mbox series

[v4,0/5] Add PolarFire SoC Fabric Clock Conditioning Circuitry Support

Message ID 20220830122855.2207752-1-conor.dooley@microchip.com
Headers show
Series Add PolarFire SoC Fabric Clock Conditioning Circuitry Support | expand

Message

Conor Dooley Aug. 30, 2022, 12:28 p.m. UTC 
Hey all,

PolarFire SoC has 4 clock source blocks, each with 2 PLLs and 2 DLLs,
in the corners of the FPGA fabric. Add bindings, a driver supporting
the PLLs and the requisite changes to the devicetrees for PolarFire
SoC based boards. These clocks were already in use, but which clock
specifically was chosen was decided by the synthesis tool. In our
end-of-September release of our FPGA reference design, constraints will
be added to force the synthesis tool to pick the "north west" CCC,
making it possible to read the configuration from the CCC's registers.

There are no maintainers changes in this series, but they are required
due to the binding rename. I am waiting for some changes queued in the
soc tree before rebasing on a later -rc before including that patch.

The dts patch conflicts with some other dts patches I have submitted,
so I will take the final patch myself once the rest of this is
applied.

Thanks,
Conor.

Changes since v3:
- return devm_of_clk_add_hw_provider() directly in probe
- add a `hw_data.num = num_clks` that got lost along the way somewhere
- mark all output clocks as CLK_DIVIDER_ONE_BASED

Changes since v2:
- Removed the unintentionaly leftover clock-output-names
- Dropped the riscv/microchip dt-binding update. I am moving it to
  another series so that another series for the dts, which is likely to
  be applied first would not depend on this series.

Changes since v1:
- Stopped using the dt node name to generate the clk name. Rather than
  use clock-output-names etc, I just opted to call each PLL after it's
  individual base address:
  cccrefclk
    ccc@38100000_pll0
      ccc@38100000_pll0_out3
      ccc@38100000_pll0_out2
      ccc@38100000_pll0_out1
      ccc@38100000_pll0_out0
- dt nodes are now all called "clock-controller"

Conor Dooley (5):
  dt-bindings: clk: rename mpfs-clkcfg binding
  dt-bindings: clk: document PolarFire SoC fabric clocks
  dt-bindings: clk: add PolarFire SoC fabric clock ids
  clk: microchip: add PolarFire SoC fabric clock support
  riscv: dts: microchip: add the mpfs' fabric clock control

 .../bindings/clock/microchip,mpfs-ccc.yaml    |  80 +++++
 ...p,mpfs.yaml => microchip,mpfs-clkcfg.yaml} |   2 +-
 .../dts/microchip/mpfs-icicle-kit-fabric.dtsi |  27 +-
 .../boot/dts/microchip/mpfs-icicle-kit.dts    |   4 +
 .../dts/microchip/mpfs-polarberry-fabric.dtsi |   5 +
 arch/riscv/boot/dts/microchip/mpfs.dtsi       |  34 +-
 drivers/clk/microchip/Makefile                |   1 +
 drivers/clk/microchip/clk-mpfs-ccc.c          | 290 ++++++++++++++++++
 .../dt-bindings/clock/microchip,mpfs-clock.h  |  23 ++
 9 files changed, 453 insertions(+), 13 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml
 rename Documentation/devicetree/bindings/clock/{microchip,mpfs.yaml => microchip,mpfs-clkcfg.yaml} (96%)
 create mode 100644 drivers/clk/microchip/clk-mpfs-ccc.c


base-commit: b90cb1053190353cc30f0fef0ef1f378ccc063c5