multi hardware decode is based on stateless decoder, MT8183 is the first time > > to add stateless decoder. Otherwise it will cause conflict. Please also accept > > this patch together with [1]. > > > > [1]https://lore.kernel.org/patchwork/project/lkml/list/?series=507084 > > ---- > > Changes compared with v2: > > - Fix return value for patch 1/15 > > - Add this new patch to align vdec and venc wake up ctx interface for patch 2/15 > > - Fix comments for patch 4/15 > > - Change txt files to yaml for patch 5/15 > > - Generalize wake up ctx interface for stateless and stateful decode for patch 7/15 > > - Add document for structs and functions for patch 8/15 > > - Add condition to check the return value of kthread_run for patch 11/15 > > - Fix yaml check fail for patch 13/15 > > > > Changes compared with v1: > > - Fix many comments for patch 3/14 > > - Remove unnecessary code for patch 4/14 > > - Using enum mtk_vdec_hw_count instead of magic numbers for patch 6/14 > > - Reconstructed get/put lat buffer for lat and core hardware for patch 7/14 > > - Using yaml format to instead of txt file for patch 12/14 > > > > Yunfei Dong (15): > > media: mtk-vcodec: Get numbers of register bases from DT > > media: mtk-vcodec: Align vcodec wake up interrupt interface > > media: mtk-vcodec: Refactor vcodec pm interface > > media: mtk-vcodec: Use component framework to manage each hardware > > information > > dt-bindings: media: mtk-vcodec: Separate video encoder and decoder > > dt-bindings > > media: mtk-vcodec: Use pure single core for MT8183 > > media: mtk-vcodec: Add irq interface for multi hardware > > media: mtk-vcodec: Add msg queue feature for lat and core architecture > > media: mtk-vcodec: Generalize power and clock on/off interfaces > > media: mtk-vcodec: Add new interface to lock different hardware > > media: mtk-vcodec: Add core thread > > media: mtk-vcodec: Support 34bits dma address for vdec > > dt-bindings: media: mtk-vcodec: Adds decoder dt-bindings for mt8192 > > media: mtk-vcodec: Add core dec and dec end ipi msg > > media: mtk-vcodec: Use codec type to separate different hardware > > > > .../media/mediatek,vcodec-comp-decoder.yaml | 154 +++++++++ > > .../media/mediatek,vcodec-decoder.yaml | 138 ++++++++ > > .../media/mediatek,vcodec-encoder.yaml | 128 ++++++++ > > .../bindings/media/mediatek-vcodec.txt | 130 -------- > > drivers/media/platform/mtk-vcodec/Makefile | 2 + > > .../platform/mtk-vcodec/mtk_vcodec_dec.c | 4 +- > > .../platform/mtk-vcodec/mtk_vcodec_dec.h | 1 + > > .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 296 +++++++++++++++--- > > .../platform/mtk-vcodec/mtk_vcodec_dec_hw.c | 184 +++++++++++ > > .../platform/mtk-vcodec/mtk_vcodec_dec_hw.h | 48 +++ > > .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 98 ++++-- > > .../platform/mtk-vcodec/mtk_vcodec_dec_pm.h | 13 +- > > .../mtk-vcodec/mtk_vcodec_dec_stateful.c | 1 + > > .../mtk-vcodec/mtk_vcodec_dec_stateless.c | 1 + > > .../platform/mtk-vcodec/mtk_vcodec_drv.h | 76 ++++- > > .../platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 12 +- > > .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 1 - > > .../platform/mtk-vcodec/mtk_vcodec_intr.c | 27 +- > > .../platform/mtk-vcodec/mtk_vcodec_intr.h | 4 +- > > .../platform/mtk-vcodec/mtk_vcodec_util.c | 87 ++++- > > .../platform/mtk-vcodec/mtk_vcodec_util.h | 8 +- > > .../platform/mtk-vcodec/vdec/vdec_h264_if.c | 2 +- > > .../mtk-vcodec/vdec/vdec_h264_req_if.c | 2 +- > > .../platform/mtk-vcodec/vdec/vdec_vp8_if.c | 2 +- > > .../platform/mtk-vcodec/vdec/vdec_vp9_if.c | 2 +- > > .../media/platform/mtk-vcodec/vdec_drv_if.c | 21 +- > > .../media/platform/mtk-vcodec/vdec_ipi_msg.h | 16 +- > > .../platform/mtk-vcodec/vdec_msg_queue.c | 290 +++++++++++++++++ > > .../platform/mtk-vcodec/vdec_msg_queue.h | 157 ++++++++++ > > .../media/platform/mtk-vcodec/vdec_vpu_if.c | 46 ++- > > .../media/platform/mtk-vcodec/vdec_vpu_if.h | 22 ++ > > .../platform/mtk-vcodec/venc/venc_h264_if.c | 2 +- > > .../platform/mtk-vcodec/venc/venc_vp8_if.c | 2 +- > > 33 files changed, 1697 insertions(+), 280 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-comp-decoder.yaml > > create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml > > create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml > > delete mode 100644 Documentation/devicetree/bindings/media/mediatek-vcodec.txt > > create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.c > > create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h > > create mode 100644 drivers/media/platform/mtk-vcodec/vdec_msg_queue.c > > create mode 100644 drivers/media/platform/mtk-vcodec/vdec_msg_queue.h > >
