mbox series

[v2,0/4] drm/sun4i: dsi: Support the A100/D1 controller variant

Message ID 20221107053552.2330-1-samuel@sholland.org
Headers show
Series drm/sun4i: dsi: Support the A100/D1 controller variant | expand

Message

Samuel Holland Nov. 7, 2022, 5:35 a.m. UTC 
This series adds support for the digital part of the DSI controller
found in the A100 and D1 SoCs (plus T7, which is not supported by
mainline Linux). There are two changes to the hardware integration:
  1) the module clock routes through the TCON TOP, and
  2) the separate I/O domain is removed.

The actual register interface appears to be the same as before. The
register definitions in the D1 BSP exactly match the A64 BSP.

The BSP describes this as the "40nm" DSI controller variant. There is
also a "28nm" variant with a different register interface; that one is
found in a different subset of SoCs (V5 and A50).

A100/D1 also come with an updated DPHY, described by the BSP as a
"combo" PHY, which is now also used for LVDS channel 0. (LVDS and DSI
share the same pins on Port D.) Since that is a different subsystem,
I am sending that as a separate series.

Changes in v2:
 - Add the variant check to the probe error path

Samuel Holland (4):
  dt-bindings: display: sun6i-dsi: Fix clock conditional
  dt-bindings: display: sun6i-dsi: Add the A100 variant
  drm/sun4i: dsi: Add a variant structure
  drm/sun4i: dsi: Add the A100 variant

 .../display/allwinner,sun6i-a31-mipi-dsi.yaml | 30 ++++++---
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c        | 61 +++++++++++++------
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h        |  7 +++
 3 files changed, 71 insertions(+), 27 deletions(-)