mbox series

[v8,0/5] add imx8dxl evk support

Message ID 20220914135848.118616-1-shenwei.wang@nxp.com
Headers show
Series add imx8dxl evk support | expand

Message

Shenwei Wang Sept. 14, 2022, 1:58 p.m. UTC 
i.MX8DXL is a device targeting the automotive and industrial market
segments. The chip is designed to achieve both high performance and
low power consumption. It has a dual (2x) Cortex-A35 processor.

The series of patches is to add the imx8dxl soc and its evk board
support.

changes in V8:
  - change the flag of gpio phandle in reg_fec1_sel node to
    GPIO_ACTIVE_LOW to match the hardware behavior.

changes in V7:
  - move the fec1 reset gpio into its phy node

changes in V6:
  - The V6 changes mainly respond to the comments from Shawn
  - Separate the V5 patch into SoC and Board commits
  - Remove the unnecessary properties of "max-frequency"
    in usdhc2 node
  - Remove the unnecessary properties of "clk_csr" in eqos node
  - Fix several coding style problems

changes in V5:
  - change the "scu" node name to "system-controller"
  - fix the typo in the comments for imx8dxl evk board

changes in V4:
  - move i2c/mmc/serial aliases from soc to board
  - correct the node names to follow the generic names recommendation
  - remove some unused nodes in the evk board dts

changes in V3:
  - re-order the commit sequence according to Krzysztof's feedback
  - correct the syntax and styple problems pointed by Krzysztof
    (Thank you for the detailed review, Krzysztof!)
  - remove the unused nodes in imx8dxl-evk.dts
  - dt_binding_check passed

Changes in V2:
  - removed the edma2 device node because the edma v3 driver hasn't been
    upstreamed yet.
  - removed the imx8dxl_cm4 alias to fix the compile error.
  - removed the extra blank lines at EOF.
  - dt_binding_check passed.

Shenwei Wang (5):
  dt-bindings: firmware: add missing resource IDs for imx8dxl
  dt-bindings: arm: imx: update fsl.yaml for imx8dxl
  arm64: dts: imx8: add a node label to ddr-pmu
  arm64: dts: freescale: add i.MX8DXL SoC support
  arm64: dts: freescale: add support for i.MX8DXL EVK board

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../arm64/boot/dts/freescale/imx8-ss-ddr.dtsi |   2 +-
 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 426 ++++++++++++++++++
 .../boot/dts/freescale/imx8dxl-ss-adma.dtsi   |  52 +++
 .../boot/dts/freescale/imx8dxl-ss-conn.dtsi   | 142 ++++++
 .../boot/dts/freescale/imx8dxl-ss-ddr.dtsi    |   9 +
 .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi   |  74 +++
 arch/arm64/boot/dts/freescale/imx8dxl.dtsi    | 238 ++++++++++
 include/dt-bindings/firmware/imx/rsrc.h       |   7 +
 10 files changed, 956 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi

--
2.25.1