On 29.07.21 10:08, yunfei dong wrote: > On Tue, 2021-07-27 at 12:55 +0200, Dafna Hirschfeld wrote: >> Thank you for the patchset. >> >> Could you provide information on how you >> tested the code. >> Did you test it on chromeos userspace? >> Did you use the test-tast framework? >> What tests did you run? >> >> Dafna >> > Hi Dafna, > > I just merge the code to kernel 4.19 and build pass. Since those patches are sent to upstream , you should probably also make sure that they are built on the media_tree repo. > When the system boot up, I will play some vdec h264/vp8/vp9 bitstreams. > The code should be ok when all bitstreams can play well. > > For MT8173 is statefull decode, I won't change the arch and component is > used for stateless decode(mt8192), mt8183 not use component arch also. > Only if decode driver can play well, the change should be ok for mt8173. > > I needn't to do tast test for mt8173 for the arch not be changed. But the frist patches in that series are general bug fixes that influance all arch Thanks, Dafna > > Thanks, > Yunfei Dong >> >> On 27.07.21 12:10, Yunfei Dong wrote: >>> This series adds support for multi hardware decode into mtk-vcodec, by first >>> adding component framework to manage each hardware information: interrupt, >>> clock, register bases and power. Secondly add core thread to deal with core >>> hardware message, at the same time, add msg queue for different hardware >>> share messages. Lastly, the architecture of different specs are not the same, >>> using specs type to separate them. >>> >>> This series has been tested with both MT8183 and MT8173. Decoding was working >>> for both chips. >>> >>> Patches 1,2 rewrite get register bases and power on/off interface. >>> >>> Patch 3-5 add component framework to support multi hardware. >>> >>> Patches 6-14 add interfaces to support core hardware. >>> ---- >>> This patch dependents on "media: mtk-vcodec: support for MT8183 decoder"[1]. >>> >>> Multi hardware decode is based on stateless decoder, MT8183 is the first time >>> to add stateless decoder. Otherwise it will cause conflict. Please also accept >>> this patch together with [1]. >>> >>> [1]https://lore.kernel.org/patchwork/project/lkml/list/?series=507084 >>> ---- >>> Changes compared with v2: >>> - Fix return value for patch 1/15 >>> - Add this new patch to align vdec and venc wake up ctx interface for patch 2/15 >>> - Fix comments for patch 4/15 >>> - Change txt files to yaml for patch 5/15 >>> - Generalize wake up ctx interface for stateless and stateful decode for patch 7/15 >>> - Add document for structs and functions for patch 8/15 >>> - Add condition to check the return value of kthread_run for patch 11/15 >>> - Fix yaml check fail for patch 13/15 >>> >>> Changes compared with v1: >>> - Fix many comments for patch 3/14 >>> - Remove unnecessary code for patch 4/14 >>> - Using enum mtk_vdec_hw_count instead of magic numbers for patch 6/14 >>> - Reconstructed get/put lat buffer for lat and core hardware for patch 7/14 >>> - Using yaml format to instead of txt file for patch 12/14 >>> >>> Yunfei Dong (15): >>> media: mtk-vcodec: Get numbers of register bases from DT >>> media: mtk-vcodec: Align vcodec wake up interrupt interface >>> media: mtk-vcodec: Refactor vcodec pm interface >>> media: mtk-vcodec: Use component framework to manage each hardware >>> information >>> dt-bindings: media: mtk-vcodec: Separate video encoder and decoder >>> dt-bindings >>> media: mtk-vcodec: Use pure single core for MT8183 >>> media: mtk-vcodec: Add irq interface for multi hardware >>> media: mtk-vcodec: Add msg queue feature for lat and core architecture >>> media: mtk-vcodec: Generalize power and clock on/off interfaces >>> media: mtk-vcodec: Add new interface to lock different hardware >>> media: mtk-vcodec: Add core thread >>> media: mtk-vcodec: Support 34bits dma address for vdec >>> dt-bindings: media: mtk-vcodec: Adds decoder dt-bindings for mt8192 >>> media: mtk-vcodec: Add core dec and dec end ipi msg >>> media: mtk-vcodec: Use codec type to separate different hardware >>> >>> .../media/mediatek,vcodec-comp-decoder.yaml | 154 +++++++++ >>> .../media/mediatek,vcodec-decoder.yaml | 138 ++++++++ >>> .../media/mediatek,vcodec-encoder.yaml | 128 ++++++++ >>> .../bindings/media/mediatek-vcodec.txt | 130 -------- >>> drivers/media/platform/mtk-vcodec/Makefile | 2 + >>> .../platform/mtk-vcodec/mtk_vcodec_dec.c | 4 +- >>> .../platform/mtk-vcodec/mtk_vcodec_dec.h | 1 + >>> .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 296 +++++++++++++++--- >>> .../platform/mtk-vcodec/mtk_vcodec_dec_hw.c | 184 +++++++++++ >>> .../platform/mtk-vcodec/mtk_vcodec_dec_hw.h | 48 +++ >>> .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 98 ++++-- >>> .../platform/mtk-vcodec/mtk_vcodec_dec_pm.h | 13 +- >>> .../mtk-vcodec/mtk_vcodec_dec_stateful.c | 1 + >>> .../mtk-vcodec/mtk_vcodec_dec_stateless.c | 1 + >>> .../platform/mtk-vcodec/mtk_vcodec_drv.h | 76 ++++- >>> .../platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 12 +- >>> .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 1 - >>> .../platform/mtk-vcodec/mtk_vcodec_intr.c | 27 +- >>> .../platform/mtk-vcodec/mtk_vcodec_intr.h | 4 +- >>> .../platform/mtk-vcodec/mtk_vcodec_util.c | 87 ++++- >>> .../platform/mtk-vcodec/mtk_vcodec_util.h | 8 +- >>> .../platform/mtk-vcodec/vdec/vdec_h264_if.c | 2 +- >>> .../mtk-vcodec/vdec/vdec_h264_req_if.c | 2 +- >>> .../platform/mtk-vcodec/vdec/vdec_vp8_if.c | 2 +- >>> .../platform/mtk-vcodec/vdec/vdec_vp9_if.c | 2 +- >>> .../media/platform/mtk-vcodec/vdec_drv_if.c | 21 +- >>> .../media/platform/mtk-vcodec/vdec_ipi_msg.h | 16 +- >>> .../platform/mtk-vcodec/vdec_msg_queue.c | 290 +++++++++++++++++ >>> .../platform/mtk-vcodec/vdec_msg_queue.h | 157 ++++++++++ >>> .../media/platform/mtk-vcodec/vdec_vpu_if.c | 46 ++- >>> .../media/platform/mtk-vcodec/vdec_vpu_if.h | 22 ++ >>> .../platform/mtk-vcodec/venc/venc_h264_if.c | 2 +- >>> .../platform/mtk-vcodec/venc/venc_vp8_if.c | 2 +- >>> 33 files changed, 1697 insertions(+), 280 deletions(-) >>> create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-comp-decoder.yaml >>> create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml >>> create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml >>> delete mode 100644 Documentation/devicetree/bindings/media/mediatek-vcodec.txt >>> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.c >>> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h >>> create mode 100644 drivers/media/platform/mtk-vcodec/vdec_msg_queue.c >>> create mode 100644 drivers/media/platform/mtk-vcodec/vdec_msg_queue.h >>> >
This series adds support for multi hardware decode into mtk-vcodec, by first adding component framework to manage each hardware information: interrupt, clock, register bases and power. Secondly add core thread to deal with core hardware message, at the same time, add msg queue for different hardware share messages. Lastly, the architecture of different specs are not the same, using specs type to separate them. This series has been tested with both MT8183 and MT8173. Decoding was working for both chips. Patches 1,2 rewrite get register bases and power on/off interface. Patch 3-5 add component framework to support multi hardware. Patches 6-14 add interfaces to support core hardware. ---- This patch dependents on "media: mtk-vcodec: support for MT8183 decoder"[1]. Multi hardware decode is based on stateless decoder, MT8183 is the first time to add stateless decoder. Otherwise it will cause conflict. Please also accept this patch together with [1]. [1]https://lore.kernel.org/patchwork/project/lkml/list/?series=507084 ---- Changes compared with v2: - Fix return value for patch 1/15 - Add this new patch to align vdec and venc wake up ctx interface for patch 2/15 - Fix comments for patch 4/15 - Change txt files to yaml for patch 5/15 - Generalize wake up ctx interface for stateless and stateful decode for patch 7/15 - Add document for structs and functions for patch 8/15 - Add condition to check the return value of kthread_run for patch 11/15 - Fix yaml check fail for patch 13/15 Changes compared with v1: - Fix many comments for patch 3/14 - Remove unnecessary code for patch 4/14 - Using enum mtk_vdec_hw_count instead of magic numbers for patch 6/14 - Reconstructed get/put lat buffer for lat and core hardware for patch 7/14 - Using yaml format to instead of txt file for patch 12/14 Yunfei Dong (15): media: mtk-vcodec: Get numbers of register bases from DT media: mtk-vcodec: Align vcodec wake up interrupt interface media: mtk-vcodec: Refactor vcodec pm interface media: mtk-vcodec: Use component framework to manage each hardware information dt-bindings: media: mtk-vcodec: Separate video encoder and decoder dt-bindings media: mtk-vcodec: Use pure single core for MT8183 media: mtk-vcodec: Add irq interface for multi hardware media: mtk-vcodec: Add msg queue feature for lat and core architecture media: mtk-vcodec: Generalize power and clock on/off interfaces media: mtk-vcodec: Add new interface to lock different hardware media: mtk-vcodec: Add core thread media: mtk-vcodec: Support 34bits dma address for vdec dt-bindings: media: mtk-vcodec: Adds decoder dt-bindings for mt8192 media: mtk-vcodec: Add core dec and dec end ipi msg media: mtk-vcodec: Use codec type to separate different hardware .../media/mediatek,vcodec-comp-decoder.yaml | 154 +++++++++ .../media/mediatek,vcodec-decoder.yaml | 138 ++++++++ .../media/mediatek,vcodec-encoder.yaml | 128 ++++++++ .../bindings/media/mediatek-vcodec.txt | 130 -------- drivers/media/platform/mtk-vcodec/Makefile | 2 + .../platform/mtk-vcodec/mtk_vcodec_dec.c | 4 +- .../platform/mtk-vcodec/mtk_vcodec_dec.h | 1 + .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 296 +++++++++++++++--- .../platform/mtk-vcodec/mtk_vcodec_dec_hw.c | 184 +++++++++++ .../platform/mtk-vcodec/mtk_vcodec_dec_hw.h | 48 +++ .../platform/mtk-vcodec/mtk_vcodec_dec_pm.c | 98 ++++-- .../platform/mtk-vcodec/mtk_vcodec_dec_pm.h | 13 +- .../mtk-vcodec/mtk_vcodec_dec_stateful.c | 1 + .../mtk-vcodec/mtk_vcodec_dec_stateless.c | 1 + .../platform/mtk-vcodec/mtk_vcodec_drv.h | 76 ++++- .../platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 12 +- .../platform/mtk-vcodec/mtk_vcodec_enc_pm.c | 1 - .../platform/mtk-vcodec/mtk_vcodec_intr.c | 27 +- .../platform/mtk-vcodec/mtk_vcodec_intr.h | 4 +- .../platform/mtk-vcodec/mtk_vcodec_util.c | 87 ++++- .../platform/mtk-vcodec/mtk_vcodec_util.h | 8 +- .../platform/mtk-vcodec/vdec/vdec_h264_if.c | 2 +- .../mtk-vcodec/vdec/vdec_h264_req_if.c | 2 +- .../platform/mtk-vcodec/vdec/vdec_vp8_if.c | 2 +- .../platform/mtk-vcodec/vdec/vdec_vp9_if.c | 2 +- .../media/platform/mtk-vcodec/vdec_drv_if.c | 21 +- .../media/platform/mtk-vcodec/vdec_ipi_msg.h | 16 +- .../platform/mtk-vcodec/vdec_msg_queue.c | 290 +++++++++++++++++ .../platform/mtk-vcodec/vdec_msg_queue.h | 157 ++++++++++ .../media/platform/mtk-vcodec/vdec_vpu_if.c | 46 ++- .../media/platform/mtk-vcodec/vdec_vpu_if.h | 22 ++ .../platform/mtk-vcodec/venc/venc_h264_if.c | 2 +- .../platform/mtk-vcodec/venc/venc_vp8_if.c | 2 +- 33 files changed, 1697 insertions(+), 280 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-comp-decoder.yaml create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml create mode 100644 Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml delete mode 100644 Documentation/devicetree/bindings/media/mediatek-vcodec.txt create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.c create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.h create mode 100644 drivers/media/platform/mtk-vcodec/vdec_msg_queue.c create mode 100644 drivers/media/platform/mtk-vcodec/vdec_msg_queue.h